• 締切済み

ＯＳインストール中のエラー

Ｗｉｎｄｏｗｓ ＸＰのインストール中に青画面になり ＯＳのインストールが途中で止まってしまいます。 最初は正常にインストール出来たのですが ＨＤＤをフォーマットしている時に電源を落としてしまいました。 Ｗｉｎｄｏｗｓ起動した後に青画面になる事から 再度ＯＳを入れ直しにかかったものです。 （現在はＷｉｎｄｏｗｓ起動しません） どなたか原因と対処法が解ればご助言下さい。 A prpblem has been detected and Windows has been shut down to prevent damage to your computer. PAGE_FAULT_IN_NONPAFED_AREA If this is the first time you've seen this stop error screen, restart your computer. If this screen. appears again, follow these steps: Check to make sure any new hardware of software is propely installed, If this is a new installation, ask your hardware of software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe Mode to remove or disable components, restart your computer,press F8 to select Advanced startup options, and then select Safe mode. Technical information: STOP:0X00000050(0XE52c5A0c,0X00000000,0X8041E022,0X00000002)

みんなの回答

  • ddmat312
  • ベストアンサー率32% (20/62)
回答No.1

http://orbit.cocolog-nifty.com/supportdiary/2005/09/stop0x00000050_e7fe.html

参考URL：
http://orbit.cocolog-nifty.com/supportdiary/2005/09/stop0x00000050_e7fe.html
Sexual
質問者

補足

すみませんＦＤ積んでません。

  1. カテゴリ
  2. [技術者向] コンピューター
  3. OS（技術者向け）
  4. Windows系OS

関連するQ&A

  • WindowsXPのクリーンインストールが出来ない。

    　Windowsをクリーンインストールしようとしたのですが、 A problem has been detected and windows has been shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new harfware or softwareis properly installed. If this is a new installation, ask your hardware or software marufacturer for any windows updates you might need. If problems continue, disable or remove any rewly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Safe Mode. Technical information: *** STOP: 0x000000ED (0x8474c468, 0x00000000, 0x00000000) と、表示されてセットアップ画面にいきません。

  • ブルースクリーンエラー

    少し前に質問させてもらったのですが、やはりまだ頻繁にでるので質問させてください。 ログをとったので対処法を教えてもらえないでしょうか？ よろしくお願いします PAGE_FAULT_IN_NONPAGAED_AREA If this is the first time you're seen this stop error screen,restart your computer,If this screen appears again,fallow these steps: check to make sure any new hardware or software is properly installed. Ifthis is a new istallation,ask yore hardware or software manufacturer for any windows updates you mightneed. If problems continue,disable or remore any newly installed hardware or software,Disable BIOS memory options such as caching or shadowing. If you need touse sofeMode to remove or disable components,restart your computer,press F8 to select Advanced startup options,and then select safeMode. Technical in for mationi *** Stop:0x00000050(0xBAO0154,040000000,0x8058388F,0x00000000)

  • ブルー画面エラー

    このような画面がでてしまいました。 どうすればよいのでしょうか。 よろしくお願いします。 a problem has been detected and windows has been shut down to prevent damage to your computer. page_fault_nonpaged_area if this is the first time you've seen this stop error screen, restart your computer. if this screen appears again, follow these steps: check to make shre any new hardware or software is properly installed. if this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. if problems continue, disable or remove any newly installed hardware or software. disable bios memory options such as caching or shadowing. if you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select safe mode. technical information: stop: 0x00000050 (0xE14D4810,0x00000000,0x8055259a,0x00000001) Beginning dump of physical memory dumping physical memory to disk: 24

  • このようなエラーがでて困っています

    A problem has been delected and windows has been shut down to prevent damage to your computer. IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer.If this screen appears again,follow thiese steps: Check to make sure any new haedware or software is properly installed. If this is a new installation,ask your hardware or software manu facturer for any windows updates you might need. If problem continue disable or remove any newly installed hardware or software,Disable BIOS memory options such as caching or shadowing If you need to use safe mode to remove or disable computers,restart your Computer,press F8 to select Advanced start up options,and then select safe mode. Technical information: ☆☆☆ STOP:0x0000000A(0x00000000,0x0000001c,0x804FCEE4) Beginning dump of phy sical memory. Physical memory dump complete Contaet your system administrater or technieal support group for further assistance というエラーです。解決方法または出なくなる方法を教えてください

  • OSのクリーンインストールが出来ない

    非常に困ってます、どなたかアドバイスをお願いいたします。当方DELL　Dimension　XPS　GEN4　を使用していますが、ブルーバックが出てOSの再インストールも出来ない状態です。 A problem has been deteckted and windows has been shutdown to prevent damage to your computer. IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen,restart your computer,If this screen appears again,follow these step: Check to make sure any new hardware or software is properly installed.If this is a new installation,ask your hardware or software manufacture for any windows update you might need. If problem continue,distable or remove any newly installed hardware or software. Disable BIOS memory option such as caching or shdowing. If you need to use safemode to remove or disable components, restart your computer, press F8 to select Advanced startup options, and then select safemode. Technical information: Stop:0x0000000A(0x3F003F00,0x00000002,0x00000001,0x804EE652) Beginning dump of physical memory Physical memory dump complete. contact your system administrator or technical support group for further assistance. と表示が出てきます。この教えてgooでも似たような質問を参考にしましたが、復帰できません。 因みに、いままで試したことは、まず増設メモリーをはずし元から付いていたメモリーを他のPCにてチェックしたところ問題なしでした。 クリーンインストールを試してみると、OSのCDからブートし最初は読み込むのですが、しばらくするとまた上記のようなブルーバックになります。したがってOSのインストールまで進めません。どなたかアドバイスお願いいたします。

  • インストールできない

    いろいろあってｐｃのデータをすべて消去してしまったので新たにwindows2000（製品版）をインストールしたらこんな画面になったのですがどうすればいいのでしょうか？ 以前からいつもインストールの途中でフリーズしてちゃんとインストールできた試しがありません。どうかよろしくお願いします。 *** STOP : 0x0000000A (0xC182DFE8,0x00000002,0x00000001,0x80445492)IRQI._NOT_LESS_OR_EQUAL *** Address 80445492 base at 80400000, DateStamp 384d9b17 - ntoskrnl.exe If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check to male sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows 2000 updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. Check your hard drive to make sure it is properly configured and terminated. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Refer to your Getting Started manual for more information on troubleshooting Stop errors.

  • エラーメッセージ

    パソコンが勝手に再起動するためシステム設定で自動再起動しないようにしエラーメッセージを確認しました。 以下のようにでるのですがどうしたらいいのでしょうか？？ A　problem has been detected and windows has been shut down to prevent damage to your conputer. IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your conputer. If this screen appears again, follow these steps; Check to make sure any new hardware or software is properly installed. If this is a nes installation; ask your hardware or software manufacturer for any Windows updates you might need. If problem continue, disable or remove any newly installed hardware or software. Disable BIOS memory option such as caching or shadowing. If you need to use Safe Mode to remove or disable compohents, restart your computer, press F8 to select Advanced Startupp Options, and then select Safe Mode. Technical information; STOP : 0X0000000A(0X00000008,0X00000002,0X00000000,0X804FC99F)

  • エラーメッセージが出たPCを直す方法教えて下さい

    パソコンの電源を入れたら画面が青くなり以下のエラーメッセージが出ました。 A probrem has been detected and windows has been shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME If this is the first time you've seen this stop error screen. restart your computer.If this screen appears again,fllow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable computer,restart your computer,press F8 to select Advanced Start up options,and then select safe mode. Technical infomation: *** STOP : 0x000000ED(0x8129FAF8,0x00000006,0x00000000,0x00000000) 電源を入れなおしても同じエラーが出て使えません。 メーカーに問い合わせたところ、古いパソコンのため、買い換えるしかないと言われました。 今のパソコンには画像や写真が保存してあるので困っています。 どうにか直す方法はないでしょうか？ パソコンはTousiba vx/2w15ldstwモデル 型番pavx2w15ldstwです。 回答よろしくお願いします。

  • ブルー画面のエラーで先に進みません

    ブルー画面で下のようなエラーが出ます。エラーの意味と対処法を教えて下さい。（セーフモードでも起動不可能でした） A problem has been detected and windows has been shut down to prevent damage to your computer.UNMOUNTABLE_BOOT_VOLUME If this screen appears again,follow these steps;Check to make sure any new hardware or software is properly installed.If this is a new installation,ask your hardware or software manufacturer for any waindows updates you might need.If problem continue,disable or remove any newly installed hardware or software.Disable BIOS memory options such as caching or shadowing.If you need touse Safe Mode to remove or disable components,restart your computer,press F8 to select Advanced Startup Options,and then select Safe Mode. Technical Information;***STOP:0x00000ED(0x80EB33C8,0xC0000032,0x00000000)

  • stop: 0X0000006f エラーが出ました

    A problem has been detected and windows has been shut down to prevent damage to your computer. SESSION3_INITIALIZATION_FAILED If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears agin, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical information: ***STOP: 0x0000006F (0x0000020, 0x00000000, 0x00000000, 0x00000000) 昨夜まではちゃんと動いてたんですけど 最近 起動 シャットダウン が若干遅くなっていたような気はします。 青い画面の英文を写し取ってる間中 スピーカーからカサカサと雑音が聞こえていました。 考えられる原因をお願いします。　m(__)m dynabook Satellite J31 Win.XP Pro （※EVEREST Home のセンサーで内部温度は40℃程度です） 　別ＰＣからの掲載です 　情報が不足の場合、即時追加させていただきます。

注目のQ&A

カテゴリ

専門家に質問してみよう

職業から探して質問する

あなたにピッタリな商品が見つかる！ OKWAVEセレクト

質問する