• ベストアンサー

このメッセージの意味は何でしょうか

先日、動画を再生している時と、つい先ほどネットをしている時に、以下のようなメッセージが表示されました。 英語ばかりで意味がわかりません。 A problem has been detected and windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following files. If this is the first time you've seen this stop error screen. restart your computer. If this screen appears again. follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation. ask your hardware or software manufacture for any windows updates you mingt need. If problems continue. disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components. restart your computer. press F8 to select Advanced startup options. and then select Safe Mode. Technical infomation: *** STOP: 0x40000080 (0x8A182AD0.0x89C00B48.0xBACCBD88.0x00000001) これはどういったエラーなのでしょうか? 英語はわかりませんが、3行目をみて「早く電源を切れ」と解釈し、画面を携帯電話のカメラで撮影し、電源ボタンを押して強制終了しました。その写真を見ながらの文章なので、多少誤った箇所もあるかもしれませんが、だいたいはあっていると思います。 動画再生時は、すぐに電源を切ったのでこの通りの文章かどうか、はっきりわかりませんが、同じように英語の文章でブルーバックの画面に切り替わりました。

質問者が選んだベストアンサー

  • ベストアンサー
  • okormazd
  • ベストアンサー率50% (1224/2412)
回答No.2

mingt →might ? こんな訳でしょうか。 問題が発生したので、あなたのコンピュータを被害から守るためにシャツトダウンしました。 問題は次のファイルが原因のように思われます。 このストップエラースクリーンがはじめてだったら、再起動してください。もし、またこのスクリーンになるようなら、次の手順にしたがってください。 新しいハードウェアやソフトウェアが適切にインストールされているかしっかりと確かめてください。 これが新しくインストールされたものなら、あなたが必要とするすべてのウィンドウズ最新版をハードウェア/ソフトウェアメーカーに求めてください。 問題が続くようなら、新しくインストールしたハードウェア/ソフトウェアを無効にするか削除してください。また、BIOSのcachingやshadowingのようなメモリオプションを無効にしてください。 もし、これらのコンポーネントを削除したり無効にするためにセーフモードを使う必要があるなら、高度なスタートアップオプションを起動するためにF8キーを押しながら再起動して、セーフモードを選んでください。 技術情報 *** STOP: 0x40000080 (0x8A182AD0.0x89C00B48.0xBACCBD88.0x00000001)

gongujyoudo
質問者

お礼

丁寧な日本語訳をありがとうございます。 英語には弱いので、あきらかに間違って訳していたことに気が付きました。 ソフトウェアはいろいろとインストールしているので、どれが原因か特定しにくいですが、ハードウェアはHDDを1台増設したのと、グラフィックカードが以前よりゲームをする時に不具合が発生しているので、この2点だと考えています。 ありがとうございました。

gongujyoudo
質問者

補足

最近インストールしたソフトの中で、驚速パソコンがあやしそうだったのでアンインストールしてみました。 その後1週間以上経ちますが、不具合は発生していません。 どうもこのソフトの可能性が高いようです。 回答ありがとうございました。

その他の回答 (1)

  • sicco
  • ベストアンサー率27% (134/486)
回答No.1

これはよくあるエラーなので、文章の内容はそんなに気にしないでください。 なにかのはずみでシャットダウンすることは、どんなPCでもたまにあります。 原因ですが、どうもグラフィックボードが怪しい気がしますね。 ドライバーを最新の物に更新してみてください。

gongujyoudo
質問者

お礼

深夜にも関わらず、回答ありがとうございます。 早速、グラフィックドライバーを更新しました。 これで改善されるか、しばらく見てみたいと思います。 また何かあればよろしくお願いします。

gongujyoudo
質問者

補足

その後、グラフィックドライバーを更新しましたが、同じ症状が発生しました。 それから最近インストールしたソフトの中で一番あやしそうな驚速パソコンを削除してみました。 すると、その後1週間以上経ちましたが、この症状は発生しなくなりました。 回答ありがとうございました。

関連するQ&A

  • エラーメッセージ

    パソコンが勝手に再起動するためシステム設定で自動再起動しないようにしエラーメッセージを確認しました。 以下のようにでるのですがどうしたらいいのでしょうか?? A problem has been detected and windows has been shut down to prevent damage to your conputer. IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your conputer. If this screen appears again, follow these steps; Check to make sure any new hardware or software is properly installed. If this is a nes installation; ask your hardware or software manufacturer for any Windows updates you might need. If problem continue, disable or remove any newly installed hardware or software. Disable BIOS memory option such as caching or shadowing. If you need to use Safe Mode to remove or disable compohents, restart your computer, press F8 to select Advanced Startupp Options, and then select Safe Mode. Technical information; STOP : 0X0000000A(0X00000008,0X00000002,0X00000000,0X804FC99F)

  • エラーメッセージが出たPCを直す方法教えて下さい

    パソコンの電源を入れたら画面が青くなり以下のエラーメッセージが出ました。 A probrem has been detected and windows has been shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME If this is the first time you've seen this stop error screen. restart your computer.If this screen appears again,fllow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable computer,restart your computer,press F8 to select Advanced Start up options,and then select safe mode. Technical infomation: *** STOP : 0x000000ED(0x8129FAF8,0x00000006,0x00000000,0x00000000) 電源を入れなおしても同じエラーが出て使えません。 メーカーに問い合わせたところ、古いパソコンのため、買い換えるしかないと言われました。 今のパソコンには画像や写真が保存してあるので困っています。 どうにか直す方法はないでしょうか? パソコンはTousiba vx/2w15ldstwモデル 型番pavx2w15ldstwです。 回答よろしくお願いします。

  • ブルースクリーンのエラーメッセージに・・・

    印刷をしようとすると下の様なエラーメッセージが出てしまいます。 いろいろ調べてみたのですが解決法がよくわからず困っています・・ どなたかわかる方お願いします。 A problem has been decated and windows has been shut down to prevent damage to your computer. BUGCODE_USB_DRIVER If this is the first time you`ve seen this stop error screen, restart your computer. If this screen appers again, follow these steps: Check to make sure any new hardware or software is propery installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as catching or shadowing. If you need to use safeMode to remove or disable components, restart your computer, press F8 to select Advanced start up options, and then select safeMode. Technical information Stop:0x000000FE(0x00000005,0xFEBC30E0,0x808624C2,0xFEF4D518) Begining dump of physical memory Physical memory dump complete. Contact your system administrator technical support group for further assistance. です。 情報としては ・Windows XP ・印刷時以外は起こらない よろしくお願いします。

  • このブルースクリーンの意味を教えてほしいです。

    OSはwindows vistaです。 自作機で、マザーボードはASUS M2N-E。 CPUはathlon64x2 dualcore 6000+ メモリは3.5GBと認識されています。 はじめて自作したのは、もうとても昔で、6年は自作をはじめてからたっていますが、 ただ、店員さんに薦められたパーツを組み立てただけで、 自作に関しての知識がある状態ではありません。 自分で努力をしたのですが、到底、今の自分の知識ではどうにでもならないので、 こちらで質問をさせて頂きたいです。 どうか宜しくお願いします。 下に、少し長くなってしまいますが、最近表示されたブルースクリーンを、書いてみます。 どこに異常があるか知りたいです。 もう素直に全面的に買い替え、自作をするならきちんと学ぶなどをするしか、 知識のない人間にはどうしようもない状態でしょうか。 (1) 21日16時 ------------- A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: hal.dll IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0xb0b5f7d4, 0x00000002, 0x00000000, 0x81fa75a5) *** hal.dll - Address 0x81fa75a5 base at 0x81fa1000 DateStamp 0x458dfc8e (3) 20日19時 ------------- problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe PAGE_FAULT_IN_NONPAGED_AREA If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x00000050 (0xad10dcb8, 0x00000000, 0x904d7c3c, 0x00000001) *** ntkrnlpa.exe - Address 0x81ca9ff2 base at 0x81c00000 DateStamp 0x4b7d25c9 (3)20日1時 ------------- A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: Ntfs.sys RESOURCE_NOT_OWNED If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x000000e3 (0x852e59b8, 0x85118728, 0x86d73b48, 0x00000003) *** Ntfs.sys - Address 0x826f41e0 base at 0x826bf000 DateStamp 0x4764f079 (4) 19日0時 ---------- A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: aswSnx.SYS ATTEMPTED_WRITE_TO_READONLY_MEMORY If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need 嘆いても仕方がないですが、 とても長い間PCを使っていて、何もわからない自分が情けないです。 どなたか、宜しくお願いします。

  • ブルースクリーンエラー

    少し前に質問させてもらったのですが、やはりまだ頻繁にでるので質問させてください。 ログをとったので対処法を教えてもらえないでしょうか? よろしくお願いします PAGE_FAULT_IN_NONPAGAED_AREA If this is the first time you're seen this stop error screen,restart your computer,If this screen appears again,fallow these steps: check to make sure any new hardware or software is properly installed. Ifthis is a new istallation,ask yore hardware or software manufacturer for any windows updates you mightneed. If problems continue,disable or remore any newly installed hardware or software,Disable BIOS memory options such as caching or shadowing. If you need touse sofeMode to remove or disable components,restart your computer,press F8 to select Advanced startup options,and then select safeMode. Technical in for mationi *** Stop:0x00000050(0xBAO0154,040000000,0x8058388F,0x00000000)

  • たまに出るブルースクリーンのエラーメッセージ

    長時間ネットゲームをした時によく出るエラーメッセージなのですが、 どういうことが書いてあるのか教えてください 画面はブルースクリーンです PCはDimention9150です A ploblem has been and windows has been shut down to prevent damage to your computer. KERNEL_DATA_INPAGE_ERROR If this is the first time you`ve seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or softwaremanufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, pless F8 to select Advanced Startup Options, and then select Safe Mode. Technical information: **** STOP : 0x0000007A(0xE1DEC7A0,0x0000056,0xBF8EB50B,0x2C9CE860) *** win32k,sys - address BF8EB50B base at BF800000. Datestamp 4a8564c7 Beginnig dump of physical memory 写し間違えしてるかも知れません・・・

  • PCが立ち上がらなくなってしまい、困っています2

    先日ブルースクリーン?で困って質問した者です。 英字の内容を書きます。この場合、直るでしょうか? A problem has been detected and windows has been shut down to provent damage to your computer. UNMOUNTABLE_BOOT_VOLME If this is the first time you've seen this stop errer screen, restart your computer.If this screen appears again,follw these steps:check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows up dates you might need. If problems continue,disable or remove any newly installed hardware or software.Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components,restart your computer,press F8 to select Adovanced start up options,and ther select safe mode. Technical information:STOP:0x000000ED(0x865C5C08,0x0000006,0x00000000,0x00000000)

  • ブルースクリーン現象になりました

    質問をさしてもらい ブルースクリーン現象ということが分かり (対処の仕方がわかりません) BlueScreenView を使い (何個かありましたが数が多かったので何個かはりました) ブルースクリーンのところを抜き出してみました ハードディスクのバックアップはとらなくても大丈夫でしょうか A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x9589a9b8, 0x00000002, 0x00000000, 0x82ebb60b) *** ntkrnlpa.exe - Address 0x82e4ffd9 base at 0x82e02000 DateStamp 0x4cb710d6 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x00000000, 0x0000001b, 0x00000000, 0x82e95c94) *** ntkrnlpa.exe - Address 0x82e9bfd9 base at 0x82e4e000 DateStamp 0x4cb710d6 三つめ A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe CACHE_MANAGER If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information:

  • 異音がして英文のメッセージが・・故障なのか不安です。

    突然ハードから『コトコト』とゆうか『カタカタ』と異音がなり始め、しばらくすると画面が真っ黒になり、下記のようなメッセージが表示され、止まります。 打ってみましたが少々写し間違いがあるかもしれませんが、対処の仕方が解る方がいましたら教えてください。 ↓ A problem has been detected and windows has been shut down to prevent damage to your computer. kernel date inpage error If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again,follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software monufacturer for any windows updates you miht need. If problems continue,disable or remove any newly installed hardware or software,Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components,restart your computer,press F8 to select Advanced startup options,and then select safe mode. Technical information: STOP:0x0000007A(0xC07C2450,0xC000000E,0xF848A000,0x08FE7860) MountMgr.sys-Address F848A000 base at F8485000,Date Stamp 41107b05 Beginning dump of physical memory.

  • パソコンで青い画面

    パソコンで青い画面になってしまい。次のようなメッセージです どこがおかしいのか さっぱりわかりません。ご指導宜しくお願いします。 初心者ですので 可能な限り手順も教えてください。 A problemhas been detectedand windows has been shut down to prevent dama to your computer. MACHINE_CHECK_EXCEPION if this is the first time you've seen this stop error screen. restart your computer. If this screen appears again,follow these steps: check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware of software.Disable BIOS memore options such as caching or shadowing If you need to use safe mode to remove or disable components restart select safe mode. Technical information *** STOP:0x0000009C(0X00000004,0X80548EF0,0x82000000,0X00070F0F) Beginning dump of physical memory