dvipdfmxで作ったpdfファイルがWindowsで読めません
- Vine LinuxでTeXを使って文書を書いているのですが、dvipdfmxでpdfファイルに変換した際、Windows版のAcrobat Reader7.0で読み込むとエラーが出ます。
- 検索結果からフォントの問題が原因と考えられます。
- Linuxで作成したpdfファイルをWindowsで正常に読み込む方法を教えてください。
- ベストアンサー
dvipdfmxで作ったpdfファイルがWindowsで読めません
はじめまして。 Vine LinuxでTeXを使って文書を書いているのですが、コンパイルしてできたdviファイルをdvipdfmxでpdfファイルに変換したとき、Linuxのxpdfでは正常に読めるのですがWindows版のAcrobat Reader7.0で読み込むと、エラー117や111が出ます。 いろいろ検索してみてフォントの問題かと思うのですが・・・ 以下にLaTeXのバージョンをコピーしておきます。 pTeX (Web2C 7.4.5) 3.14159-p3.1.3 (EUC) kpathsea version 3.4.5 Copyright (C) 1999 D.E. Knuth. Kpathsea is copyright (C) 1999 Free Software Foundation, Inc. There is NO warranty. Redistribution of this software is covered by the terms of both the pTeX copyright and the GNU General Public License. For more information about these matters, see the files named COPYING and the pTeX source. Primary author of TeX: D.E. Knuth. Kpathsea written by Karl Berry and others. dvipdfmxのバージョンも貼っておきます。 This is dvipdfmx-20040411 by the DVIPDFMx project team, an extended version of dvipdfm-0.13.2c developed by Mark A. Wicks. LinuxでつくったpdfをWindowsで正常に読み込めるようにするにはどうしたらいいのでしょうか。どうかご教授願います。
- Pgoie
- お礼率40% (2/5)
- その他([技術者向] コンピューター)
- 回答数1
- ありがとう数1
- みんなの回答 (1)
- 専門家の回答
質問者が選んだベストアンサー
フォントを埋め込んだPDFファイルを作成すればいいのではないでしょうか? 個人的にはTex等を使用しなくなってだいぶ経つのでアドバイスできませんが、以下のページが参考になるのではないかと思います。 ○TeX Wiki PDFの作り方:dvipdfm/dvipdfmx の使い方 http://oku.edu.mie-u.ac.jp/~okumura/texwiki/?PDF%E3%81%AE%E4%BD%9C%E3%82%8A%E6%96%B9#content_1_10 ○fuga's Wiki dvipdfmx:dvipdfmxで東風フォントを埋め込む方法 http://fuga.jp/~densuke/hiki/hiki.cgi?dvipdfmx
関連するQ&A
- LaTeXからpdfへ
LaTeXで作った資料をpdfに変換したいです. LaTeXで作ったときにdviファイルができ,それを「dvipdfmx ○○」と,コマンドプロンプトで変換したら,画像が表示されませんでした. psファイルに一度変換させようとしたら,このようなエラーが出ました(ファイル名はtest1). This is dvips(k) 5.94a Copyright 2003 Radical Eye Software (www.radicaleye.com) ' TeX output 2006.12.13:0052' -> test1.ps dvips: ! Bad VF file jis.vf: character code out of range どうしたらエラーが直るか教えてください
- 締切済み
- フリーウェア・フリーソフト
- texファイルをgui-shellでコンパイルすると「I can't find the format file `platex.fmt'!」が!
Win2kのc:\ptex下にインストールしました。 Gui-ShellVersion1.39、dviout for Windows3.11.4を使用しています。 最近に急にコンパイルトラブルで困っています。 %hoge.tex \documentclass[a4paper,10pt]{jbook} \begin{document} hogehoge \end{document} を実験的にコンパイルしようと [スタート] ↓ [プログラム] ↓ [ptex2.1.8] ↓ [guishell] を開いて、 [ファイル(F)] ↓ [開く(O)] で e:\foo\hoge.tex を指定してコンパイルすると 「This is GUI-Shell Version1.39,Copyright(C) 1996-2000 by Yoshiki OTOBE. All rights reserved. GUI-Shell Message(command): platex.exe hoge.tex This is pTeX,Version p2.1.8,based on TeX,Version 3.14159(SJIS)(Web2C 7.2) I can't find the format file `platex.fmt'!」 となってしまいます。 Proccess Terminated.ダイアログボックスが現れ、 「Processing the file command. If you want to see error/warining information,press [INFO] button.」 [INFO]ボタンをクリックすると 「Your sorce file is perfect (no error and warning)or the last processed file is not TeX source.」 これは何が原因なのでしょうか? 因みに Gui-Shellの[オプション(O)] ↓ [Gui-Shellの一般的動作設定] ↓ [PATHの確認] では C:\cygwin\bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\masm32\bi n;C: \masm32\lsic330c\BIN;C:\cygwin\old_borland\bcc55\Bin;.\;C:\cygwin\gcc\GDS2K1 ~1\g ds2k\BIN;""; となっています。 ツヅキアリ
- ベストアンサー
- その他(ソフトウェア)
- TeXから作ったPDFからテキストをコピーしたいです。
TeXから作ったPDFからテキストをコピーしたいです。 MacPortsを使いpTeXをインストールして使っています。 今日まで気づかなかったのですが、PDFを作成した際にPDF上からテキストをコピーできません。 私はてっきりテキストファイルから作成しているし、テキストをコピーできると思っていたのですができないのでしょうか? dvipdfmxで作成しても、PSファイルを作成してDistillerを使いPDFを作成してもテキストは抜けるようです。 本日は晴天なり のような文章だと 本 晴 なり のように抜けます。 もし何かの方法でコピーできる方法があれば教えてください。
- ベストアンサー
- Mac
- texのエラー ファイルが見つけられない
texでファイルをコンパイルしようとすると以下のようなエラーが出ます。 This is pTeX, Version 3.1415926-p3.1.11 (sjis) (Web2C 2009) restricted \write18 enabled. ! I can't find the file '***.tex'. (Press Enter to retry, or Control -Z to exit) Please type another input file name: 実際***(ファイルの名前).texは存在するし、名前の入力は間違っていないのですが、texがファイルを見つけることができないようなのです。 何か解決策があれば教えてください!!
- 締切済み
- フリーウェア・フリーソフト
- texshopについて 2
さきほどtexshopについて質問をしたものです。 http://oshiete1.goo.ne.jp/qa4421753.html 指示の通り施してみましたが、以下のようになってしまいます。 どなたか解決策を教えていただけないでしょうか??? ### platex a.tex This is pTeX, Version 3.141592-p3.1.10 (utf8) (Web2C 7.5.4) (./a.tex pLaTeX2e <2006/01/04>+0 (based on LaTeX2e <2005/12/01> patch level 0) (/usr/local/teTeX/share/texmf/ptex/platex/base/jarticle.cls Document Class: jarticle 2002/04/09 v1.4 Standard pLaTeX class (/usr/local/teTeX/share/texmf/ptex/platex/base/jsize10.clo)) ! LaTeX Error: File `jtygm.sty' not found. Type X to quit or <RETURN> to proceed, or enter new name. (Default extension: sty) Enter file name: (./a.aux) [1] (./a.aux) ) Output written on a.dvi (1 page, 228 bytes). Transcript written on a.log. ### dvipdfmx a.dvi a.dvi -> a.pdf [1 ** WARNING ** Could not locate a virtual/physical font for TFM "rml". ** WARNING ** >> This font is mapped to a physical font "HiraMinPro-W3". ** WARNING ** >> Please check if kpathsea library can find this font: HiraMinPro-W3 ** ERROR ** Cannot proceed without .vf or "physical" font for PDF output... Output file removed. ### dvipdfmx error
- ベストアンサー
- Mac
- texshopについて
Mac OS XにTexshopをインストールしました。 英字はpdfにできるのですが、日本語を入力するとコンパイルできません。 なぜでしょうか??? ### platex tex.tex This is pTeX, Version 3.141592-p3.1.10 (utf8) (Web2C 7.5.4) (./tex.tex pLaTeX2e <2006/01/04>+0 (based on LaTeX2e <2005/12/01> patch level 0) (/usr/local/teTeX/share/texmf-local/tex/latex/base/book.cls Document Class: book 2005/09/16 v1.4f Standard LaTeX document class (/usr/local/teTeX/share/texmf-local/tex/latex/base/bk10.clo)) (./tex.aux) LaTeX Font Warning: Font shape `JT1/mc/m/sl' undefined (Font) using `JT1/mc/m/n' instead on input line 7. LaTeX Font Warning: Font shape `JY1/mc/m/sl' undefined (Font) using `JY1/mc/m/n' instead on input line 7. [1] (./tex.aux) LaTeX Font Warning: Some font shapes were not available, defaults substituted. ) Output written on tex.dvi (1 page, 272 bytes). Transcript written on tex.log. ### dvipdfmx tex.dvi tex.dvi -> tex.pdf [1 ** WARNING ** Could not locate a virtual/physical font for TFM "rml". ** WARNING ** >> This font is mapped to a physical font "HiraMinPro-W3". ** WARNING ** >> Please check if kpathsea library can find this font: HiraMinPro-W3 ** ERROR ** Cannot proceed without .vf or "physical" font for PDF output... Output file removed. ### dvipdfmx error
- ベストアンサー
- Mac
- dvipdfmによるDVI→PDFの変換
WindowsXP上にてdvipdfmを利用してDVI→PDFの変換を試みていますが、上手くいきません。 dvipdfmを走らせ変換を行おうとすると、あるファイルでは、以下のようなエラーが出、 sampleH.dvi -> sampleH.pdf [1 Can't find or open encoding file: cmtext また、別のファイルでは、以下のエラーが出ました。 C:\texdoc\book\base.dvi -> base.pdf [1Unrecognized special ignored Current input buffer is -->color push Black<-- Unrecognized special ignored Current input buffer is -->color pop<-- Unrecognized special ignored Current input buffer is -->color push Black<-- Unrecognized special ignored Current input buffer is -->color pop<-- tfm_open: Something is wrong. Are you sure this is a valid TFM file? TeXの入っていた書籍が古いためdvipdfmは別途にダウンロードしインストールしました。 また、変換しようとしているファイルは、参考書を作成しようとしている日本語ファイルです。 いろいろなページを回りましたが、エラーの対処法は見つけられませんでした。 何が原因なのか教えていただけたらと思います。 ※シェアのPDF作成ソフトを使ったところ容量が2MBを越えるなど、実用に耐えなかったので。。。
- ベストアンサー
- その他(ソフトウェア)
- dvi → pdf
texでDVIファイルをPDFファイルに変換したくて、 dvipdfm test.dvi を実行しました。 しかし、画像が表示されません。 どのようにしたらいいのでしょうか。 エラー文は以下のようにでます。。 pdf: image inclusion failed for (test.eps). ][35(./test.eps<PS>'gswin32c' は、内部コマンドまたは外部コマンド、操作可能なプログラムまたはバッチ ファイルとして認識されていません。 どうかよろしくおねがいします。
- ベストアンサー
- その他([技術者向] コンピューター)
- Latexの画像取り込みのエラー
Latexの画像取り込みのエラー タイトル通り画像を取り込もうとするとエラーが出ます。 エラー結果はこの通りです。 %% This is file `.tex', %% generated with the docstrip utility. %% %% The original source files were: %% %% fileerr.dtx (with options: `return') %% %% This is a generated file. %% %% Copyright 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 %% The LaTeX3 Project and any individual authors listed elsewhere %% in this file. %% %% This file was generated from file(s) of the Standard LaTeX `Tools Bundle'. %% -------------------------------------------------------------------------- %% %% It may be distributed and/or modified under the %% conditions of the LaTeX Project Public License, either version 1.3b %% of this license or (at your option) any later version. %% The latest version of this license is in %% http://www.latex-project.org/lppl.txt %% and version 1.3b or later is part of all distributions of LaTeX %% version 2005/12/01 or later. %% %% This file may only be distributed together with a copy of the LaTeX %% `Tools Bundle'. You may however distribute the LaTeX `Tools Bundle' %% without such generated files. %% %% The list of all files belonging to the LaTeX `Tools Bundle' is %% given in the file `manifest.txt'. %% \message{File ignored} \endinput %% %% End of file `.tex'. これはどういうことなんでしょうか?最新のバージョンに変えろってことでしょうか? お願いします。 ちなみに以下のようにコーディングしました。 \documentclass{jsarticle} \usepackage[dvipdfmx]{graphicx} \begin{document} \begin{center} \includegraphics[width=5cm,clip]{tiger.eps}\\ Ghostscriptの虎 \end{center} \end{document}
- ベストアンサー
- その他([技術者向] コンピューター)
お礼
ご回答ありがとうございます。参考にしてみます。