• ベストアンサー
※ ChatGPTを利用し、要約された質問です（原文：青い画面になってしまう現象）

青い画面になってしまう現象

hulun001の回答

  • ベストアンサー
  • hulun001
  • ベストアンサー率49% (124/252)
回答No.1

こんにちは。 　このまま翻訳サイトで翻訳したものを貼り付けます。 Aproblem nasは見つけられたおよびウインドウnasでyoorコンピュータにdawageを防ぐために隔離する 最初があなたの時間を計ってこれならば見られるveが、あなたのコンピュータもしもが再びこんなにscreetに、これらのstpepsに続くようであるエラースクリーンリスタートをこんなに止めます 新しいnardwareまたはsoftareがこれが新しいインストールであるならば、装置されてきちんとある何でもどんなウインドウのためのあなたのハードウェアでもあなたを更新することを尋ねることを確認することが必要をmigntすることを確認してください 身体的な記憶dumpcompleteのダンプが更なる援助のためにあなたのシステム管理者または技術的な支援グループに連絡すると切り出すこと http://translation.infoseek.co.jp/ で翻訳しました。 青い画面が出る前にしたソフトの削除をお奨めします。 前のソフトがwindowsUPdateの時もあります。 このときは目的のUPdeteを手動で入れるか、 競合しているソフトを入れなおしてください。

ariassx
質問者

お礼

回答ありがとうございます。 なるほど、ソフトが原因でしたか、やってみますね。 回答ありがとうございました。

この回答がついた質問に戻る
  1. カテゴリ
  2. 趣味・娯楽・エンターテイメント
  3. その他（趣味・娯楽・エンターテイメント）

関連するQ&A

  • ブルースクリーン現象になりました

    質問をさしてもらい ブルースクリーン現象ということが分かり (対処の仕方がわかりません) BlueScreenView を使い　(何個かありましたが数が多かったので何個かはりました) ブルースクリーンのところを抜き出してみました ハードディスクのバックアップはとらなくても大丈夫でしょうか A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x9589a9b8, 0x00000002, 0x00000000, 0x82ebb60b) *** ntkrnlpa.exe - Address 0x82e4ffd9 base at 0x82e02000 DateStamp 0x4cb710d6 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x00000000, 0x0000001b, 0x00000000, 0x82e95c94) *** ntkrnlpa.exe - Address 0x82e9bfd9 base at 0x82e4e000 DateStamp 0x4cb710d6 三つめ A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe CACHE_MANAGER If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information:

  • 急に画面が切り替わって止まってしまいます

    a problem has detected and windows has been shut down to prevent damage to your computer. if this is the first time you have seen this stop error screen,restart your computer. If this screen appears again,follow these steps. Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continus, disables or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer , press F8 to select Advanced Stertup Options, and then select safemode. technical information. Begining dump of physical memory. この画面に急に切り替わって動かなくなります 一体どうすればいいんでしょうか<(_ _)>

  • 突然青いエラー画面になります

    以下画面に表示されてる文章です a probiem has been detected and windous has been shot down to prevent damage to your computer driver＿irql＿not＿less＿or＿equal if this is the first time you've seen this stop erro screen restart your computer. ifthis screen appears again follow these steps. check to mak sure any new hard ware or software is properly installed. if this isa new installation, manufacturer for any windous updates you might need. if problems continue, clisable or remove any newly installed hardware or softnare.disable blos memory options such as caching or shadowing. if you need to use safe mode to remove or disable components,restart your computer,press F8 to select safe mode. technical information; この中に原因が書かれているんでしょうか？ 解る方教えてください この画面表示中にＦ８ボタンを押してもなにもなりませんでした 謎の英数字があと４行ほどあります、必要なら記載します

  • パソコンで青い画面

    パソコンで青い画面になってしまい。次のようなメッセージです どこがおかしいのか さっぱりわかりません。ご指導宜しくお願いします。 初心者ですので 可能な限り手順も教えてください。 A problemhas been detectedand windows has been shut down to prevent dama to your computer. MACHINE_CHECK_EXCEPION if this is the first time you've seen this stop error screen. restart your computer. If this screen appears again,follow these steps: check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware of software.Disable BIOS memore options such as caching or shadowing If you need to use safe mode to remove or disable components restart select safe mode. Technical information *** STOP:0x0000009C(0X00000004,0X80548EF0,0x82000000,0X00070F0F) Beginning dump of physical memory

  • ノートパソコンが突然に訳のわからない画面になって困っています。

    昨日、ネットを閲覧しているときにフリーズしてしまい強制終了もできなくて電源を落としました。その後、今まで見たことのない画面（英語）でどうする事のできなくなりました。 画面を自分で書き写し別のパソコンで翻訳しましたが、意味がわかりません。どうしたらよいのでしょうか？よろしくお願いいたします。 東芝・ダイナブックCX1/212CMEW windows XP 私の転記ミスがあるかと思いますが以下の文です。 a problem has been detected and windows has been shut down to prevent damage to your computer.KERNEL_DATA_INPAGE_ERROR if this is the first time you've seen this stop error screeen,restart your computer. if this screen appears again ,follow these steps:check to make sure any new hardware or software is properly installed. if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need.if problems continue,disable or remove any newly installed hardware or software.disable BIOS memory options such as caching or shdowing.if you need to use safe mode to remove or disable components,restart your computer,press F8 to select advanced startup options,and then select safe mode. beginning dump of physical memory .physical memory dump complete.contact your system administrator or technical support group for further assistance.

  • シャットダウン時に青画面＋英文

    買って半年も経っていないノートパソコンなのですが、昨日シャットダウンしようとしたところ、なかなかシャットダウンされず私はそのまま寝てしまいました。ところが今日の朝起きてみると、青画面に大量の英文が映し出されていて、とても慌てました。画面には A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen restart your computer. If this screen appears again,follow these steps. Check to make sure any new hardware or software is properly installed.If this is anew installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadwing. If you need to use safe mode to remove or disable computers,restart your computer,press F8 to select Advanced startup options,and then selest safe mode. と表示されていました。 機械的な面にはあまり詳しくないので、どうしてよいかわからず、とても困っています。よろしくお願いします。

  • ブルー画面から進みません

    ブルー画面で下のエラーがでます。 F8を押しながら電源を入れてセーフモードにしても、 また同じブルー画面で同じエラーが出てしまいます。 解決法を教えてください。 よろしくお願いします。 A probem has been detected and windows has been shut down to prevent damege to your computer. UNMOUNTABLE_BOOT_VOLUME If this is the first time you've seen this stop error screen, restart your computer.If this screen appears again, follow these steps: check to make sure any new hardware of software is proberly installed. If this is a new installation, ask your hardware or sortware manufacturer for any windows update you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select safe mode. Technical information: *** STOP: 0x000000ED (0x817A4BB8, 0xC0000032, 0x00000000, 0x00000000)

  • エラー画面の対処法

    pcを起動すると、最終的には次のエラー画面が出て起動できません。 a problem has been detected and windows has been shut down to prevent damage to your computer. Unmountable_boot_volume If this is the first time you’ve seen this stop error screen, Restart your computer. If this screen appears again, follow these steps; Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. 新しいインストールとかはしてないんですが、確認する方法とか取り除き方がわかりません…。 BIOS memoryを無効にするやり方がわかりません…。 最後のセーフモードは試しましたが効果なしです。 どなたか教えてください。

  • ブルースクリーン現象になりました　

    前 質問をさしてもらい ブルースクリーン現象ということが分かり (対処の仕方がわかりません) BlueScreenView を使い　(何個かありましたが数が多かったので　最近の奴を何個かはりました) ブルースクリーンのところを抜き出してみました A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe KERNEL_MODE_EXCEPTION_NOT_HANDLED If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x1000008e (0xc0000005, 0x82fac7ef, 0xb0bfa5a0, 0x00000000) *** ntkrnlpa.exe - Address 0x82fac7ef base at 0x82e51000 DateStamp 0x4cb710d6 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe BAD_POOL_HEADER If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x00000019 (0x00000022, 0x10000000, 0x00000000, 0x00000000) *** ntkrnlpa.exe - Address 0x82f18b3f base at 0x82e4b000 DateStamp 0x4cb710d6 三つめ A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe ATTEMPTED_WRITE_TO_READONLY_MEMORY If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x000000be (0x966e7084, 0x8a618101, 0x8bf67ac4, 0x0000000a) *** ntkrnlpa.exe - Address 0x82ed1379 base at 0x82e39000 DateStamp 0x4cb710d6

  • 起動しようとすると、青い画面に英語でズラ～っと文字が出てきて止まってしまいます

    DELLのINSPIRONというノートPCを使っています。 ２～３日前から、起動しようとすると青い画面になり英語でずら～っと文字が出てきたきり、止まってしまいます。 何度試しても同じで全く使えません。どうしたら良いでしょうか・・。 出てくる英語の文字は A problem has been detected and windows has been shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME If this is the first time you've seen this stop error screen. restart your computer.If this screen appears again,follw these steps: Check to make sure any new hardware or software is properly installed.If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select safe mode. Technical information: STOP: 0×000000ED(0×8571B5F0,0×C0000006,0×00000000,0×00000000) と、出ています。長々とすみません・・。やっぱり故障でしょうか・・。困っています。

注目のQ&A

カテゴリ

専門家に質問してみよう

職業から探して質問する
質問する