• ベストアンサー

PC届いたのに、モニタをグラフィックカードへ接続がわかりません。

新品DELLパソコンを店頭担当者に構成見てもらい購入商品届き、喜んでケーブルを差込電源ON♪しかし…立ち上がってすぐに…次のメッセージで、動きが止まってしまいます。店頭で本体にはビデオカードが有りますが、このモニタ側にはDVI端子を搭載してないのでデジタル接続は出来ないとは聞いています。どうしたら良いか、教えてください。 Attention:Unsuppported Video Configuration Detected Action is Bequired This is computer has add-in graphics card,but the monitor cable is plugged to attach the monitor cable to add-in graphics card: 1.Shut down the computer 2.Plug the monitor cable into the add-in graphics card connector.This may requir a or video adaputer cable. (provided with the system) 3.Turn on the computer.

質問者が選んだベストアンサー

  • ベストアンサー
noname#23300
noname#23300
回答No.5

写真で見る「デル Dimension C521/E521」~デル初のAMD搭載PCの中身 http://pc.watch.impress.co.jp/docs/2006/1012/dell.htm DVI-I(白いコネクターが2つついているもの) ミニD-Sub15ピン(青いコネクターが2つついているもの) http://pc.watch.impress.co.jp/docs/2006/1012/dell_16.jpg どちらかのケーブルの黒い方を下部にある白いコネクターに差し込み 白い(青い)コネクターとモニターを接続する。 http://pc.watch.impress.co.jp/docs/2006/1012/dell_05.jpg htE177FP http://www1.jp.dell.com/content/topics/segtopic.aspx/pressoffice/2006/060710?c=jp&l=ja&s=corp モニターが青いコネクタ(ミニ D-sub 15-ピン)しかありませんので 青い方の2又を使ってください

1171178
質問者

お礼

有難うございます。画像が見られ、丁寧なわかりやすい解説で、本当に助かりました。お陰様で問題解決出来、晴れてデスクトップ画面が誕生しました。本当に、本当に感謝しています。又何かわからない時は、良かったら教えて下さい。

その他の回答 (4)

  • saltmax
  • ベストアンサー率39% (2997/7598)
回答No.4

コンピュータは このコンピュータには追加でグラフィックカードがついているのに 追加されたグラフィックカードにモニターケーブルが接続されていない。 と言ってます。 二股に分かれたケーブルの元側をグラフィックカードに接続し 二股に分かれた内の1つのコネクタにモニターケーブルを接続するのではないでしょうか。 二股に分かれた方のコネクタには1と2と番号がついていると思います。 1に接続してください。

1171178
質問者

お礼

ありがとうございます。二股に分かれた方のコネクタには1と2と番号がついていました(嬉)頑張ってやってみます。番号も見て何だろう?と不安でした。感謝です。重ねて有難うございます。

回答No.3

DVI-I to ミニDサブ15ピンアダプタが同梱されていませんか? なければ買いましょう

1171178
質問者

お礼

早速のご回答有難うございます。すみません、DVI-I to ミニDサブ15ピンアダプタって何かわからないもので…申し訳有りません…。 ただ、同梱されている物で長さ15cmと短い2種類のケーブル(両方ともパラレル)が余りました。どちらも、、頭が1つで2本に分かれていますが、内1本は2本に分かれた先の差込口幅1.5cmの物で、他の差口は全て幅1.5cmの物です。一応、すぐ使える様、ショップの担当者にカスタマイズして貰ったので、私の接続がいけない気がしてます。 すぐお返事頂けた事、ここを初めて利用したので、感動しました。有難うございました。

  • BMW8
  • ベストアンサー率31% (301/958)
回答No.2

グラボの接続不良のようなカンジですね。 一度抜き取ってさしなおししてはいかがでしょう。 その他に考えられるのはグラボに別途電源供給をしなければならないのに、それをさし忘れていたり。 >このモニタ側にはDVI端子を搭載してないのでデジタル接続は出来ないとは聞いています これはグラボ動作に関係はありません。

1171178
質問者

お礼

早速のご回答有難うございます。モニタケーブルは一度抜き取ってさしなおししてみました。すみません、クラボって何かわからないもので…申し訳有りません…。 ただ、同梱されている物で長さ15cmと短い2種類のケーブル(両方ともパラレル)が余りました。どちらも、、頭が1つで2本に分かれていますが、内1本は2本に分かれた先の差込口幅1.5cmの物で、他の差口は全て幅1.5cmの物です。一応、すぐ使える様、ショップの担当者にカスタマイズして貰ったので、私の接続がいけない気がしてます。 すぐお返事頂けた事、ここを初めて利用したので、感動しました。有難うございました。

  • ZENO888
  • ベストアンサー率49% (8944/18242)
回答No.1

このPCにはオプションのビデオカードが追加されてます。 でも、モニターケーブルはオンボード側のビデオコネクターに繋がってます。 ビデオカード側のコネクタに繋ぎ直して下さい。 って事です。 >このモニタ側にはDVI端子を搭載してないのでデジタル接続は出来ないとは聞いています モニターのメーカー名と型番は? 又、PC側の機種と仕様は? アナログRGBで接続すればいいのでは?

1171178
質問者

お礼

本当にすぐに、ご回答頂けて、感動と感謝しています。実は、初めてここを利用し初質問、初回答頂きました。英語も訳して頂き助かります。メーカー名は全てDELLです。PCはDimension C521で、モニタはE177FPで、現在確認をした事としては、本体ランプ表示は電源緑で常時表示、123が緑で常時表示している事です。(外付け増設機器)無(内部増設機器)無(自身でインストールしたアプリケーション)無 な状況で、但し、長さ15cmと短い同梱パラレルケーブルが2本余っています。13メディア対応カードリーダー/ライターをカスタマイズしたので、それに関するケーブルかもしれませんが、両方とも頭が1つで2本に差込口が分かれています。内1本は、分かれた2本の方の差込口(合計2つ)が幅1.5cm位で、残りの差込口(合計4つ)は幅2cm位の差込口です。購入時は、すぐ使える様、店員さんにカスタマイズ見て貰っているので、きっと私の接続がいけないのだと思います。本体ビデオカード側のコネクタがどれかが分からない(本体で余っているパラレル差込口は幅2cmの1箇所のみ)のと、幅2cmに合う同梱パラレルケーブルが余っていますが、長さが15cmで届きません。現在接続しているモニタのパラレルケーブル差込口のパラレル差込口は幅1.5cmで、モニタと本体を繋ぐには長さも充分です。もしわかれば、どうぞ教えてくださいませ。

関連するQ&A

  • グラフィックカードの取り付け後の起動トラブル

    使用PC:DELL/Dimension 5150c(スリムPC) 取り付けたいグラボ:GALAXY/7300GT-LP(D-SUB、DVI端子) グラフィックカードの取り付けに初めて挑戦したのですが PCI Express×16に取り付けてグラボについてるD-SUB端子と モニター接続したら画面が写りません。 グラボのファンは回っています。 一旦、電源を切りパソコン本体のD-subとモニター接続したら ファンは回りだし、こんな画面が出ました system halted! Attention: Unsupported Video Configuration Detected Action is Required This computer has an add-in graphics card, but the monitor cable is plugged into the integrated video connector. To attach the monitor cable to the add-in graphics card 1. shutdown the computer 2.plug the monitor cable into the add-in graphics card connect. This may require a video adapter or Video adapter cable. (Provided with the system) 3.Turn on The computer. this message should not after completing these steps. For more information or help, please Refter system documentation >This computer has an add-in graphics card, but the monitor cable is plugged into the integrated video connector. To attach the monitor cable to the add-in graphics card って検索したら、モニターケーブルを差す場所が違うよって メッセージで変換コネクタを使えば解決するそうなのですが、 何の変換コネクターを使えばいいのでしょうか?

  • PCを立ち上げるとモニタにエラーが出る

    買ったばかりの新しいPCを今まで使えていたモニターに接続すると 以下のメッセージが最初に出てきてそれ以上先に進めません。 パソコンはDELL社のDimension C521 AMD Athlon(TM) モニタはノーブランドのCRTです。 パソコン側の差込口がMiniDsub15ピンでモニタのケーブルも同じ 形状です。モニタはさっきまで古いPCで問題なく使えていました。 エラーメッセージは以下のとおりです。 よろしくお願いします。 Unsupported Video Configuration Detected This computer has an add-in graphics card , but the monitor cable is plugged into the integrated video connector. To attach the monitor cable to the add-in graphics card, play the monitor cable into the add-in graphics card connector. This may require video adapter or video adapter cable.

  • グラフィックカードが原因でしょうか?

    PCの電源をオンしても、モニターが真っ黒なままなんです。 しかし、ハードディスクは動いている様子です。 診断ライトは1・2・3が点灯しており、4は点灯していません。 ためしに、アナログの方でモニターに接続したら、デルの画面が出た後、下記の表示が出てきます。 Attention:Unsupported Video Configuration Detected Action is Requird This computer has an add-in guraphics card,but the monitor cable is plugged into the integrated video connector. To attach the monitor cable to the add-in graphics card: プラグはちゃんと繋がれているようなので、グラフィックカードの故障が、画面が真っ黒な原因なのでしょうか? 因みに、使用しているPCはDellのDimension C521でVistaのモデルです。 よろしくお願いします。

  • 起動すると・・・

    先日パソコンを譲り受け、自宅でマウスやキーボード等の配線を繋ぎ起動したところ System halted! Floppy diskette seek failure Attention:Unsupported Video Configuration Detected Action is Required This computer has an add-in graphics card, but the monitor cable is plugged into the integrated video connector. To attach the monitor cable to the add-in graphics card: 1.Shut down the computer 2.Plug the monitor cable into the add-in graphics card connector. This may require a video adapter or video adapter cable. (provided with the system) 3.Turn on the computer. This message should not appear after completing these steps. For more information or help,please refer to the system documentation. このようなメッセージが表示され、画面は止まったままでした。 これはどうしたら良いのでしょうか。 OSはインストール済です。よろしくお願いいたします。

  • 毎回英語の画面が出て困っています

    毎回起動するたびに英語が書いてある画面が出て困ってます。 F1を押すと普通に起動するので使えるのですが、この画面の意味がわからないので教えてください Attention: Unsupported Video Configuration Detected Action is Required This computer has an add-in graphics card, but the monitor cable is plugged into the integrated video connector. To attach the monitor cable to the add-in graphics card: 1. Shut down the computer. 2. Plug the monitor cable into the add-in graphics card connector. This may require a video adapter or video adapter cable.(provided with the system) 3. Turn on the computer. This message should not appear after completing these steps. For more information or help, please refer to the system docmentation.

  • HDMIでPCとTVを接続(グラフィックボードが認識できてない??)

    HDMIでPCとTVを接続するために購入しました。(ゲーム用ではありません) PCを起動して最初の画面に下記の文字が映ります。 Attention Unsupported Video Configuration Detected. Action is required this Compter has an add-in graphics card , but the moniter cable is plugged into the integrated video connector. To attach the mointor cable to the add-in graphics card 1 Shut down the Computer 2 Plug the monitor cable into the add-in graphics card connector. This may require a video adapter or video adapter cable. (Provided with the system) 3 Turn on the Computer This massage should not appear after completing these steps. For more information or help , Please refer to the system documentation. 小生の環境 PC:DELL inspiron 530s OS:Vista Home Edition CPU:Core2duo メモリ:2G TV:東芝REGZA42Z8000 追加グラフィックボード:GT9400 GV-94--N94T-512I 現在の接続状況 TV---PC---モニタ  ↑   ↑   HDMI  D-SUB F1を押すとそのままPCの画面は映りますが TVは映りません。コンパネより、画面の設定を確認しましたが、 TV(HDMIポート)は認識していないようで、 選択できるモニタは1つだけです。 電源出力・相性も購入先の方も「大丈夫」との太鼓判を押していただいていたのですが、 不安になってきました。 日中は仕事のため、外出先からサポートデスクにtelしても、 手元に自分のPCがない為、 手ごたえを感じられません。 どなたか、アドバイスの程よろしくお願いいたします。

  • グラフィックカードを認識しなくて、困っています。

    グラフィックカードを認識しなくて困っています。 購入したパソコンはDELL製で Inspiron 530 プレミアムパッケージ Windows Vista(R) Ultimate 32ヒ゛ット CPU Core(TM) 2 Duo フ゜ロセッサー E6750 (4MB L2 キャッシュ、2.66GHz、1333MHz FSB) メモリ 2GB(1GB x2) デュアルチャネル DDR2-SDRAM ビデオカード NVIDIA(R)GeForce(R) 8600 GT 256MB (DVIx2/TV-out付) ハードディスク 320GB SATA 3.0Gb/s NCQ HDD PC起動時に以下のような注意書きがでます。 Attention: Unsupported video configuration Detected Action is Required. This computer has an add-in graphics card. but the moniter cable is plugged into the integrated video connector. To attach the moniter cable to the add-in graphics card. Plug the moniter cable into the add-in graphics card connector. This way require a video adapter or video adapter cable. どうか御教授願います。

  • DELLの表示後エラー表示で起動しません

    Dimension C521 購入後、最初に電源ボタンを入れDELLの表示が出た後いきなり Attention Unsupported Video Configuration Detectedと表示、 This computer has an add-in graphics card, but the monitor cable is plugged into the integrated video connector. To attach the monitor cable to the add-in graphics card と表示。 BENQのモニターでは、上記の表示がされましたが、テレビで接続しなおして見たら、まったく画面表示すらできませんでした。 何がおかしいのかまったくわからない初心者です。 どなたか、詳しい方おられましたら教えていただければ助かります。

  • 昨日からPCを起動させる度に英語の変な画面

    昨日からPCを起動させる度に英語の変な画面(添付画像)が出るようになってしまったのですが、何なんでしょうか? 一応「F1」キーを押せば普通に戻るのですが、いちいち面倒なのでこの画面が出ないようにしたいのですが、ご存知の方はいらっしゃいますでしょうか? OSはビスタです。 画面をデジカメで撮影した際、右側が見切れてしまったので一部不明な所もありますが、 わかる範囲で文字にしてみました。 his computer has an add-in graphics card, but the monitor cable is nto attach the monitor cable to the add-in graphics card: ・Shut down the computer ・Plug the monitor cable into the add-in graphics card computer This mey require a video adapter or video adapter cable ・Turn on the computer. his message should not appear after completing these steps. or more information or help, please refer to the system documentation. ress F1 to continue, F2 to enter SETUP …です。

  • DELL Dimension 4700C

    DELL Dimension 4700Cを買ったのですが モニターを接続するとエラー?がでます どうしたら直りますか? このような文字がでてきます。 All Rights Reserved Dell System Dimension 4700c Series BIOS version A03 www.dell.com Keyboard failure Attention: Unsupported Video Configuration Detected Action is Required This computer has an add-in graphics card, but the monitor cable is plugged into the integrated video connector. To attach the monitor cable to the add-in graphics card: 1. Shut down the computer 2. Plug the monitor cable into the add-in graphics card connector. This may require a video adapter or video adapter cable. (provided with the system) 3. Turn on the computer. This message should not appear after completing these steps. For more information or help, please refer to the system documentation. System halted! どうすればいいでしょうか? お願いします