• ベストアンサー

起動ディスクでも起動が,,,

こんばんわ WinXPHのSP2搭載の NECのVALUESTARのPC-VT5707Dなんですが 昨日まで正常に起動終了ができていったのに今朝立ち上げてみると 次のファイルが壊れているため起動できません C:?WINDOWS?SYSYTEM32?CONFIG?SYSTEM 以下省略 となりSP2のブートFDを使用して修復の準備に入ったのですが最後の6枚目のディスクを入れた途端に A problem has been detected and windows has been shut down to prevent damage to your computer, UNMOUNTABLE_BOOT_VOLUME If this is the first time you’ve seen this stop error screen, restart your computer. If this screen appears again, follow these: check to make sure any hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Start up Options, and then select Safe Mode. Techical information: STOP0x000000ED(0x816A1998,0xC0000013,0x00000000,0x00000000) とでって回復コンソールすら起動できません。 因にセフーティーモードも起動できません。 なんとか中のデータは救出したいのですが何か方法はないでしょうか? またこの用に成った原因は何が有るのでしょうか? 勿論周辺機器などは新たに増設などはしておりません。 お忙しい中誠に申し訳ありませんが皆様のご意見をお聞かせ下さい。 長文になりましたが宜しくお願い致します。

質問者が選んだベストアンサー

  • ベストアンサー
noname#161749
noname#161749
回答No.1

0x000000EDのエラーは起動ボリュームのマウントに失敗したというエラーのはずです、 ハードウェアの問題の他に、 内蔵IDEのNTFSボリュームで無効なキャッシュデータが書き込まれた場合にマウント失敗というのもあったかと、 HDDを取り出して別のPCに内蔵させるか外付けHDDにケースに入れて、 別のPCでCHKDSKをかける、 もしくはNortonGhostなんかのHDDコピーツールで外付けHDDなどにボリュームをコピーし、 そのHDDを別のPCでCHKDSKかけ、 再度Ghostで内蔵HDDのCドライブへ書き戻してみるとか。

adviser
質問者

お礼

お礼を書くの忘れていました。 ご回答ありがとうございます。

その他の回答 (1)

  • maaaa
  • ベストアンサー率14% (4/27)
回答No.2

くわしいことわかりませんが 私がやっている方法はほぼ90%救済できています IDDのHDD(ハードディスク)を購入します 20Gで数千円、10G以下なら捨てるような値で 売っています。 (1)まず現行のHDDを取り外します  これで、現状より病状が進むことはないわけです (2)新しいHDDをつけてWindowをInstallします (3)元のHDDをディップスイッチでセカンダリーにセットします (4)これで立ち上げると  元のHDDはD:ドライブ(PCの環境にもよる)に認識されて  必要はファイルを取り出してください 但しWindowXPのソフト所有の前提になりますが

adviser
質問者

お礼

お礼を書くの忘れていました。 ご回答ありがとうございます。

関連するQ&A

  • pcの電源をつけたらWindowsが起動する代わりに青いバック画面に白

    pcの電源をつけたらWindowsが起動する代わりに青いバック画面に白い文字の英文が出てきました。対処方法がわからないので英文の訳をお願いいたします。 check to make sure any new hardware or software is properly installed . If this is a new insatllation, ask your hardware or software manufacturer for any windows updates you might need. If preblems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components,restart your computer, press F8 to select Advaced startup options,and then select safe Mode. Technical infomation: stop: 0x0000C1F5 (0x00000000,0x00000000,0x00000000,0x00000000)  長くてすみません。 宜しくお願いいたします。

  • パソコンが急にブルー画面になり再起動します

    パソコンが急にブルー画面になり再起動してしまいます。昨日も同じブルー画面になり再起動しました。 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: iaStor.sys If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x70860002 (0x00000003, 0x00000002, 0x00000017, 0x00000000) *** iaStor.sys - Address 0x8bc5ee47 base at 0x8bc01000 DateStamp 0x4b071eec とでてきて再起動します。 パソコンはwindows7です。

  • 起動しません・・・・助けてください!

    パソコンがフリーズしたので 強制終了をし、再度立ち上げようと思ったら 青い画面に英文が書かれており起動できなくなりました。セーフモードでも動きません・・・・・・ 大事なデーターがある為リカバリはしたくありません。どうか助けてください。お願いします。 ■パソコン:FUJITSU ■機種:BIBLO NB9/90R ■OS:Win XP Home ■英文: a problem has been detected and windows has been shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME if this is the first time youve seen this stop error screen,restart your computer.if this screer appears again,follow these steps: check to make sure any new hardware or software is properly installed. if this is a new installation ask your hardware or software manufacturer for any windows updates you might need. if problems continue,disable or remoue any newly installed hardware or software.disable bios memory options such as caching or shadowing. if you need to use safe mode to remove or disable select advanced startup options and then select technical infor mation: STOP:0x000000ED(0X817885D98,OXC0000032,0X00000000,0X00000000

  • ノートパソコンを起動すると…

    ノートパソコンを起動すると たまに下のような英文が出てきます。 そして、ウィンドウズが起動しません。 どなたかパソコン&英語に詳しい方お願いします。 check to make sure any new hardware or software is properly installed. if this is a new installation, ask your hardware of software manufacturer for any windows updates you might need. run the driver verifier against any new ( or suspect ) drivers. if that doesn't reveal the corrupting driver,try enabling special pool . both of these features are intended to catch the corruption at an earlier point where the offending driver can be identified. if you need to use safe mode to remove or disable components,restart your computer , press F8 to select advanced startup options , and then select safe mode. if this is the first time you've seen this stop error screen , restart your computer. if this screen appears again,follow these steps: check to make sure any new hardware or software is properly installed. if this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. if problems continue,disable or remove any newly installed hardware or software . disable bios memory options such as caching or shadowing. if you need to use safe mode to remove or disable components, restart select safe mode . technical information: パソコンは 日立のPriusで、OSはXPです。

  • XPが起動できない

    普通に使っていたのですが、突然ブルー画面で「A probem has been detected and windows has been shut down to prevent damege to your computer. UNMOUNTABLE_BOOT_VOLUME If this screen appears again, follow these steps: check to make sure any new hardware of software is proberly installed. If this is a new installation, ask your hardware of sortware manufacturer for any windows update you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select safe mode. Technical information: *** STOP: 0x000000ED (0x82FEB3D8, 0xC0000006, 0x00000000, 0x00000000)」となり、以降セーフモードも含めてWindowsが起動できなくなりました。松下のCF-W2ですが、リカバリDVDがないのでオークションで探しています。どうしたら良いか、回復方法を教えて下さい。

  • 起動中にブレーカーが落ちて、それから起動しない・・・。

    同じような質問がありましたが、それでもわからないので質問します。 2週間前に初めての自作デスクトップPCを作り、windows xp pro をインストールして使っていました。 今日、パソコンを起動中にブレーカーが落ちてしまいました。 それから下のような文が青い画面に出て、それ以上進みません。 a Problm has been detected and windows has been shut down to prevent damage to your computer. DRIVER_IROL_NOT_LESS_OR_EQUAL if this is the first time you've seen this stop error screen. restart your computer.if this screen appears again follow these steps: check to make sure any new hardware or software is properly insalled. if this is a new installation,ask your hardware or software manufacturer for any windows updutes you might need. if prablems continue,disable or remove any newly installed haredware or software. Disable BIOS memory options suchas caching or shadowing. if you need to use safe Mode to remove or disable components,reatart your computer,press F8 to select Advanced startup options,and then select safe Mode. Technical information: STOP:0x000000ED(0x81FDE900,0x⊂00000032 0x0000000,0x00000000 そこでセーフモードで起動しようとしたのですが、上と同じ画面が出てきます。 これはハードウェアやソフトウェアがダメになってしまったということでしょうか? また、この状態でwindows xpを再インストールするにはどうすればいいのでしょうか? バイオス設定でCDROMを最初に読み込むようにして、セットアップCDを入れているはずなんですが、インストール画面にならないんです。 わかる方、いましたら教えてください。

  • 起動しようとすると、青い画面に英語でズラ~っと文字が出てきて止まってしまいます

    DELLのINSPIRONというノートPCを使っています。 2~3日前から、起動しようとすると青い画面になり英語でずら~っと文字が出てきたきり、止まってしまいます。 何度試しても同じで全く使えません。どうしたら良いでしょうか・・。 出てくる英語の文字は A problem has been detected and windows has been shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME If this is the first time you've seen this stop error screen. restart your computer.If this screen appears again,follw these steps: Check to make sure any new hardware or software is properly installed.If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select safe mode. Technical information: STOP: 0×000000ED(0×8571B5F0,0×C0000006,0×00000000,0×00000000) と、出ています。長々とすみません・・。やっぱり故障でしょうか・・。困っています。

  • パソコンが起動しません。

    パソコンが起動しません パソコンを起動しようとすると、以下のようなエラーメッセージのような文章が表示されます 文字色は白で、背景色は青です。 A problem has been detected and windows has been shut down to prevent damage to your computer If this is the first time you`ve seen this stop error screen, restart your computer. If this screen appears agin,follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. select Safe Mode Technical information: STOP: 0x0000008E(0x81331908,0xc000009C,0x00000000,0x00000000) バックアップを取ろうにもパソコンが立ち上がらないので、取りようがありません。。。 先日は前回正常起動時の構成(正しく動作した最新の設定)にしたら、立ち上がりました。 それから2回ほどは普通に立ち上がったのですが、昨日立ち上げようとしたら立ち上がらなくなりました。 過去ログやグーグルなどで調べてみたのですが、解決策が分かりません・・・ 何卒よろしくお願いします。。。 今は妹のパソコンから質問させてもらっています。。

  • PC起動できません。

    最近PCの調子が悪く、前日にリカバリをかけたのですが、ある程度進んだ段階の再起動時点からブルースクリーンが表示されて、通常起動が出来なくなりました。 電源入れ直してセーフモードや修復選択にするも、 またブルースクリーンになってしまいます。 表示↓ A problem has been detected and windows has been shut down to prevent damage to your computer. CLFS.SYS PAGE_FAULT_IN_NONPAGED_AREA If this is the first time you've seen this stop error screen,restart your computer.If this screen appears again,follow these steps: Check to make sure any new hardware or software is properly installed.If this is a new installation.ask your hardware or software manufacturer for any windows updates you might need. If problems continue.disable or remove any newly installed hardware or software.Disable BIOS memory options such as catching or shadowing.If you need to use safe mode to remove or disable components.restart your computer,press F8 to select Advanced startup Options,and then select safe mode. Technical information: ***STOP:0x00000050(0x902FF018,0x00000000,0x8042C367,0x00000000) *** CLFS.SYS - Address 8042C367 base at 8042B000,DateStamp 4549acbc 以上。 どうすればいいのか全く解りません(汗)教えてください。

  • 起動するたびにブルースクリーンが出てしまう

    PC起動するたびにブルースクリーンになってしまう 今朝パソコンを起動すると以下のようなメッセージが青い画面に表示されて何も操作できませんでした。仕方なく電源ボタン長押しで強制終了し、再び電源を入れると黒い画面でスタートアップ修復(推奨)かWindowsを起動するかを選択する画面が出てきました。スタートアップ修復で修復し、数分待つとWindows7が通常起動しました。その晩、再び起動するとまたブルースクリーンが出てしまいました。何が原因なのでしょうか? A problem has been detected and windows has been shut down to prevent damage to your computer. IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps : Check to make sure any new hardware or software is proparly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced startup options, and then select Safe Mode. Technical information : ### STOP : 0x0000000A (0x0000000000000000, 0x0000000000000002, 0x0000000000000000, 0xFFFFF800038FB174)