• ベストアンサー

ブルースクリーンについて

mukichanの回答

  • ベストアンサー
  • mukichan
  • ベストアンサー率45% (74/161)
回答No.2

最近、ソフトのアップグレード、メモリー増設、新しいハードウェアの接続等をされたでしょうか? メモリーの読み込み時に何らかの障害が出たような記述に見受けられます。 Safeモードで立ち上げてブルースクリーンが出ないか? 増設したハードウェア(メモリー等含む)を順に取り外して同じ問題が出ないか一つ一つ確認してみてください。 新しいソフトウェアならSafeモードで立ち上げてスタートアップから外しておいてから通常起動を行う等、問題点の抽出を試してみてください。 健闘を祈ります。

noname#62626
質問者

お礼

回答ありがとうございました。 システムの復元をしてみました。それでもだめなようならメーカーに問い合わせてみようと思います。

noname#62626
質問者

補足

回答ありがとうございます。 最近したことはセーフモードでエラー発生した場合再起動しない。で起動したことが原因でしょうか?

関連するQ&A

  • ブルースクリーンになった

    たびたびブルースクリーンになりますが、 今回は *** STOP: 0x0000001D(0xB64F736A,0xBACD79B4,0x00000000) 前回は A problem has been detected and wiondows has been shut to down to prevent damage to your computer. ORQL-NOT-LESS-OR-EQUAL If this si thefirst time you`ve seen this stop error screen, restart your computer. If this screen again,follow these steps: check to meke sure any new hardware or spftware is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components,restart your computer, press F8 to select advanced startup option, and then select safe mode. Technical information: *** STOP: 0x0000000A (0x00000010,0x00000002,0x00000001,0x8051873C) beginning dump of physical memory physical memory dump complete. Contact your system administrator or technical support group for further assistance. 教えてください、お願いします。

  • ブルースクリーン

    A problem has been detected and windows has been shut down to prevent damage to your computer. IRQL_NOT_LESS_OR_EQUAL If this the first time you've seen this stop error screen,restart your computer. If this screen appears again,follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe Mode to remove or disable components,restart your computer,press F8 to select Advaned Startup options,and then select safe Mode. Technical information: *** STOP:0X0000000A(0X00000054,0X00000002,0X00000001,0X804DDC8E) Beginning dump of physical memory physical memory dump complete. contact your system administrator or technical support group for further assistance. 起動したときに上記のように書いてありました。 意味がわかりません・・・

  • パソコンが落ちてブルースクリーンになります。

    いつもお世話になっております。 先日こちらで http://okwave.jp/qa3491081.html http://okwave.jp/qa3501097.html このような症状が出たため、こちらで質問 させて頂きました。 今朝、パソコンを使っていたらブルースク リーンになってしまう状態が出ました。 検索をかけたりしてみたのですが、他の方 とは違う文章でしたので、教えて下さい。 A problem has been detected and Windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again,follow these steps: check to be sure you have adequate disk space.If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. check with your hardware cendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe Mode to remove or disable domponents, restart your comtuter, press F8 to select Advanced startup options, and then select safe Mode. Technical information: ***STOP : 0x0000008E (0xC0000005, 0x805059C1,0xBA5A9748,0x00000000) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technica (すみません、あと少しデジカメ画像からはみ 出ていて分かりません) ビデオカードとか、ハードディスクとか少しは 分かる単語があるのですが、パソコンの事に ついてはまったくの素人ですので、宜しくお願い します。

  • ブルースクリーンが出てしまいます

    youtubuを利用している時に主になります。 以下がブルースクリーンの内容です。 A problem has been detected and windows has been shut down to prevent damage to your computer. IRQL NOT LESS OR EQUAL If this is the first time you've seen this stop error screen,restart your cmputer. If this screen appears again,follow these steps: Check to make sure any new hardware or software is proqerly installed. If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software.Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components,restart your computer,press F8 to select Advanced Startup Options,and then select Safe Mode. Technical information: STOP: 0x0000000A(0x000000D7,0x00000002,0x00000000,0x804ED977) Beginning dump of physical memory Physical memory dump complete. Contact yor system administrator or technical support group for further assistance. Windows XPを使ってます。 このブルースクリーンが出ないようにするには、どうすればいいのか教えてください。よろしくお願いします。

  • ブルースクリーンのエラーメッセージ

    一月に一回程度でPCが突然止まったかと思うとブルースクリーンになり、次のようなエラーメッセージが出ます。 A problem has been detected and windows has been shut down to prevent damage to your computer If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again,follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message,disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components,restert your computer,press F8 to select Advanced startup options, and then select safe mode. Technical information: *** STOP: 0x0000008E (0xC0000005,0x00000000,0xA9721CD4,0x00000000) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further assistance. はっきり言って英語はだめなので何がなにやら・・・・・ 突然なることもありますが、PCでskypeしながらゲームするとよく出ます。 どなたか解決策を教えていただけないでしょうか・・・?

  • ブルースクリーンのエラーメッセージに・・・

    印刷をしようとすると下の様なエラーメッセージが出てしまいます。 いろいろ調べてみたのですが解決法がよくわからず困っています・・ どなたかわかる方お願いします。 A problem has been decated and windows has been shut down to prevent damage to your computer. BUGCODE_USB_DRIVER If this is the first time you`ve seen this stop error screen, restart your computer. If this screen appers again, follow these steps: Check to make sure any new hardware or software is propery installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as catching or shadowing. If you need to use safeMode to remove or disable components, restart your computer, press F8 to select Advanced start up options, and then select safeMode. Technical information Stop:0x000000FE(0x00000005,0xFEBC30E0,0x808624C2,0xFEF4D518) Begining dump of physical memory Physical memory dump complete. Contact your system administrator technical support group for further assistance. です。 情報としては ・Windows XP ・印刷時以外は起こらない よろしくお願いします。

  • ブルースクリーンが出て困っています。

    最近ブルースクリーンが出るようになって困っています。 メッセージは次のとおりです。 A problem has been detected and windows has been shutdown to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps. Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe mode to remove or disable components. restart your computer, press F8 to select Advanced start up options, and then select safe mode. Technical information *** stop:0x0000008E(0x0000005,0xBF80F5E9,0xEC99D068,0x00000000) *** win32k.sys-Adrress BF80F5E9 base at BF800000, Datestamp 43446a58 Beginning dump of Physical memory. Physical memory dump complete. Contact your system administrator or technical support group for further assistance. どのあたりからチェックしていけばいいのでしょうか? ご教授ください PC:NEC VS700/BD  OS:XP sp2 CPU:celeron M 1.3GHz メモリ:512MB×2(バッファロー DD333V)に換装。 HDD:250GB(本体)    300GB(外付 バッファロー HD-H300U2) 以上、よろしくお願いします。

  • ブルースクリーンについて

    質問させていただきます。 alcohol52%をつかってMDSファイルをマウントしたところ、次のようなエラーが起きてしまいました。 A problem has been detected and windows has been shut down to prevent damage to your computer. IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup options, and then select safe made. Technical information: *** STOP: 0x0000000A(0x0000000C,0x00000002,0x00000000,0x804F00B6) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further 自分でもこのエラーについて調べては見たんですが、解決策が見つかりません。 PCはwindowsXPを使っています。 どなたか解決策をお教えいただけたらと思います。 よろしくお願いします。

  • windows7のブルースクリーンで泣きそうです。

    フリーソフトを使いパーテーションを分けようと操作実行した所 いつの間にかブルー画面になってしまいました。 A problem has been detected and windows has been shut down to prevent damage to your computer DRIVER_POWER_STATE_FAILURE If this is the first you've seen this stop error screen,restart your computer. If this screen appears again,follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000009f (0X0000000000000004,0X00000000000000258,0XFFFFFA80036D5050,0XFFFFF80000B9C3D0) Collecting data for crash dump... Initilizing disk for crash dump... Beginning dump of physial memory. Dumping physical memory to disc: 100 Physical memory dump complate. Contact your system admin or technical support group for further assistance. 電源落ちません。どうしたらいいでしょうか?

  • 光学ドライブを使うとブルースクリーンに・・・。

    光学ドライブを使おうとすると、ブルースクリーンになってしまうので困っています。 A problem has been detected and windows has been shut down to prevent damage to your computer. Machine check exception. If this is the first time you are seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing. If you need to use safe Mode to remove or disable components, restart your computer, press F8 to select Advanced startup options, and then select safe mode. Technical information. Stop: 0 ×0000009C (0×00000004,0×8054F5F0,0×B2000000,0×00070F0F) Beginning dump of physical memory physical memory dump complete. Contact your system administrator or technical support group for further assistance. この様な、メッセージが出ます。 ウインドウズを時間を空けて起動してもブルースクリーンになってしまいます。 取り敢えず、光学ドライブを使わなければ、ブルースクリーンにならないのですが、何か、対処の方法は、ないでしょうか? ご教示、よろしくお願いします。