• 締切済み

起動中にブルーバックから再起動へ(追記)

前質問内容↓ http://oshiete1.goo.ne.jp/qa4403813.html ここのところ順調に作業できていたのですが、今日ついにまたブルーバックになってしまいました…。 そこで、前回答を参考に、エラー画面を携帯で撮影しました。 表示されたエラーメッセージは以下の通りです。 ==ここから== A problem has been detected and windows has been shut down to prevent damage to your computer . DPIVER_TRQL_NOT_LESS_OR_EQUAL If thfs is the first time you've seen this stop error screen, restart your computer. If this screen again, follow these steps: Check to make sure any new hordware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problem continue, dfsable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable computers, restart your computer , press FB to Select Advanced startup options, abd then select safe mode. Technical information: ~~~STOP: 0x000000D1 (0xFDF7A000,0x00000002,0x00000000,0xF88F95CD) ~~~ nnrnstdi,SYS - Address F88F95CD base at F88F8000, DateStamp 46cc8092 Beginning dump of physical memory Physical memory dump complate. Contact your system adminfstrator or technical support group for further assistance. ==ここまで== ビギナーでも直すことができるのか、それとももう死のエラーなのか…、どうかご教授お願いいたしますm(_ _*)m

みんなの回答

  • koketa58
  • ベストアンサー率18% (355/1961)
回答No.2

<直訳>一部修正 問題は見つけられました、そして、ウインドウあなたのコンピュータへの損害を防ぐために隔離します。 DPIVER_TRQL_NOT_LESS_OR_EQUAL あなたがこれがエラースクリーンを停止するのを見たのはこれが初めてであるならば、あなたのコンピュータを再起動してください。このスクリーンならばもう一度、これらのステップに従ってください: 必ずどんな新しいハードウェアまたはソフトウェアでもきちんとインストールされるようにするために、チェックしてください。 これが新しいインストールであるならば、あなたのハードウェアまたはソフトウェア会社にあなたが必要とするかもしれないどんなウインドウ最新版でも求めてください。 問題が続くならば、どんな新しく設置されたハードウェアまたはソフトウェアでも無効にするか、削除してください。BIOS思い出オプション(例えばキャッシングまたはシャドウイング)を無効にしてください。 あなたがセーフモードをコンピュータを取り外すか、無効にするのに用いられる必要があるならば、あなたのコンピュータを再起動して、FBを押しつけますために選択詳細、最初のオプションは、セーフモードを加えて、それから選びます 平たく言うとドライバソフトが変ですと言っています。 疑わしいデバイスドライバを更新ですが、質問者さんの環境が分からないので何を疑ってよいのかもわりません。 それからメモリモジュールが2個以上搭載しているなら代わりベンタンでメモリを1個づつで起動させてみるのもありです。 メモリモジュール不良もしくはメモリスロット不良なんて馬鹿げたトラブルの可能性もあります。 参考URL http://support.microsoft.com/kb/916595/ja http://support.microsoft.com/kb/927015/ja

全文を見る
すると、全ての回答が全文表示されます。
  • alien5
  • ベストアンサー率19% (788/3987)
回答No.1

私の場合はデスクトップですが、マザーボードを交換した直後から、YouTubeからダウンロードした動画をRealPlayerで20分くらい続けて見ていたらブルーバックになり同じような表示が出ました。 条件は違うかもしれませんが、私の場合、2枚のメモリーを一旦抜いて差し込んでいたスロットを入れ替えたら直りました。それ以来ブルーバックは一度も出ていません。 ノートでもメモリーは入ってますよね? 一度抜いて再度差し込んでみたらどうでしょう? ひょっとしたら直るかも。パソコンなんて案外そんなもんです。^^

全文を見る
すると、全ての回答が全文表示されます。

関連するQ&A

  • ブルーバック画面になりました。

    以前こちらで、勝手に再起動します。 との事で質問させていただいた者です。 今部屋に戻ってきたら、パソコン真っ青で私の顔も真っ青になりましたが、そのエラー文で検索かけてもヒットしないのです。 --以下エラー文 A problem has been detected and windows has been shut down to prevent damage to your computer DRIVER_IRQL_NOT_LESS_OR_EQUAL if this is the first time you've seen this stop error screen, ewstart your computer. if this screen appears again, follow these steps: Check to make sure any new hardware or software or software is properly installed. if this is a new installation, ask your hardware or software manufacturar for any windows updates you might need. if problems continue, disable or remobe any newly installed hardwere or software. Disnable BIOS memory options such as caching or shadowing. your computer, press F8 to select advanced startup options, and then select safe mode. Technical information: *** STOP: 0x000000D1 (0x00000030,0x00000006,0x00000000,0xF76811F2) *** viasprid.sys - Address F76811F2 base atF7677000, DateStamp 3fc594a7 Beginning dump of physical memory Physical memory dump complete. Contact your system administarator or technical support group for further assistance. -- タイプミス等があるかも知れませんが回答よろしくお願いいたします。 WinXP-ProSP1

  • 光学ドライブを使うとブルースクリーンに・・・。

    光学ドライブを使おうとすると、ブルースクリーンになってしまうので困っています。 A problem has been detected and windows has been shut down to prevent damage to your computer. Machine check exception. If this is the first time you are seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing. If you need to use safe Mode to remove or disable components, restart your computer, press F8 to select Advanced startup options, and then select safe mode. Technical information. Stop: 0 ×0000009C (0×00000004,0×8054F5F0,0×B2000000,0×00070F0F) Beginning dump of physical memory physical memory dump complete. Contact your system administrator or technical support group for further assistance. この様な、メッセージが出ます。 ウインドウズを時間を空けて起動してもブルースクリーンになってしまいます。 取り敢えず、光学ドライブを使わなければ、ブルースクリーンにならないのですが、何か、対処の方法は、ないでしょうか? ご教示、よろしくお願いします。

  • ブルーバックになり再起動します(長文)

    お世話になります。 一ヶ月前くらいに再インストールしましたが最近ブルーバックになり再起動しますそのときに出るエラーメッセージをがんばって記録しましたが誤字があったらすみません。 よろしくお願いします a problem has been detected and windos has been shut to prevent damage to your computer. if this is the first time youe seen this stop error screen, restart your computer, if this screen appears again,tollow these steps: run a system diagnastic utility supplied by your hardware manufacturer.in particular,run a memory check, and chek for faulty or mismatched memory try changing video adapters, disable or remove any newly installed hardware and drivers disable or remove any newly installed software if you need to use safe mode to remove or disable components restart your computer press f8 to select advaned startup options and them select safe mode technical intormatian stop:0×0000007f (0×00000000,0×00000000,0×00000000,0×00000000,) beginning dump of physical mamory physical memory dump complete contact your system administrator or technical support group for further assistance. 以上のようなメッセージがでて再起動します。 これはどこかシステム的におかしいのでしょうか? それとも再インストールしたら直るものでしょうか? よろしくお願いします。 PC・エプソンのエンデバーMT-6000 OS・XP CPU・セレロン2G メモリー・512M

  • ブルーバックエラーがでます

    下記の通りインターネット中によくブルーバックエラーがでます。 原因は何でしょうか?教えて頂けますでしょうか。 メーカーはFU◎◎TSU WinXPです。 aprobrem has been celected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file rt25000usb.sys pafe_fault_in_nonpaged_area if this is the first time you've seen this stoperror screen, restart your computer if this screen appears again,follow these steps: chek to make sure any new hardware or software or is properly installed, if this is a new installation,ask your hardware or sotware manufacture for windows updates you might need if oribrems bontinue,disable or remove any newly installed hardware or software, disable BIOS memory options such a scaching or shadowing, if you need to use safe mode to remove or disable components, restart your computer,press F8 to select advanced start up options,and thn safe mode technical information: stop:0x00000050(0xFEC38000,0x00000000,0xEEELC36F 0x00000000) rt 2500usb,sys-address EEEIC36F base at EEE0c000,patestamp 40d7963c begginig dump of physical memory physical momory dump complete contact your system administretor or technical sapport group for further assistance ハードウェアのどこかに故障があるようです。 どこ、というところの解読はできません。 safemodeで立ち上げてみる際の手順等を踏んでから 状況を見たほうがいいのでしょうか。 また、safemodeの立ち上げ方を忘れてしまいましたので 修復方法等ご存知でしたらこのあたりも踏まえ教えて頂けたら 幸いです。 宜しくお願いいたします。

  • ブルースクリーンになった

    たびたびブルースクリーンになりますが、 今回は *** STOP: 0x0000001D(0xB64F736A,0xBACD79B4,0x00000000) 前回は A problem has been detected and wiondows has been shut to down to prevent damage to your computer. ORQL-NOT-LESS-OR-EQUAL If this si thefirst time you`ve seen this stop error screen, restart your computer. If this screen again,follow these steps: check to meke sure any new hardware or spftware is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components,restart your computer, press F8 to select advanced startup option, and then select safe mode. Technical information: *** STOP: 0x0000000A (0x00000010,0x00000002,0x00000001,0x8051873C) beginning dump of physical memory physical memory dump complete. Contact your system administrator or technical support group for further assistance. 教えてください、お願いします。

  • ブルースクリーン

    A problem has been detected and windows has been shut down to prevent damage to your computer. IRQL_NOT_LESS_OR_EQUAL If this the first time you've seen this stop error screen,restart your computer. If this screen appears again,follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe Mode to remove or disable components,restart your computer,press F8 to select Advaned Startup options,and then select safe Mode. Technical information: *** STOP:0X0000000A(0X00000054,0X00000002,0X00000001,0X804DDC8E) Beginning dump of physical memory physical memory dump complete. contact your system administrator or technical support group for further assistance. 起動したときに上記のように書いてありました。 意味がわかりません・・・

  • ブルースクリーンについて

    質問させていただきます。 alcohol52%をつかってMDSファイルをマウントしたところ、次のようなエラーが起きてしまいました。 A problem has been detected and windows has been shut down to prevent damage to your computer. IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup options, and then select safe made. Technical information: *** STOP: 0x0000000A(0x0000000C,0x00000002,0x00000000,0x804F00B6) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further 自分でもこのエラーについて調べては見たんですが、解決策が見つかりません。 PCはwindowsXPを使っています。 どなたか解決策をお教えいただけたらと思います。 よろしくお願いします。

  • ブルースクリーンが出てしまいます

    youtubuを利用している時に主になります。 以下がブルースクリーンの内容です。 A problem has been detected and windows has been shut down to prevent damage to your computer. IRQL NOT LESS OR EQUAL If this is the first time you've seen this stop error screen,restart your cmputer. If this screen appears again,follow these steps: Check to make sure any new hardware or software is proqerly installed. If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software.Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components,restart your computer,press F8 to select Advanced Startup Options,and then select Safe Mode. Technical information: STOP: 0x0000000A(0x000000D7,0x00000002,0x00000000,0x804ED977) Beginning dump of physical memory Physical memory dump complete. Contact yor system administrator or technical support group for further assistance. Windows XPを使ってます。 このブルースクリーンが出ないようにするには、どうすればいいのか教えてください。よろしくお願いします。

  • ブルースクリーンのエラーメッセージに・・・

    印刷をしようとすると下の様なエラーメッセージが出てしまいます。 いろいろ調べてみたのですが解決法がよくわからず困っています・・ どなたかわかる方お願いします。 A problem has been decated and windows has been shut down to prevent damage to your computer. BUGCODE_USB_DRIVER If this is the first time you`ve seen this stop error screen, restart your computer. If this screen appers again, follow these steps: Check to make sure any new hardware or software is propery installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as catching or shadowing. If you need to use safeMode to remove or disable components, restart your computer, press F8 to select Advanced start up options, and then select safeMode. Technical information Stop:0x000000FE(0x00000005,0xFEBC30E0,0x808624C2,0xFEF4D518) Begining dump of physical memory Physical memory dump complete. Contact your system administrator technical support group for further assistance. です。 情報としては ・Windows XP ・印刷時以外は起こらない よろしくお願いします。

  • ブルー画面エラー

    このような画面がでてしまいました。 どうすればよいのでしょうか。 よろしくお願いします。 a problem has been detected and windows has been shut down to prevent damage to your computer. page_fault_nonpaged_area if this is the first time you've seen this stop error screen, restart your computer. if this screen appears again, follow these steps: check to make shre any new hardware or software is properly installed. if this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. if problems continue, disable or remove any newly installed hardware or software. disable bios memory options such as caching or shadowing. if you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select safe mode. technical information: stop: 0x00000050 (0xE14D4810,0x00000000,0x8055259a,0x00000001) Beginning dump of physical memory dumping physical memory to disk: 24