• 締切済み

PCトラブル

PCトラブル発生しました。 PCはNEC77E Windows7 air videoをダウンロードしたのですが、エラーが発生するので、一度アンインストールをしようとしたのですが、このようなメッセージが出てしまい困っています。 Are you sure you want to remove air video server 2.4.3 and all its components? ゛はい¨か¨いいえ”と出ますのではいをクリックすると、今度は air video server now press retry to automatically close air video server and continue or press cancel the installation entirely と出て 再試行をクリックしても、何度も同じ画面の繰り返しで、その後に進めません。PC初心者なので、とても困ってます。どなたか詳しく教えていただけると助かります。宜しくお願いします。

みんなの回答

  • nonamochi
  • ベストアンサー率62% (228/365)
回答No.1

こんばんは セーフモードに入ってアンインストールしてみてください。 セーフモードへ入るには、PCの電源を入れ、画面表示が始まったらF8キーを連打です。

関連するQ&A

  • PCが立ち上がらなくなってしまい、困っています2

    先日ブルースクリーン?で困って質問した者です。 英字の内容を書きます。この場合、直るでしょうか? A problem has been detected and windows has been shut down to provent damage to your computer. UNMOUNTABLE_BOOT_VOLME If this is the first time you've seen this stop errer screen, restart your computer.If this screen appears again,follw these steps:check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows up dates you might need. If problems continue,disable or remove any newly installed hardware or software.Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components,restart your computer,press F8 to select Adovanced start up options,and ther select safe mode. Technical information:STOP:0x000000ED(0x865C5C08,0x0000006,0x00000000,0x00000000)

  • 「プログラムの追加と削除」に「Virus」というのがあります。

    「プログラムの追加と削除」に「Virus」というのがあります。 これは何なのでしょうか? いつから存在しているのかは全く見当がつきません。 サイズ欄(MB)は空白です。 削除しようとするとAre you sure you want to completely remove Virus and all of its components?と表示されます。 削除してしまっても大丈夫でしょうか。 PCは「DELL Precision60(Windows XP SP3)です。 よろしくお願いします。

  • PCが起動しません ブルースクリーン

    今までは何のトラブルもなく起動してましたが このPCを他の部屋に移動して一週間くらいで以下のエラーがでました A problem has been detected and windows has been shut down to prevent damage to your computer. If this is tha first time you've seen this stop error screen, restart your computer.If this screen appears again, follow these steps: Run a system diagnostic utillty supplied by your hardware manufacturer. In particular,run a memory check,and sheck for faulty or mismatched memory. Try changing video adapters. Disable or remove any newly installed hardware and drivers. Disable or remove any newly installed software. If you need to use safe mode to remove or disable components,restart your computer, press F8 to select Advanced startup Optione, and then select Safe Mode. いきなりブルースクリーンになり、今では起動もできない状態です 翔訳してみたんですが、意味がわかりません 前よりも若干暖かい部屋に移動したから冷却装置の問題なのでしょうか? PCのスペックは起動できないため詳細がわからないのですが CPUはCORE2DUO 2.4GHz  メモリ 2G  です よろしくお願いします

  • PCを起動してもすぐに青い画面になってしまいます。

    dpgencを使用していたら突然青い画面に白字で以下の文が表示されました。 A problem has been detected and windows has been shut down to prevent damege to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again,follow these steps: Run a system diagnostic utility supplied by your hardware manufacturer.In particular, run a memory check, and check for faulty or mismatched memory.Try changing video adapters. Disable or remove any newly installed hardware and drivers.Disable or remove any newly installed software.If you need to use safe mode to remove or disable components,restart your computer,press F8 to select Advanced startup option,and then select safe mode. Technical information: ***STOP:0x0000007F(0x0000000D,0x00000000,0x00000000,0x00000000) Beginning dump of physical memory physical memory dump complete. Contact your system administrator or technical support group for further assistance. その後何度PCを起動しても、この画面になってしまい何もできない状態です。 PCの詳しいスペックは起動できないので分からないのですが、 DELL Dimension8400 WindowsXPです。 どうしたらよいのでしょうか? どなたか教えてください、よろしくお願い致します。

  • トラブルが起きました・・。

    ワードやネットなど作業中に突然、バックに青い画面と共にしたのような白い文字のメッセージが出て、止まってしまいます。 どのような対処をしたら良いのでしょうか? A problem has been detected and windows has been shut to prevent damage to your computer. Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe Mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select Mode. Technical information: STOP:0x0000008E(0xc0000005,0XBF89136C,0XFA4EA58,0x00000000) win32k.sys-Address BF89136C base at BF800000,datestamp 411033af 0x0000008E(0xc0000005,0XBF89136C,0XFA4EA58,0x00000000)win32k.

  • PC壊れた?!

    ウィンドウズを終了させてやり忘れたことを思い出してスグにまた電源を入れたら、おかしな事になってしまい今、次の英文が出た状態で止まってます…分かる単語が少なくて困ってます。。。誰か対処法を教えて下さい。 A problem has been detected and windows has been shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again,follw these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need tu use safe Mode to remove or disable components ,restart your computer,press F8 to select Advanced startup Options,and then select safe Mode. Technical information: ***stop:0x000000ED(0x81351E30,0xC0000006,0x00000000,0x00000000) ここまでです。 これを読んで対処法が分かる方、パソコンに疎い私でも分かるように教えていただけたらありがたいです。 最後の行の文字はゼロかオーかは、分かりません… 保存しておいた画像とか消えてるんでしょう…それは仕方ないと諦めます… また使えるようになれば、それでいいです… osはwindows XPです。

  • アプリケーションのトラブル?

    お分かりになる方教えて下さい。かなり、困っています。 昨日まで問題無く使用していましたが、本日電源ONすると「DocumentViewer」というダイアログが現れ、 『The feature you are trying to use is on a CD-ROM or other removble disk that is not available. Insert the "DocumentViewer" disk and click OK.』メッセージがあり、[OK]を選ぶと、次は『The path "1" cannot be found.Verity that you have accessto this location and try again,or try to find the installation package "DocumentViewermsi" in a folder from which you can install the product DocumentViewer.』となり、またもや[OK]しか選ぶことが出来ないので実行すると最初のダイアログになります。[cancel]を選ぶと『アプリケーションのコンポーネントで、ハンドルされていない例外が発生しました。[継続]をクリックすると、アプリケーションはこのエラーを無視し、続行しようとします。 オブジェクト参照がオブジェクト インスタンスに設定されていません。。』となり[続行]を押してもこのメッセージは消えません。 何をどうしたらいいのでしょうか? お願いします!教えて下さい!

  • iTunes5にヴァージョンアップ

    WindowsXPで現在iTunes4.1を使用してます iTunes5にヴァージョンアップしようと ダウンロード完了してiTunesSetup.exeを クリックしたところ Error Some installation fiels are corrupt Please download afresh copy and retry the installation と表示されヴァージョンアップできません 解決方法を教えてください よろしくお願いいたします

  • PCゲームについて

    質問です。 最近購入したPCゲームをやろうとしてディスクをドライブにいれたところ、次のようなエラーがブルースクリーンで表示されました。 A problem has been detected and windows has been shut down to prevent damage to your computer. IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup options, and then select safe made. Technical information: *** STOP: 0x0000000A(0x0000000C,0x00000002,0x00000000,0x804F00B6) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further 私はパソコンについてはまったくの無知なのでこの手のエラーについて調べたりしてみたのですが、解決策が見つかりません。 なのでどなたか解決策をお教えいただければと思います。 PCのOSはXPです。

  • PCが壊れたかも!?

    PCが、使っている途中で勝手に落ちて再起動したり、 ブルーバックになったりします。 そんなことが何回も続くので、質問しました。どうしたら直るでしょうか? スペックが必要なら補足いたします。デスクトップです!くらいしか今はよくわかりませんw調べますw 祖父にもらったものな上に、PC初心者ですので情報が足りなくてスイマセンm(__)m 以下が、ブルーバックの内容になります A problem has been detected and windows has been shut down to prevent damage to your computer. PAGE_FAULT_IN_NONPAGED_AREA If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again,follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or softwqre.Disable BIOS memory options such as caching or shadowing. if you need to use safe mode to remove or disable components,and then select safe mode technical information: *** stop: 0x00000050 (0xFFFFF88014AF6D20,0x0000000000000000,0xFFFFF80003AAC4E1,0x0000000000000002) collecting data for crash dump...