エラー0x00000050 PAGE_FAULT_IN_NONPAGED_AREA

このQ&Aのポイント
  • ネットゲームを起動しようとしたところ、ブルーバックのエラーが発生し、起動できません。
  • ネトゲ以外は問題なく作動しています。
  • 解決法についてご教示ください。
回答を見る
  • ベストアンサー

エラー0x00000050 PAGE_FAULT_IN_NONPAGED_AREA

昨日まで普通にできていたネットゲームを本日起動しようとしたところ、以下のようなブルーバックのエラーがでて起動できませんでした。 解決法はありますでしょうか? よろしくお願いします。 ※ネトゲ以外は問題なく作動しています。 ※ネトゲは一度アンストかけた後にインストしてみましたが、症状に変わりありませんでした。 OS:WindowsXP Home SP2 CPU:Pentium4 2.53Ghz メモリ:1G グラボ:NVIDIA GeForce 6600 A problem has been detected and windows has been shut down to prevent damage to your computer. PAGE_FAULT_IN_NONPAGED_AREA If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe mode to remove or disable components,restart your computer, press F8 to select Advanced Startup Options, and then select Safe mode. Technical information: STOP: 0x00000050 (0xBFFFFFF4,0x00000000,0xF0C3B4BC,0x00000002)

質問者が選んだベストアンサー

  • ベストアンサー
  • goold-man
  • ベストアンサー率37% (8365/22183)
回答No.2

追加 >STOP: 0x00000050 2002.11.23ブログ参照 アンチウイルス プログラムを無効にするかアンインストールする。

参考URL:
http://tomocha.net/diary/index.cgi?200211
bonnta
質問者

お礼

ウィルスバスターのアンストで解決しましたb ありがとうございました。

その他の回答 (2)

  • goold-man
  • ベストアンサー率37% (8365/22183)
回答No.3

追加 機械翻訳からの概略 PAGE_FAULT_IN_NONPAGED_AREAのエラーを初めて見た場合は、コンピューターをセーフモードで再開してください。 エラーが再度の場合は、新しいハードウェアあるいはソフトウェアが正常にインストールされているか確認してください。 新しいドライブ(装置)である場合は、ドライバの最新版をハードウェアかソフトウェア・メーカーのサイトに求めてください。 トラブルが継続する場合は、新しくインストールされたハードウェアあるいはソフトウェアを停止するか削除してください。 BIOSメモリ・オプションを不能にしてください。(何のオプションか意味がわかりません) 技術情報:0x00000050(0xBFFFFFF4、0x00000000、0xF0C3B4BC、0x00000002) 「0x00000050」で検索するとたくさんヒットするはずです。

  • goold-man
  • ベストアンサー率37% (8365/22183)
回答No.1

セーフモードで起動して、とあるようですが、起動できないのですか? セーフモード(電源入れロゴが出たらF8を軽くトントン叩きセーフモードなどのメニューで「前回正常時の構成」を選び起動)

関連するQ&A

  • stop: 0X0000006f エラーが出ました

    A problem has been detected and windows has been shut down to prevent damage to your computer. SESSION3_INITIALIZATION_FAILED If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears agin, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical information: ***STOP: 0x0000006F (0x0000020, 0x00000000, 0x00000000, 0x00000000) 昨夜まではちゃんと動いてたんですけど 最近 起動 シャットダウン が若干遅くなっていたような気はします。 青い画面の英文を写し取ってる間中 スピーカーからカサカサと雑音が聞こえていました。 考えられる原因をお願いします。 m(__)m dynabook Satellite J31 Win.XP Pro (※EVEREST Home のセンサーで内部温度は40℃程度です)  別PCからの掲載です  情報が不足の場合、即時追加させていただきます。

  • ブルースクリーンエラー

    少し前に質問させてもらったのですが、やはりまだ頻繁にでるので質問させてください。 ログをとったので対処法を教えてもらえないでしょうか? よろしくお願いします PAGE_FAULT_IN_NONPAGAED_AREA If this is the first time you're seen this stop error screen,restart your computer,If this screen appears again,fallow these steps: check to make sure any new hardware or software is properly installed. Ifthis is a new istallation,ask yore hardware or software manufacturer for any windows updates you mightneed. If problems continue,disable or remore any newly installed hardware or software,Disable BIOS memory options such as caching or shadowing. If you need touse sofeMode to remove or disable components,restart your computer,press F8 to select Advanced startup options,and then select safeMode. Technical in for mationi *** Stop:0x00000050(0xBAO0154,040000000,0x8058388F,0x00000000)

  • 0x0000000Aエラー

    最近頻繁にブルーバック画面になります OS起動中または起動後です。 OSはWindows XPのSP2です メッセージは以下のとおりです A Problem has been detected and windows has been shut down to prevent damage to your computer. IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer.If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed.If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select safe mode. Technical information: STOP:0x0000000A(0xFFFE8080,0x00000002,0x00000001,0x806ED2DC) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further assistance. Web検索などしてみましたがよくわからなかったので質問させていただきました。よろしくお願いします

  • エラー画面の対処法

    pcを起動すると、最終的には次のエラー画面が出て起動できません。 a problem has been detected and windows has been shut down to prevent damage to your computer. Unmountable_boot_volume If this is the first time you’ve seen this stop error screen, Restart your computer. If this screen appears again, follow these steps; Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. 新しいインストールとかはしてないんですが、確認する方法とか取り除き方がわかりません…。 BIOS memoryを無効にするやり方がわかりません…。 最後のセーフモードは試しましたが効果なしです。 どなたか教えてください。

  • パソコンのブルースクリーンエラーで困っています

    最近パソコンの電源をシャットダウンする3回に1回はフリーズしブルースクリーンがでます。 内容は A problem has been detected and windows has been shut down to prevent damage to your computer IRQL_NOT_LESS_OR_EQUAL if this is the first time you've seen this stop error screen, restart your computer. if this screen appears again, follow these steps Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or softwaremanufacture for any windows updates you might need. If problems continue disable or remove any newly installed hardware or software, Disable BIOS memory options such as cathing or shadowing. If you need to use safe mode to remove or disable components. restart your computer press F8 to select Advanced startup options. and then select safe mode. Technical information STOP 0×0000000A(0×0000000C,0×00000002,0×00000000,0×80507496) です。 このエラー表示をみて解決策が分かる方いましたら分かりやすく教えてください。お願いしますm(__)m

  • ブルー画面エラー

    このような画面がでてしまいました。 どうすればよいのでしょうか。 よろしくお願いします。 a problem has been detected and windows has been shut down to prevent damage to your computer. page_fault_nonpaged_area if this is the first time you've seen this stop error screen, restart your computer. if this screen appears again, follow these steps: check to make shre any new hardware or software is properly installed. if this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. if problems continue, disable or remove any newly installed hardware or software. disable bios memory options such as caching or shadowing. if you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select safe mode. technical information: stop: 0x00000050 (0xE14D4810,0x00000000,0x8055259a,0x00000001) Beginning dump of physical memory dumping physical memory to disk: 24

  • このようなエラーがでて困っています

    A problem has been delected and windows has been shut down to prevent damage to your computer. IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer.If this screen appears again,follow thiese steps: Check to make sure any new haedware or software is properly installed. If this is a new installation,ask your hardware or software manu facturer for any windows updates you might need. If problem continue disable or remove any newly installed hardware or software,Disable BIOS memory options such as caching or shadowing If you need to use safe mode to remove or disable computers,restart your Computer,press F8 to select Advanced start up options,and then select safe mode. Technical information: ☆☆☆ STOP:0x0000000A(0x00000000,0x0000001c,0x804FCEE4) Beginning dump of phy sical memory. Physical memory dump complete Contaet your system administrater or technieal support group for further assistance というエラーです。解決方法または出なくなる方法を教えてください

  • 0x000000AF4 エラーってなんですか?

    パソコン初心者です。 先日、突然パソコンを立ち上げようとしたら、以下の文章が出てきてしまい、数字がどんどん増えていって、とまらなくなりました。 a problem has been detected and windows has been shut down to prevent damage to your computer. if this is the first time you've seen this stop error screen, restart your computer. if this screen again, follow these steps: check to make sure any new hardware or software manufacturer for any windows updates you might need. if problems continue disable or remove any newly installed hardware or software, disable bios memory options such as caching or shadowing. if you need to use sage mode to remove or disable components, restart your computer, press F8 to select Advanced startup options, and then select safe mode. technical information: 0x000000AF4 Beginning dump of physical memory Dumping physical memory to disk : これは一体、なんのエラーなのでしょうか? 先日、ノートンのアップグレードをしたのですが、それが原因なのでしょうか? 電源を切ってしばらくしたら、立ち上がったので、そのときに、 復元ポイントを試してみたのですが、よくなりません。 また再起動したら同じ画面が出てしまいます。 ほとほと困っております、アドバイスお願いいたします。

  • エラーメッセージ

    パソコンが勝手に再起動するためシステム設定で自動再起動しないようにしエラーメッセージを確認しました。 以下のようにでるのですがどうしたらいいのでしょうか?? A problem has been detected and windows has been shut down to prevent damage to your conputer. IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your conputer. If this screen appears again, follow these steps; Check to make sure any new hardware or software is properly installed. If this is a nes installation; ask your hardware or software manufacturer for any Windows updates you might need. If problem continue, disable or remove any newly installed hardware or software. Disable BIOS memory option such as caching or shadowing. If you need to use Safe Mode to remove or disable compohents, restart your computer, press F8 to select Advanced Startupp Options, and then select Safe Mode. Technical information; STOP : 0X0000000A(0X00000008,0X00000002,0X00000000,0X804FC99F)

  • BIOSを元にもどす方法

    現在、DELLのInspiron530を使っているのですが、 BIOSのバージョンを1.00から1.05にバージョンアップしたら、 パソコンをスリープ状態から起動するたびにBlueScreenになり、  A problem has been detected and windows has been shut down to prevent damage to your computer.   BAD_POOL_CALLER  If this is the first time you've seen this stop error screen,restart your computer.If this screen appears again,follow these steps:  Check to make sure any new hardware,or software is properly installed.   If this is a new installation, ask your hardware or software, manufacturer for any windows updates you might need.  If problems continu,disable or remove any newly installed hardware or software.  If problems continue, disable or remove any newly installed hardware or software.  Disable BIOS memory options such as caching or shadowing.  If you need to use safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select safe mode. (以下略) という表示が出て、強制再起動になる、という症状が出るようになってしまいました。 できれば以前のバージョンにもどしたいのですが、どうやれば戻すことができるのかわかりませんでした。 だれかわかる人いたら教えてください(>_<)