• 締切済み

マウスの右と左のクリックができなくなる。。

１時間ほど前にブルースクリーンが出ました。 その後からオンラインゲーム上（リネージュ２）で右クリックと左クリックができなくなりました。 マウスはロジクールのＧ５使ってます.サイドボタンは使えます。 ゲーム以外では右クリック、左クリック共問題なく使えるんです。。 どうしたら問題なく使えるようになるんでしょうか；； 下記はブルースクリーン上にでたものです。 A problem has been detected and windows has been shut down to Prevent damage to your computer. If this is the first time you've seen this stop error screen, resart your computer.If this screen appears again,follow these steps: Run a system dignostic utilitty suplied by your hardwre mnufavtrer. In particular,run a memory check,and check for fanlty or misamtched memory.try changing video adapters. Disable or remove any newly installed hardwre and driveres.Disable or remove any newly installed software,If you need to use safe Mode to remove or diisable computers,restart your computer,press F8 to select Advanced startup options,andthen select safe Mode. Technical information: ***STOP:0x0000007F(0x0000000D,0x00000000,0x00000000,0x00000000)

みんなの回答

  • violet430
  • ベストアンサー率36% (27472/75001)
回答No.1

>0x0000007F http://support.microsoft.com/kb/137539/ja ゲームソフトの不具合を疑います。 ゲームを再インストールしてみて下さい。 それで駄目なら違うマウスを使って確認しましょう。

  1. カテゴリ
  2. パソコン・スマートフォン
  3. PCパーツ・周辺機器
  4. その他(PCパーツ・周辺機器)

関連するQ&A

  • Windows XP

    ここ最近、Windowsを開こうとすると、青い画面が出てきます。 「　A problem has been detected and windows　has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Run a system diagnostic utility supplied by your hardware manufacturer. In particular, run a memory check, and check for raulty or mismatched memory. Try changing video adapters. Diseble or remove any newly installed hardware and drivers. Disable or remove any newly installed software. If you need o use safe mode to remove or disable components, restart your computer, press F8 to select Advanced startup options, and then select safe mode. Technical information: STOP: 0×0000007F　 ( 0×0000000D, 0×00000000, 0×00000000, 0×00000000)　　」 と英語が書いてあります。 3日経っても直りません。 心当たりがあると言えば、iTunesがエラーになったので、アンインストールの手続きをしたことです。 どうやったら直りますか？ お願いします。

  • PCが立ち上がらなくなってしまい、困っています2

    先日ブルースクリーン？で困って質問した者です。 英字の内容を書きます。この場合、直るでしょうか？ A problem has been detected and windows has been shut down to provent damage to your computer. UNMOUNTABLE_BOOT_VOLME If this is the first time you've seen this stop errer screen, restart your computer.If this screen appears again,follw these steps:check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows up dates you might need. If problems continue,disable or remove any newly installed hardware or software.Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components,restart your computer,press F8 to select Adovanced start up options,and ther select safe mode. Technical information:STOP:0x000000ED(0x865C5C08,0x0000006,0x00000000,0x00000000)

  • ブルースクリーン現象になりました

    質問をさしてもらい ブルースクリーン現象ということが分かり (対処の仕方がわかりません) BlueScreenView を使い　(何個かありましたが数が多かったので何個かはりました) ブルースクリーンのところを抜き出してみました ハードディスクのバックアップはとらなくても大丈夫でしょうか A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x9589a9b8, 0x00000002, 0x00000000, 0x82ebb60b) *** ntkrnlpa.exe - Address 0x82e4ffd9 base at 0x82e02000 DateStamp 0x4cb710d6 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x00000000, 0x0000001b, 0x00000000, 0x82e95c94) *** ntkrnlpa.exe - Address 0x82e9bfd9 base at 0x82e4e000 DateStamp 0x4cb710d6 三つめ A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe CACHE_MANAGER If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information:

  • ブルースクリーンになって困っています！＞＜；

    突然　画面がフリーズしたので強制終了し再起動したらブルースクリーンになってしまいました。 PCに関する知識がないので困っています；； ブルースクリーンになった時の表示が下記です。 A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again,follow these steps: Run a system diagnostic utility supplied by your hardware manufacturer. In particular,run a memory check, and check for faulty or mismatched memory. Try changing video adapters. Disable or remove any newly installed hardware and drivers.Disable or remove any newly installed software. If you need to use Safe Mode to remove or disable components,restart your computer,press F8 to select Advanced Startup Options,and then select Safe Mode. Technical information: *** STOP: 0x0000007F (0x0000000000000008,0x0000000080050031,0x00000000000006F8, 0xFFFFF80003D59CE3) Collecting data for crash dump... Initializing disk for crash dump... 以上です。 わかる方いらっしゃいましたら是非教えてください！ よろしくお願いします。

  • BIOSを元にもどす方法

    現在、DELLのInspiron530を使っているのですが、 BIOSのバージョンを1.00から1.05にバージョンアップしたら、 パソコンをスリープ状態から起動するたびにBlueScreenになり、 　A problem has been detected and windows has been shut down to prevent damage to your computer. 　 BAD_POOL_CALLER 　If this is the first time you've seen this stop error screen,restart your computer.If this screen appears again,follow these steps: 　Check to make sure any new hardware,or software is properly installed.　 　If this is a new installation, ask your hardware or software, manufacturer for any windows updates you might need. 　If problems continu,disable or remove any newly installed hardware or software. 　If problems continue, disable or remove any newly installed hardware or software. 　Disable BIOS memory options such as caching or shadowing. 　If you need to use safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select safe mode. （以下略） という表示が出て、強制再起動になる、という症状が出るようになってしまいました。 できれば以前のバージョンにもどしたいのですが、どうやれば戻すことができるのかわかりませんでした。 だれかわかる人いたら教えてください(>_<)

  • PCを起動してもすぐに青い画面になってしまいます。

    dpgencを使用していたら突然青い画面に白字で以下の文が表示されました。 A problem has been detected and windows has been shut down to prevent damege to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again,follow these steps: Run a system diagnostic utility supplied by your hardware manufacturer.In particular, run a memory check, and check for faulty or mismatched memory.Try changing video adapters. Disable or remove any newly installed hardware and drivers.Disable or remove any newly installed software.If you need to use safe mode to remove or disable components,restart your computer,press F8 to select Advanced startup option,and then select safe mode. Technical information: ***STOP:0x0000007F(0x0000000D,0x00000000,0x00000000,0x00000000) Beginning dump of physical memory physical memory dump complete. Contact your system administrator or technical support group for further assistance. その後何度PCを起動しても、この画面になってしまい何もできない状態です。 PCの詳しいスペックは起動できないので分からないのですが、 DELL Dimension8400 WindowsXPです。 どうしたらよいのでしょうか？ どなたか教えてください、よろしくお願い致します。

  • ブルースクリーンになった

    たびたびブルースクリーンになりますが、 今回は *** STOP: 0x0000001D(0xB64F736A,0xBACD79B4,0x00000000) 前回は A problem has been detected and wiondows has been shut to down to prevent damage to your computer. ORQL-NOT-LESS-OR-EQUAL If this si thefirst time you`ve seen this stop error screen, restart your computer. If this screen again,follow these steps: check to meke sure any new hardware or spftware is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components,restart your computer, press F8 to select advanced startup option, and then select safe mode. Technical information: *** STOP: 0x0000000A (0x00000010,0x00000002,0x00000001,0x8051873C) beginning dump of physical memory physical memory dump complete. Contact your system administrator or technical support group for further assistance. 教えてください、お願いします。

  • ブルースクリーンの対処法

    質問をさしてもらい ブルースクリーンということが分かり (対処の仕方がわかりません) BlueScreenView を使い　(何個かありましたが数が多かったので何個かはりました) ブルースクリーンのところを抜き出してみました ハードディスクのバックアップはとらなくても大丈夫でしょうか A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: fltmgr.sys PAGE_FAULT_IN_NONPAGED_AREA If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x00000050 (0xd581f284, 0x00000000, 0x8b4118d9, 0x00000002) *** fltmgr.sys - Address 0x807c2ffb base at 0x807c0000 DateStamp 0x49e01907 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe ATTEMPTED_WRITE_TO_READONLY_MEMORY If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x000000be (0x993c54cc, 0x87887121, 0x8bf73c14, 0x0000000b) *** ntkrnlpa.exe - Address 0x82ed4379 base at 0x82e3c000 DateStamp 0x4cb710d6 三つめ A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: aswSP.SYS DRIVER_IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x000000d1 (0x00000000, 0x00000002, 0x00000000, 0x90e1fe38) *** aswSP.SYS - Address 0x90e1fe38 base at 0x90e05000 DateStamp 0x4d65202b

  • ブルースクリーンが起こってしまったのですが

    質問をさしてもらい ブルースクリーンということが分かり (対処の仕方がわかりません) BlueScreenView を使い　(何個かありましたが数が多かったので何個かはりました) ブルースクリーンのところを抜き出してみました ハードディスクのバックアップはとらなくても大丈夫でしょうか A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: USBPORT.SYS DRIVER_IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x000000d1 (0x0000008c, 0x00000002, 0x00000000, 0x8fbc62c4) *** USBPORT.SYS - Address 0x8fbc62c4 base at 0x8fbc0000 DateStamp 0x49e01fcf 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x00000063, 0x0000001b, 0x00000001, 0x82ec15ce) *** ntkrnlpa.exe - Address 0x82e67fd9 base at 0x82e1a000 DateStamp 0x4cb710d6 三つめ A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: Ntfs.sys NTFS_FILE_SYSTEM If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x00000024 (0x001904aa, 0xbf7b7a18, 0xbf7b7714, 0x82ebe22c) *** Ntfs.sys - Address 0x8b41cfff base at 0x8b403000 DateStamp 0x49e0192a

  • ブルー画面エラー

    このような画面がでてしまいました。 どうすればよいのでしょうか。 よろしくお願いします。 a problem has been detected and windows has been shut down to prevent damage to your computer. page_fault_nonpaged_area if this is the first time you've seen this stop error screen, restart your computer. if this screen appears again, follow these steps: check to make shre any new hardware or software is properly installed. if this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. if problems continue, disable or remove any newly installed hardware or software. disable bios memory options such as caching or shadowing. if you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select safe mode. technical information: stop: 0x00000050 (0xE14D4810,0x00000000,0x8055259a,0x00000001) Beginning dump of physical memory dumping physical memory to disk: 24

注目のQ&A

カテゴリ

専門家に質問してみよう

職業から探して質問する

あなたにピッタリな商品が見つかる！ OKWAVEセレクト

質問する