Windows7 ブルースクリーンの解決方法

前へ 次へ
このQ&Aのポイント
  • 先日PCを自作したのですが、シャットダウンするときに１００％ブルースクリーンになってしまいます。試した解決方法が効果がなく困っています。
  • ブルースクリーンエラーが発生し、下記のようなメッセージが表示されます。解決方法を探しても効果がなく困っています。
  • Windows7の自作PCをシャットダウンする時にブルースクリーンエラーが発生して困っています。解決方法が分かる方、お助けください。
回答を見る
  • ベストアンサー

Windows7 ブルースクリーンについて

先日PCを自作したのですが、シャットダウンするときに１００％ブルースクリーンになります。 画面には下記のように表示されます。 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: PAGE_FAULT_IN_NONPAGED_AREA If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x00000050 (0xfffff888037f9428, 0x0000000000000000, 0xfffff880037f680a, 0x0000000000000005) *** - Address 0x0000000000000000 base at 0x0000000000000000 DateStamp 0x00000000 いろいろ調べて、試してみてもなかなか有効な解決方法がが見つかりません。 解決するために御助力していただけたら幸いです。 どうかよろしくお願いしますm（＿ ＿）m

質問者が選んだベストアンサー

  • ベストアンサー
  • bunjii
  • ベストアンサー率43% (3589/8248)
回答No.1

自作PCと言うことなので、パーツの組み込み状態の再確認をお勧めします。 特にメモリーの差し込み状態は念入りに調べるべきです。 また、BIOSのアップデートの有無を確認して、最新版を適用することも念頭に対処してください。

putitomato08
質問者

お礼

全てのパーツの接続また不良等を調べた結果USBポート増設のためのPCIカードが原因でした。bunjiiさんのアドバイスのお陰で解決することができました！ 今回は当方の質問に回答して下さり本当にありがとうございましたm(＿ ＿)m

  1. カテゴリ
  2. パソコン・スマートフォン
  3. Windows
  4. Windows 7

関連するQ&A

  • ブルースクリーンが出て・・・

    A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntoskrnl.exe BAD_POOL_HEADER If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x00000019 (0x0000000000000022, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000) *** ntoskrnl.exe - Address 0xfffff80003eba700 base at 0xfffff80003e4a000 DateStamp 0x4d9fdd34 というブルースクリーンが出てたまにＰＣが落ちます 対処法を教えてくださいお願いします

  • ブルースクリーンの対処方法

    自宅のPCがブルースクリーン連発で対処方法がわからなく困っています。 BlueScreenViewを使い　(主に２個出てくるので２個貼り付けました) ブルースクリーンのところを抜き出してみました 一つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: DRIVER_IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x000000d1 (0xfffff8800a044638, 0x0000000000000002, 0x0000000000000008, 0xfffff8800a044638) *** - Address 0x0000000000000000 base at 0x0000000000000000 DateStamp 0x00000000 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntoskrnl.exe PAGE_FAULT_IN_NONPAGED_AREA If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x00000050 (0xfffff90098c74f5c, 0x0000000000000000, 0xfffff960000577f2, 0x0000000000000002) *** ntoskrnl.exe - Address 0xfffff80004076bc0 base at 0xfffff80004001000 DateStamp 0x521ea035 どうかよろしくお願いします。

  • windows7のブルースクリーンで泣きそうです。

    フリーソフトを使いパーテーションを分けようと操作実行した所 いつの間にかブルー画面になってしまいました。 A problem has been detected and windows has been shut down to prevent damage to your computer DRIVER_POWER_STATE_FAILURE If this is the first you've seen this stop error screen,restart your computer. If this screen appears again,follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000009f (0X0000000000000004,0X00000000000000258,0XFFFFFA80036D5050,0XFFFFF80000B9C3D0) Collecting data for crash dump... Initilizing disk for crash dump... Beginning dump of physial memory. Dumping physical memory to disc: 100 Physical memory dump complate. Contact your system admin or technical support group for further assistance. 電源落ちません。どうしたらいいでしょうか？

  • ブルースクリーンが起こってしまったのですが

    質問をさしてもらい ブルースクリーンということが分かり (対処の仕方がわかりません) BlueScreenView を使い　(何個かありましたが数が多かったので何個かはりました) ブルースクリーンのところを抜き出してみました ハードディスクのバックアップはとらなくても大丈夫でしょうか A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: USBPORT.SYS DRIVER_IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x000000d1 (0x0000008c, 0x00000002, 0x00000000, 0x8fbc62c4) *** USBPORT.SYS - Address 0x8fbc62c4 base at 0x8fbc0000 DateStamp 0x49e01fcf 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x00000063, 0x0000001b, 0x00000001, 0x82ec15ce) *** ntkrnlpa.exe - Address 0x82e67fd9 base at 0x82e1a000 DateStamp 0x4cb710d6 三つめ A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: Ntfs.sys NTFS_FILE_SYSTEM If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x00000024 (0x001904aa, 0xbf7b7a18, 0xbf7b7714, 0x82ebe22c) *** Ntfs.sys - Address 0x8b41cfff base at 0x8b403000 DateStamp 0x49e0192a

  • ブルースクリーンが起こってしまったのですが

    質問をさしてもらい ブルースクリーンということが分かり (対処の仕方がわかりません) BlueScreenView を使い　(何個かありましたが数が多かったので何個かはりました) ブルースクリーンのところを抜き出してみました ハードディスクのバックアップはとらなくても大丈夫でしょうか (色々と対処をしてもまた別の原因でブルースクリーンが起こってしまった場合はどうすればよいでしょうか) A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: luafv.sys IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x6c006160, 0x0000001b, 0x00000001, 0x82ef55ce) *** luafv.sys - Address 0x91be4036 base at 0x91bdb000 DateStamp 0x47918afb 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: tmcomm.sys PAGE_FAULT_IN_NONPAGED_AREA If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x00000050 (0xd76c5da4, 0x00000000, 0x807c6d5b, 0x00000002) *** tmcomm.sys - Address 0x8f28ce4b base at 0x8f287000 DateStamp 0x49d4727e

  • ブルースクリーンエラー

    少し前に質問させてもらったのですが、やはりまだ頻繁にでるので質問させてください。 ログをとったので対処法を教えてもらえないでしょうか？ よろしくお願いします PAGE_FAULT_IN_NONPAGAED_AREA If this is the first time you're seen this stop error screen,restart your computer,If this screen appears again,fallow these steps: check to make sure any new hardware or software is properly installed. Ifthis is a new istallation,ask yore hardware or software manufacturer for any windows updates you mightneed. If problems continue,disable or remore any newly installed hardware or software,Disable BIOS memory options such as caching or shadowing. If you need touse sofeMode to remove or disable components,restart your computer,press F8 to select Advanced startup options,and then select safeMode. Technical in for mationi *** Stop:0x00000050(0xBAO0154,040000000,0x8058388F,0x00000000)

  • ブルースクリーン現象になりました

    質問をさしてもらい ブルースクリーン現象ということが分かり (対処の仕方がわかりません) BlueScreenView を使い　(何個かありましたが数が多かったので何個かはりました) ブルースクリーンのところを抜き出してみました ハードディスクのバックアップはとらなくても大丈夫でしょうか A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x9589a9b8, 0x00000002, 0x00000000, 0x82ebb60b) *** ntkrnlpa.exe - Address 0x82e4ffd9 base at 0x82e02000 DateStamp 0x4cb710d6 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x00000000, 0x0000001b, 0x00000000, 0x82e95c94) *** ntkrnlpa.exe - Address 0x82e9bfd9 base at 0x82e4e000 DateStamp 0x4cb710d6 三つめ A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe CACHE_MANAGER If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information:

  • ブルースクリーン

    A problem has been detected and windows has been shut down to prevent damage to your computer. IRQL_NOT_LESS_OR_EQUAL If this the first time you've seen this stop error screen,restart your computer. If this screen appears again,follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe Mode to remove or disable components,restart your computer,press F8 to select Advaned Startup options,and then select safe Mode. Technical information: *** STOP:0X0000000A(0X00000054,0X00000002,0X00000001,0X804DDC8E) Beginning dump of physical memory physical memory dump complete. contact your system administrator or technical support group for further assistance. 起動したときに上記のように書いてありました。 意味がわかりません・・・

  • ブルースクリーンになった

    たびたびブルースクリーンになりますが、 今回は *** STOP: 0x0000001D(0xB64F736A,0xBACD79B4,0x00000000) 前回は A problem has been detected and wiondows has been shut to down to prevent damage to your computer. ORQL-NOT-LESS-OR-EQUAL If this si thefirst time you`ve seen this stop error screen, restart your computer. If this screen again,follow these steps: check to meke sure any new hardware or spftware is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components,restart your computer, press F8 to select advanced startup option, and then select safe mode. Technical information: *** STOP: 0x0000000A (0x00000010,0x00000002,0x00000001,0x8051873C) beginning dump of physical memory physical memory dump complete. Contact your system administrator or technical support group for further assistance. 教えてください、お願いします。

  • ブルースクリーン

    A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntoskrnl.exe ATTEMPTED_SWITCH_FROM_DPC If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x100000b8 (0xb2cb3490, 0x80ccca48, 0xb35d7000, 0x00000000) *** ntoskrnl.exe - Address 0x824c0246 base at 0x82418000 DateStamp 0x4a77feb3 ↑の様なブルースクリーンが出て困っております。 ntoskrnl.exeが原因なのでしょうが、何が何だか分かりません。 至急解決策をお願いします。

注目のQ&A

カテゴリ

専門家に質問してみよう

職業から探して質問する

あなたにピッタリな商品が見つかる！ OKWAVEセレクト

質問する