• ベストアンサー

700mのドライバのインストール後にエラー ブルースクリーンになる

5年ぶりにノートPC購入したので今まで使っていたDELL Inspiron700mを家族に譲るのためにWinXPHomeを再インストールしました。 700mの再インストールは初めてです。 サポートページ見ながらOSの再インストールは完了したのですが ドライバでトラブってます。 http://support2.jp.dell.com/jp/jp/faq/201978.asp の手順通りにドライバのインストールするのですが Intel (R) Pro/Wireless 2200BG Network Connection  をインストールして再起動すると起動できずに a problem has been detected and windows has been shut down to prevent damege to your computer. IRQL_NOT_LESS_OR_EQUAL if this is the first time you've seen this stop error screen, restart your computer .if this screen appers again,follow these steps: check to make sure any new hardware or software is properly installed. if this is a new installaction,ask your hardware or software manufavture for any windows updates you might need. if problems continue,disable or remove any newly installed hardware or software.disable BIOS memory options such as cahing or shadowing. if you need to use safe mode to remove or disable components,restart your computer,perss F8to select advanced startup options,and then select safe mode. Technical information: STOP :0x0000000A (0x017F0304,0X00000002,0x00000000,0x804DBF68) beginning dump of physical memory physical memory dump complete. とブルースクリーンになってしまいます。↑誤字あったらすみません。 セーフモードで起動してドライバのアンインストールして再起動しても 起動後に『深刻なエラーから回復、マイクロソフトにエラー報告送信』のメッセージ表示後に同じエラーでブルースクリーンになってしまいます。もう一度リカバリーやり直したのですが同じところでエラーになります。 購入時は4年サポートに入っていたのですが 延長しなかったのでもうサポートは切れています。 どなたか解決のヒントいただけないでしょうか、お願いします。

質問者が選んだベストアンサー

  • ベストアンサー
  • POWERVAULT
  • ベストアンサー率39% (573/1467)
回答No.1

実際に壊れてるんじゃなければ、もう一度再インストールを最初からやり直してみるしか無い様に思えます。 それで2200BG以外を入れた時点では問題なくて、最後に2200BGドライバ入れてこけるのなら次の手を考える事になりますね。 ところで2200BG搭載に間違いないですか? 本体裏側のWLANの認定シールに2200BGの記載があれば、間違いない事にはなります。

akira0911
質問者

お礼

POWERVAULTさん、ありがとうございます。 もう一度再インストールを行い、2200BGを入れないで続けたところ、問題なく終わりました。 Dell ResourceCDで表示される画面には2200BGの左横にチェックがついています。 また、700mを購入した時の納品書に2200BGの記載があるので間違いないと思います。 (本体裏側の認定シールですが、3枚ある中の右下の細長いシールの左上にWM3A220BGとあるのですが、これでしょうか。) もう一度最後に2200BGを入れたところ、再び同じエラーになりました。 セーフモードで起動してドライバをアンインストールしても同じエラーになるので、 再びセーフモードから、前回正常に起動できたところから再起動させたところ、起動できました。 http://support2.jp.dell.com/jp/jp/faq/201978.asp の説明ページに記載されている内蔵ワイヤレスのドライバですが、 こちらのPCの画面では Intel (R) Pro/Wireless Network Connection (左にチェックなし) Intel (R) Pro/Wireless 2200BG Network Connection (左にチェックあり) と、2つ表示されていて、だめもとでIntel (R) Pro/Wireless Network Connection の方をインストールしたところ、エラーなく終わりました。 また、インストール後にワイヤレスランのネットワークの検出をしています。 これでいいのかとデバイスマネージャーをみたところ、 ネットワークアダプタにはIntel (R) Pro/Wireless 2200BG Network の表示がありました。 うわあ…という感じです。恥ずかしい限りですが、壊れてなくて良かったとほっとしました。 これで甥っ子にPCを譲ることができます、 楽しみにしてくれているので無事に渡せそうで安心しました。 ありがとうございました。

その他の回答 (1)

  • violet430
  • ベストアンサー率36% (27472/75001)
回答No.2

何度再インストールしても同じならDELLのサポートへ相談したらいいです。

akira0911
質問者

お礼

DELLのサポートが切れているのでダメかなと思い、なんとか解決できればとこちらで相談をさせて頂きました。 どうにもならないようでしたら、だめもとでサポートへ相談しようと思います。ありがとうございました。

関連するQ&A

  • ブルースクリーンエラー

    少し前に質問させてもらったのですが、やはりまだ頻繁にでるので質問させてください。 ログをとったので対処法を教えてもらえないでしょうか? よろしくお願いします PAGE_FAULT_IN_NONPAGAED_AREA If this is the first time you're seen this stop error screen,restart your computer,If this screen appears again,fallow these steps: check to make sure any new hardware or software is properly installed. Ifthis is a new istallation,ask yore hardware or software manufacturer for any windows updates you mightneed. If problems continue,disable or remore any newly installed hardware or software,Disable BIOS memory options such as caching or shadowing. If you need touse sofeMode to remove or disable components,restart your computer,press F8 to select Advanced startup options,and then select safeMode. Technical in for mationi *** Stop:0x00000050(0xBAO0154,040000000,0x8058388F,0x00000000)

  • ブルースクリーン

    A problem has been detected and windows has been shut down to prevent damage to your computer. IRQL_NOT_LESS_OR_EQUAL If this the first time you've seen this stop error screen,restart your computer. If this screen appears again,follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe Mode to remove or disable components,restart your computer,press F8 to select Advaned Startup options,and then select safe Mode. Technical information: *** STOP:0X0000000A(0X00000054,0X00000002,0X00000001,0X804DDC8E) Beginning dump of physical memory physical memory dump complete. contact your system administrator or technical support group for further assistance. 起動したときに上記のように書いてありました。 意味がわかりません・・・

  • ブルースクリーンのエラーメッセージに・・・

    印刷をしようとすると下の様なエラーメッセージが出てしまいます。 いろいろ調べてみたのですが解決法がよくわからず困っています・・ どなたかわかる方お願いします。 A problem has been decated and windows has been shut down to prevent damage to your computer. BUGCODE_USB_DRIVER If this is the first time you`ve seen this stop error screen, restart your computer. If this screen appers again, follow these steps: Check to make sure any new hardware or software is propery installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as catching or shadowing. If you need to use safeMode to remove or disable components, restart your computer, press F8 to select Advanced start up options, and then select safeMode. Technical information Stop:0x000000FE(0x00000005,0xFEBC30E0,0x808624C2,0xFEF4D518) Begining dump of physical memory Physical memory dump complete. Contact your system administrator technical support group for further assistance. です。 情報としては ・Windows XP ・印刷時以外は起こらない よろしくお願いします。

  • ブルースクリーンになった

    たびたびブルースクリーンになりますが、 今回は *** STOP: 0x0000001D(0xB64F736A,0xBACD79B4,0x00000000) 前回は A problem has been detected and wiondows has been shut to down to prevent damage to your computer. ORQL-NOT-LESS-OR-EQUAL If this si thefirst time you`ve seen this stop error screen, restart your computer. If this screen again,follow these steps: check to meke sure any new hardware or spftware is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components,restart your computer, press F8 to select advanced startup option, and then select safe mode. Technical information: *** STOP: 0x0000000A (0x00000010,0x00000002,0x00000001,0x8051873C) beginning dump of physical memory physical memory dump complete. Contact your system administrator or technical support group for further assistance. 教えてください、お願いします。

  • ブルースクリーンエラーが出ます。

    ブルースクリーンエラーが出ます。 あるオンラインゲームをプレイしていると突然ブルースクリーンエラーが起こります。 何時間も出ないときもあれば、数分で出るときもあったりします。 全く知識がないためわかる方ご指導お願い致します。 A problem has been detected and windows has been shut down to prevent damage to your computer. The video memory manager has encountered an unexpected fatal error. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again,follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components,restart your computer,press F8 to select Advanced Startup Options,and then select Safe Mode. Technical information: *** STOP: 0x0000010E (0x0000001E,0x00000000,0x00000000,0x00000000) Collecting data for crash dump... Initializing disk for crash dump... Beginning dump of physical memory. Dumping physical memory to disk: 100 Physical memory dump complete. Contact your system admin or technical support group for further assistance. 以上のような文字が出ます。 宜しくお願い致します。

  • ブルースクリーンが起こってしまったのですが

    質問をさしてもらい ブルースクリーンということが分かり (対処の仕方がわかりません) BlueScreenView を使い (何個かありましたが数が多かったので何個かはりました) ブルースクリーンのところを抜き出してみました ハードディスクのバックアップはとらなくても大丈夫でしょうか A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: USBPORT.SYS DRIVER_IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x000000d1 (0x0000008c, 0x00000002, 0x00000000, 0x8fbc62c4) *** USBPORT.SYS - Address 0x8fbc62c4 base at 0x8fbc0000 DateStamp 0x49e01fcf 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x00000063, 0x0000001b, 0x00000001, 0x82ec15ce) *** ntkrnlpa.exe - Address 0x82e67fd9 base at 0x82e1a000 DateStamp 0x4cb710d6 三つめ A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: Ntfs.sys NTFS_FILE_SYSTEM If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x00000024 (0x001904aa, 0xbf7b7a18, 0xbf7b7714, 0x82ebe22c) *** Ntfs.sys - Address 0x8b41cfff base at 0x8b403000 DateStamp 0x49e0192a

  • ブルースクリーンエラー

    OS windows Xp MCE 2005 メモリ 1024MB cpu pen43.2GHz ------------------------------------------------- A problem has been detected and windows has been shut down to prevent damege to your computer DRIVER_IROL_NOT_LESS_OR_EQUAL if this is the first time you've seen this stop error screen. restart your computer. if this screen appears again. follow.these steps: check to make sure any new hardware or software manufacturer for any windows updates you might need. if problems continue. disable or remove anyn newly installed hardware or software.Disable BIOS memory options such as caching or shadowing. if you need to use safe mode to remove or disable components. restart your computer. press F8 to select advanced startup options. and then select safe mode. Technical information: *** STOP: 0x000000D1 (0x206b6450,0x00000002 0x00000000,0xF2A1E490) 下のやつは、表示されるときとされない場合があります。 Beginning dump of physical memory physical memory dump complete. contact your system administrator or technical support group for further assistance. 上記のように表示されます。 ブルースクリーンがでなくて、いきなり止まってしまう場合や、突然再起動されてしまう場合もあります。 原因がわからないので、わかる方よろしくお願いします。

  • ブルースクリーンについて

    質問させていただきます。 alcohol52%をつかってMDSファイルをマウントしたところ、次のようなエラーが起きてしまいました。 A problem has been detected and windows has been shut down to prevent damage to your computer. IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup options, and then select safe made. Technical information: *** STOP: 0x0000000A(0x0000000C,0x00000002,0x00000000,0x804F00B6) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further 自分でもこのエラーについて調べては見たんですが、解決策が見つかりません。 PCはwindowsXPを使っています。 どなたか解決策をお教えいただけたらと思います。 よろしくお願いします。

  • ブルースクリーンが起こってしまったのですが

    質問をさしてもらい ブルースクリーンということが分かり (対処の仕方がわかりません) BlueScreenView を使い (何個かありましたが数が多かったので何個かはりました) ブルースクリーンのところを抜き出してみました ハードディスクのバックアップはとらなくても大丈夫でしょうか (色々と対処をしてもまた別の原因でブルースクリーンが起こってしまった場合はどうすればよいでしょうか) A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: luafv.sys IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x6c006160, 0x0000001b, 0x00000001, 0x82ef55ce) *** luafv.sys - Address 0x91be4036 base at 0x91bdb000 DateStamp 0x47918afb 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: tmcomm.sys PAGE_FAULT_IN_NONPAGED_AREA If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x00000050 (0xd76c5da4, 0x00000000, 0x807c6d5b, 0x00000002) *** tmcomm.sys - Address 0x8f28ce4b base at 0x8f287000 DateStamp 0x49d4727e

  • ブルースクリーンが出てしまいます

    youtubuを利用している時に主になります。 以下がブルースクリーンの内容です。 A problem has been detected and windows has been shut down to prevent damage to your computer. IRQL NOT LESS OR EQUAL If this is the first time you've seen this stop error screen,restart your cmputer. If this screen appears again,follow these steps: Check to make sure any new hardware or software is proqerly installed. If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software.Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components,restart your computer,press F8 to select Advanced Startup Options,and then select Safe Mode. Technical information: STOP: 0x0000000A(0x000000D7,0x00000002,0x00000000,0x804ED977) Beginning dump of physical memory Physical memory dump complete. Contact yor system administrator or technical support group for further assistance. Windows XPを使ってます。 このブルースクリーンが出ないようにするには、どうすればいいのか教えてください。よろしくお願いします。