• ベストアンサー

シャットダウン時

こんにちは。 さっそく質問ですが、シャットダウンした時に A problem has been detected and windows has been shut down to prevent amage to your computer. iRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed hardware or software. isable BIOS memory options such as caching or shadowing. If you need to use safe Mode to remove or disable conponents, restart your computer, press F8 to select Advanced Startup Options, and then selecct Safe Mode. とでてき、終了できなくなるのですが、どう対処すればよいでしょうか? よろしくお願いします。

質問者が選んだベストアンサー

  • ベストアンサー
  • goold-man
  • ベストアンサー率37% (8365/22183)
回答No.1

>終了できなくなる 電源ボタンを長押し(4秒位)強制終了し、2分程度経過後、セーフモード(電源入れロゴが出たらF8を軽くトントン叩きセーフモードなどのメニューで「前回正常時の構成」を選び起動)してみます。 その後調子が悪い場合、「スタート」「すべてのプログラム」「アクセサリ」「システムツール」「システムの復元」で正常だった日に戻します(効果がない場合は「システムの復元」の取消しもできます) 「システムの復元」を下場合、復元ポイント以降にインストールしたソフトはありませんから再度インストールします。

conduce
質問者

お礼

ためしてみます。 ありがとうございました!

その他の回答 (2)

  • violet430
  • ベストアンサー率36% (27472/75001)
回答No.3

データをバックアップしてOSを再インストールして下さい。

conduce
質問者

お礼

やはりそれが一番なのでしょうか? 回答ありがとうございました!

回答No.2

ご参考ください。

参考URL:
http://oshiete1.goo.ne.jp/qa2620146.html
conduce
質問者

お礼

参考にしてみます。 ありがとうございます。

関連するQ&A

  • シャットダウン時に青画面+英文

    買って半年も経っていないノートパソコンなのですが、昨日シャットダウンしようとしたところ、なかなかシャットダウンされず私はそのまま寝てしまいました。ところが今日の朝起きてみると、青画面に大量の英文が映し出されていて、とても慌てました。画面には A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen restart your computer. If this screen appears again,follow these steps. Check to make sure any new hardware or software is properly installed.If this is anew installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadwing. If you need to use safe mode to remove or disable computers,restart your computer,press F8 to select Advanced startup options,and then selest safe mode. と表示されていました。 機械的な面にはあまり詳しくないので、どうしてよいかわからず、とても困っています。よろしくお願いします。

  • STOPエラーでシャットダウンできません。

    よろしくお願いします タイトルの通りです。 エラー文は下記に書きます。 A problem has been detected and windows has been shut down to prevent damage to your computer. IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this Stop error screen, restart your computer . If this screen appears again, follow for any Windows updates you might need. If problems continue, disable or remove any newiy installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe mode. Technical infomation: *** STOP: 0X0000000A(0X000000B0,0X00000002,0X00000000,0X80509FAC)

  • シャットダウンを押すとしばらくしたらブルー画面。

    シャットダウン押す→シャットダウンしています→ブルースクリーン そのため シャットダウンが強制しかできません(設定が消えてる・・・) 書きました。 a problem has been detected and windows has been shut down to prevent damage to your computer ati2dvag.dll TERMINAL_SERVER_DRIVER_MADE_INCORRECT_MEMORY_REFERENCE if this is the first time you ve seen this stop error screen, restart your computer. if this screen appears again. follow this steps:check to make sure any new hardware or software is pro pely installed. if this is a new installation,ask your hardware or software manfacturer for any windows updates you might need. if problems continue, disable or remove any newry installed hardware of software disable bios memory options such as caching or shadowing,if you need to use safe mode to remove or disblecomponents restart your computer. press f8 select advance startup options and then select safe mode technical infomation: stop 0x000000cf(0x9911f9cc,0x0000000,0x9911f9cc,0x00000000) ati2dvag.dll -address 991f9cc base at 99100000, datestamp 00000000 です。そのati2dvagを削除すれば解決しますが256色800×600になってしまいます・・・どうしたら解決しますか?

  • 立ち上がらなくてこまっています!

    昨日、テフラグをして無事に完了し、 普通に閉じたのですが、 今朝立ち上げたら、このようなメッセージが出て 立ち上がらなくなってしまいました。 どうすればいいかわかりません。 助けてください。 A problem has been detected and windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: If this is the first time you`re seen this stop error screen,restart your computer.If this screen appears again, follow these steps: Check to make sure any new hardware or software is proprerly installed. If this is new installation. Ask your hardware or software manufacturer for any windows updates you might need. If problem cotinue,disable or remove any newly installed hardware or software.Disable BIOS memory options such as caching or shadowing.If you need to use Safe Mode to remove or disable components,restart your computer,press F8 to select Advanced Startup Options,and then select safe Mode. Technical information: ***STOP: Ox40000080(Ox815afafo,Ox8143004,Ox00000000,Ox00000001) パソコンにあまり詳しくないので、 詳しく教えてください。

  • シャットダウンできずに再起動してしまう

    osはwinxpのhomeを使用しております。 ある日、突然にシャットダウンできずに再起動してしまうようになりました。 以下のサイトの『解決方法』を試したら http://support.microsoft.com/kb/320299/ 下記のブルースクリーンエラーがでましたが意味がわかりません。 A problem has been detected and windows has been shut down to prevent damage to your computer. PAGE_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer. if this screen appears again,follow these steps: Check to make sure any new hardware or software is properly installed. if this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. if problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. if you need to use safe mode to remove or disable components,restart your computer,press F8 to select advanced startup options, and then select safe mode. Techhical information:   STOP:0×00000050(0×913BB4BC,0×00000000,0×805702A2,0×00000000) Beginning dump of physical memory Physical memory dump complete. contact your system administrator or technical suppory group for further assistance. 以前のように正常にシャットダウンできるようにするには どうしたらよいのでしょうか? わかる方がいらっしゃいましたら、よろしくお願い致します。

  • エラー画面の対処法

    pcを起動すると、最終的には次のエラー画面が出て起動できません。 a problem has been detected and windows has been shut down to prevent damage to your computer. Unmountable_boot_volume If this is the first time you’ve seen this stop error screen, Restart your computer. If this screen appears again, follow these steps; Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. 新しいインストールとかはしてないんですが、確認する方法とか取り除き方がわかりません…。 BIOS memoryを無効にするやり方がわかりません…。 最後のセーフモードは試しましたが効果なしです。 どなたか教えてください。

  • PCが立ち上がらなくなってしまい、困っています2

    先日ブルースクリーン?で困って質問した者です。 英字の内容を書きます。この場合、直るでしょうか? A problem has been detected and windows has been shut down to provent damage to your computer. UNMOUNTABLE_BOOT_VOLME If this is the first time you've seen this stop errer screen, restart your computer.If this screen appears again,follw these steps:check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows up dates you might need. If problems continue,disable or remove any newly installed hardware or software.Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components,restart your computer,press F8 to select Adovanced start up options,and ther select safe mode. Technical information:STOP:0x000000ED(0x865C5C08,0x0000006,0x00000000,0x00000000)

  • ウィンドウズが、何もせずに突然再起動してしまいます。

    つい最近から、ウィンドウズが突然再起動されるようになってしまって、システムの復元をしたのですが、それでも直りません。 再起動をしないように設定したら、青い画面でメッセージが出てきました。(下の英文全てです。) 現状では、いつエラー画面が出るか、ヒヤヒヤしています。 この画面は、何を意味しているのでしょうか、また、可能ならばその解決策を教えていただけると大変助かります。 A problem has been derected and windows has been shut down to prevent damage to your computer. PAGE_FAULT_IN_NONPAGED_AREA If this is the first time you've seen this stop error screen,restart your conputer. If this screen appers again,followthese steps: If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable conponents,restart your computer,press F8 to select Advanced Startup Options,and then select Safe Mode. Technical information:

  • BIOSを元にもどす方法

    現在、DELLのInspiron530を使っているのですが、 BIOSのバージョンを1.00から1.05にバージョンアップしたら、 パソコンをスリープ状態から起動するたびにBlueScreenになり、  A problem has been detected and windows has been shut down to prevent damage to your computer.   BAD_POOL_CALLER  If this is the first time you've seen this stop error screen,restart your computer.If this screen appears again,follow these steps:  Check to make sure any new hardware,or software is properly installed.   If this is a new installation, ask your hardware or software, manufacturer for any windows updates you might need.  If problems continu,disable or remove any newly installed hardware or software.  If problems continue, disable or remove any newly installed hardware or software.  Disable BIOS memory options such as caching or shadowing.  If you need to use safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select safe mode. (以下略) という表示が出て、強制再起動になる、という症状が出るようになってしまいました。 できれば以前のバージョンにもどしたいのですが、どうやれば戻すことができるのかわかりませんでした。 だれかわかる人いたら教えてください(>_<)

  • windows xpに関して質問です。

    windows xpに関して質問です。 起動中に、パソコンがジーっと音をたて、突然フリーズしバックがブルーの画面になります。 そこに以下の様な文章が書かれています。 A problem has been detected and windows has been shut down to prevent damage to your computer. KERNEL_STACK_INPAGE_ERROR If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again,follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe Mode to remove or disable components, restart your computer,press F8 to select Advanced Startup options, and then select safe memory. 文章は以上です。 何か設定で改善出来るのでしょうか?