• 締切済み

ニコニコ動画やTV閲覧中のときに・・・

ニコニコ動画やTV閲覧中のときに、突然画面が真っ青になり英文のエラーメッセージが出てきます。 A problem has been detected and windows has benn shut down to prevent damage to your computer. I RQL NOT LESS OR EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again. follow check to make sure any new hardware or software or software manufacturer for any windows updates you might need. If problems continue,disabel or remove any newly installed hardware or software.Disabel BIOS memory options such as caching or shadowing. If you need to use safe Mode to remove or disable components,restart your computer,press F8 to select Advanced Startup optionm,and then select safe mode. Technical information: ***STOP: 0x0000000A(0x8BD869A8,0X0000000Z,0x00000000,0x8051DB93) というメッセージなのですが、なにが原因なのかいまいちわかりません・・・。 最近BootTimerというものを(file:///C:/Program%20Files/BootTimer/BootTimer.htm)入れ、その際BIOSを弄ったのですがタイマー起動が原因なのでしょうか?

みんなの回答

  • kentan384
  • ベストアンサー率35% (781/2203)
回答No.1

どうぞ。 http://support.microsoft.com/kb/818501/ja http://support.microsoft.com/kb/314063/ STOP: 0x0000000Aのエラー定義は、環境が間違っています。です。 おそらくBIOSを弄ったことが原因でしょう。 BootTimerはあきらめて元に戻しましょ。それでも再現するならレジストリもつかってんのかなぁ。レジストリからも削除。それでも再現するなら他に原因があります。 参考URLをじっくり検証してね。

jyajya1028
質問者

お礼

丁寧な回答をありがとうございます!! まだ買って間もないPCだったので、購入した翌日にシステムの復元をしました。 システムの復元でBIOSは直らないと思ってはいたのですが、ちょっとほかにも変なプログラムをインストールしたような覚えがあるので戻しました。 結果的にBootTimerは消え、以前のように突然ERR画面は出なくなりました。 やはりこれが原因だったと思いますが、ひとまず生兵法でBIOSを弄るのは危険な行為だと学びました(笑)

関連するQ&A

  • WindowsXPのクリーンインストールが出来ない。

     Windowsをクリーンインストールしようとしたのですが、 A problem has been detected and windows has been shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new harfware or softwareis properly installed. If this is a new installation, ask your hardware or software marufacturer for any windows updates you might need. If problems continue, disable or remove any rewly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Safe Mode. Technical information: *** STOP: 0x000000ED (0x8474c468, 0x00000000, 0x00000000) と、表示されてセットアップ画面にいきません。

  • STOPエラーでシャットダウンできません。

    よろしくお願いします タイトルの通りです。 エラー文は下記に書きます。 A problem has been detected and windows has been shut down to prevent damage to your computer. IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this Stop error screen, restart your computer . If this screen appears again, follow for any Windows updates you might need. If problems continue, disable or remove any newiy installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe mode. Technical infomation: *** STOP: 0X0000000A(0X000000B0,0X00000002,0X00000000,0X80509FAC)

  • PCが立ち上がらなくなってしまい、困っています2

    先日ブルースクリーン?で困って質問した者です。 英字の内容を書きます。この場合、直るでしょうか? A problem has been detected and windows has been shut down to provent damage to your computer. UNMOUNTABLE_BOOT_VOLME If this is the first time you've seen this stop errer screen, restart your computer.If this screen appears again,follw these steps:check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows up dates you might need. If problems continue,disable or remove any newly installed hardware or software.Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components,restart your computer,press F8 to select Adovanced start up options,and ther select safe mode. Technical information:STOP:0x000000ED(0x865C5C08,0x0000006,0x00000000,0x00000000)

  • ブルースクリーン現象になりました

    質問をさしてもらい ブルースクリーン現象ということが分かり (対処の仕方がわかりません) BlueScreenView を使い (何個かありましたが数が多かったので何個かはりました) ブルースクリーンのところを抜き出してみました ハードディスクのバックアップはとらなくても大丈夫でしょうか A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x9589a9b8, 0x00000002, 0x00000000, 0x82ebb60b) *** ntkrnlpa.exe - Address 0x82e4ffd9 base at 0x82e02000 DateStamp 0x4cb710d6 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x00000000, 0x0000001b, 0x00000000, 0x82e95c94) *** ntkrnlpa.exe - Address 0x82e9bfd9 base at 0x82e4e000 DateStamp 0x4cb710d6 三つめ A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe CACHE_MANAGER If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information:

  • パソコンで青い画面

    パソコンで青い画面になってしまい。次のようなメッセージです どこがおかしいのか さっぱりわかりません。ご指導宜しくお願いします。 初心者ですので 可能な限り手順も教えてください。 A problemhas been detectedand windows has been shut down to prevent dama to your computer. MACHINE_CHECK_EXCEPION if this is the first time you've seen this stop error screen. restart your computer. If this screen appears again,follow these steps: check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware of software.Disable BIOS memore options such as caching or shadowing If you need to use safe mode to remove or disable components restart select safe mode. Technical information *** STOP:0x0000009C(0X00000004,0X80548EF0,0x82000000,0X00070F0F) Beginning dump of physical memory

  • ブルースクリーンの対処法

    質問をさしてもらい ブルースクリーンということが分かり (対処の仕方がわかりません) BlueScreenView を使い (何個かありましたが数が多かったので何個かはりました) ブルースクリーンのところを抜き出してみました ハードディスクのバックアップはとらなくても大丈夫でしょうか A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: fltmgr.sys PAGE_FAULT_IN_NONPAGED_AREA If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x00000050 (0xd581f284, 0x00000000, 0x8b4118d9, 0x00000002) *** fltmgr.sys - Address 0x807c2ffb base at 0x807c0000 DateStamp 0x49e01907 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe ATTEMPTED_WRITE_TO_READONLY_MEMORY If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x000000be (0x993c54cc, 0x87887121, 0x8bf73c14, 0x0000000b) *** ntkrnlpa.exe - Address 0x82ed4379 base at 0x82e3c000 DateStamp 0x4cb710d6 三つめ A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: aswSP.SYS DRIVER_IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x000000d1 (0x00000000, 0x00000002, 0x00000000, 0x90e1fe38) *** aswSP.SYS - Address 0x90e1fe38 base at 0x90e05000 DateStamp 0x4d65202b

  • ブルースクリーンが起こってしまったのですが

    質問をさしてもらい ブルースクリーンということが分かり (対処の仕方がわかりません) BlueScreenView を使い (何個かありましたが数が多かったので何個かはりました) ブルースクリーンのところを抜き出してみました ハードディスクのバックアップはとらなくても大丈夫でしょうか A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: USBPORT.SYS DRIVER_IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x000000d1 (0x0000008c, 0x00000002, 0x00000000, 0x8fbc62c4) *** USBPORT.SYS - Address 0x8fbc62c4 base at 0x8fbc0000 DateStamp 0x49e01fcf 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x00000063, 0x0000001b, 0x00000001, 0x82ec15ce) *** ntkrnlpa.exe - Address 0x82e67fd9 base at 0x82e1a000 DateStamp 0x4cb710d6 三つめ A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: Ntfs.sys NTFS_FILE_SYSTEM If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x00000024 (0x001904aa, 0xbf7b7a18, 0xbf7b7714, 0x82ebe22c) *** Ntfs.sys - Address 0x8b41cfff base at 0x8b403000 DateStamp 0x49e0192a

  • ブルースクリーンの対処法

    質問をさしてもらい ブルースクリーンということが分かり (対処の仕方がわかりません) BlueScreenView を使い (何個かありましたが数が多かったので何個かはりました) ブルースクリーンのところを抜き出してみました ハードディスクのバックアップはとらなくても大丈夫でしょうか A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: hal.dll IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x00000014, 0x00000002, 0x00000000, 0x82ec40c2) *** hal.dll - Address 0x831d270c base at 0x831cb000 DateStamp 0x49e018d9 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: hal.dll ATTEMPTED_WRITE_TO_READONLY_MEMORY If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x000000be (0x95864b14, 0x8dc92121, 0xc8952ab4, 0x0000000b) *** hal.dll - Address 0x831cc70c base at 0x831c5000 DateStamp 0x49e018d9

  • ブルー画面エラー

    このような画面がでてしまいました。 どうすればよいのでしょうか。 よろしくお願いします。 a problem has been detected and windows has been shut down to prevent damage to your computer. page_fault_nonpaged_area if this is the first time you've seen this stop error screen, restart your computer. if this screen appears again, follow these steps: check to make shre any new hardware or software is properly installed. if this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. if problems continue, disable or remove any newly installed hardware or software. disable bios memory options such as caching or shadowing. if you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select safe mode. technical information: stop: 0x00000050 (0xE14D4810,0x00000000,0x8055259a,0x00000001) Beginning dump of physical memory dumping physical memory to disk: 24

  • ブルースクリーンの対処法

    質問をさしてもらい ブルースクリーンということが分かり (対処の仕方がわかりません) BlueScreenView を使い (何個かありましたが数が多かったので何個かはりました) ブルースクリーンのところを抜き出してみました ハードディスクのバックアップはとらなくても大丈夫でしょうか A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe MEMORY_MANAGEMENT If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000001a (0x00041287, 0x00000008, 0x00000000, 0x00000000) *** ntkrnlpa.exe - Address 0x82ecd379 base at 0x82e35000 DateStamp 0x4cb710d6 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: hal.dll DRIVER_CORRUPTED_EXPOOL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x000000c5 (0x62313363, 0x00000002, 0x00000001, 0x82f2e010) *** hal.dll - Address 0x82e10000 base at 0x82e0d000 DateStamp 0x49e018d9 三つめ A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: luafv.sys DRIVER_CORRUPTED_EXPOOL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x000000c5 (0x00000004, 0x00000002, 0x00000001, 0x82eff010) *** luafv.sys - Address 0x913606aa base at 0x91355000 DateStamp 0x47918afb