• 締切済み

os再インストールエラー

a problem has been deted and windows has been shut down to prevent damage to your computer. if this is the time you've seen this stop error screen,restart your compur.if thisbscreeb appears again ,follow these steps: check to be sure you have adequate disk space.if a driver is identified in the stopmessage, disable the driver or check with the maufacturer for driver updates.try chaning vueo adapters. check with your hardware vendor for any BIOS updates.disable BIOS memory options such as caching or shadowing if you need to use safe mode to remove or disable components, restart your computer, presss f8 toselec advanced statup options,and then select safe mode. technical infomation: stop:0*00000007E(0*c0000005, 0*75560BF,0*F79A2208,0*F79A1F08) pci.sys-address f75560BF base at F754F000,datestamp 3b7d855c とのメッセージが出ます。 今回自作製作です。BIOS画面問題なくいきますハードディスク、ドライブも認識してます。ぜひ、教えてください

みんなの回答

  • shogo0809
  • ベストアンサー率47% (25/53)
回答No.1

この内容では答えようがないので、補足をお願いします。 「再インストール」とありますが 1. PCを以前製作し、今回はOSの再インストールのみをしたい 2. PCを今回製作し、一度OSが動いたが何らかの理由でOSを再インストールしたい 3. PCを今回製作し、OSを何度か入れ直しているが全く動かない のどれでしょうか、またはもっと別のシチュエーションですか? メッセージはPC起動時のどのタイミングで出るんでしょうか。 また直前のパーツ追加等、思い当たる節はまったくありませんか? さらに、メッセージ内容も正確とは思えません。明らかにおかしい箇所がいくつもあります。 英文ですが、ご自分で読まれようとはしたのでしょうか? 最後に、自作PCであればパーツ構成も併記していただかないと答えるのは難しいです。

関連するQ&A

  • エラーメッセージ

    ちょっと長くなりますがエラーメッセージを書くので対処方法を教えてください。 A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these stops. Check to be sure you have adequate disc space. If a drive is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any Bios updates. disable BIOS memory options such as caching or shadowing. if you need to uses safe Mode to remove or disable components, restart your computer, prees F8 to select Advanced startup options, and the select safe mode. このメッセージが出て勝手にwindowsが再起動します。 何が原因でしょうか?

  • OSを入れようとしたらブルースクリーンが

    こんにちは、先日どすパラにてOSインストールなしのパソコンを購入したのですが、OSを入れようとするとブルースクリーンが出てきてインストールが出来ません。エラーメッセージは A problem has been detected and windows has been shut down to prevent damege to your computer . If this is the first time you've seen this stop error screen,restart your computer . If this screen appear agein,follow these steps: Check to be sure you have adequate disk space .If a driver is identified in the stop message ,disable the driver or check with the manufacturer for driver updates.Try cganging video adapters. Check with your hardware vendor for any BIOS updates.Disable BIOS memory options such as caching or shadowing .If you need to use safe Mode to remove or disable components ,restart your computer,press F8 to select advancedstartup Optios,and then select safe Mode. Technical information: STOP:0x0000007E (0xC0000005,0xF748E0BF,0xF78DA208,0xF78D9F08) pci.sys - Address F748E0BF base at F7487000,DateStamp 3b7d855c 以上です。どなたかお力添えお願いします。

  • OSのインストール時に出るメッセージ

    既出トピックでしたらすみません。 先日新しいパソコン(OSなし)を購入しました。 インストールしようとしたところ、セットアップが始まった後に以下のメッセージが出てしまいます。 サポートセンターにも問い合わせましたが故障ではないとの返答でした。 勉強不足かもしれませんが、ご教授ください。 【以下メッセージ】 A problem has been detected and windows has been shut down to prerent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any BIOS updatet. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Option, and then select Safe Mode.

  • os無しで購入したpcにosインストールができない

    パソコン工房でos無しのパソコンを購入しosのイントールを試みたところ、インストールの途中でエラーが表示され途中でとまってしまいました。(エラー内容はかなり長文のため一番下に記載します。) cdを挿入すれば普通にインストールが完了すると思っていたのですが何か設定が必要なのでしょうか? biosにはハードディスクが認識されていました。容量は250Gです ざっと見たところbios自身のアップデータが必要?のようですがその方法もわかりません フロッピードライブもついてないのですがアップデートは可能なのでしょうか? どうぞよろしくお願い致します。 ブルーバックでのエラーメッセージ A problem has been detected and Windows has been shut down to prevent damage to you computer. If this is the first time you've seen this Stop error screen,restart your computer. If this screen appears again, follow these steps: check to be sure you have adequate disk space. if a driver is identified tin the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for anya BIOS updates. Disable BIOS memory options such as caching or shadowing. if you need to use safe mode to remove or disable components, resatart your computer, press F8 to select advanced Startup options, and then select safe mode. Technical information: ***STOP: 0x0000007E... *** pci.sys - address....

  • OSインストール中のエラー

    Windows XPのインストール中に青画面になり OSのインストールが途中で止まってしまいます。 最初は正常にインストール出来たのですが HDDをフォーマットしている時に電源を落としてしまいました。 Windows起動した後に青画面になる事から 再度OSを入れ直しにかかったものです。 (現在はWindows起動しません) どなたか原因と対処法が解ればご助言下さい。 A prpblem has been detected and Windows has been shut down to prevent damage to your computer. PAGE_FAULT_IN_NONPAFED_AREA If this is the first time you've seen this stop error screen, restart your computer. If this screen. appears again, follow these steps: Check to make sure any new hardware of software is propely installed, If this is a new installation, ask your hardware of software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe Mode to remove or disable components, restart your computer,press F8 to select Advanced startup options, and then select Safe mode. Technical information: STOP:0X00000050(0XE52c5A0c,0X00000000,0X8041E022,0X00000002)

  • 起動ディスクを入れるとエラーが起きます

    起動ディスクを1~6を入れて6枚目を入れると 青画面になってこういうメッセージが出ます。 BIOSを更新した方がいいのでしょうか? 知識不足なので分かる方教えてください。 A problem has been detected and windows has been shut down to prevent damage to your computer. IF this is the first time you've seen this stop error screen, restart your computer.If this screen appears again, follow these steps: Check to be sure you have adequte disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any BIOS updates.Disable BIOS memory options such as caching or shadwing.If you need to use Safe Mode to remove or disable components,restart your computer,press F8 to select Advanced Stratup Options,and then select Safe Mode. STOP:0x000007E(0xc0000005,0xF7768DCE,0xF7C7903C,0xF7C78038) acpi.sys - Address F7768DCE base at F7754000,DateStamp 41107d27

  • エラーメッセージ

    パソコンを使用中に背景が真っ青になって 下記のようなメッセージが出てきたのですが、 何をすれば良いのかわからず対応できません。 どうやって対処すればいいのでしょうか? これが出てきたメッセージです。 A problam has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again,follow these steps: check to be sure you have adequate disk space. If a driver is identified in the stop message,disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to nse safe Mode to remove or disable components. restart your computer,press F8 to select Advanced Start up options,and thenselect safe mode Technical information: STOP:0x0000008E(0xoooooo5,0x8058E8ED,0xF34B3C8C,0x00000000) Beginning dump of phisical memory

  • windowsXPインストール途中でエラー?なぜ?

    こんにちは、先日NEC VersaPro PC-VA65H(B5サイズ)を購入。このbookには、cdドライブがありません。で、USBCDドライブをつけて起動。XPをインストールしようと、はじめましたがインストール途中のファイルを集めているところで、再試行とでて、boot○○.bllかな?でこのエラーが出てしまい。続けると、、、 if this is the first time you've seen this stop errer screen, restart your computer .if this screen appears again,follow there steps: chek to be sure you have adequate disk space. if a driver is identified in the stop massage, disable the driver or check with the manufacturer for driver updates. try changing video adapters. check with your hardware vendor fou any BIOS updaters.disable BIOS memory options such as caching or shadowing, if you need to use safe mode to remove or disable components,restart your computer,press F8 to select advanced startup options.and then select safe mode. と表示されます。 で、とりあえずドライブを別のやつを取り付けてインストールしようとしましたが、やはり同じところで止まります。 解決方法ご存知の方は、よろしくアドバイスお願いいたします。

  • 再インストール

    パソコンに電源を入れたまま、少し放っておくとブルーバックになってフリーズしてしまいます。 そのため、OSを再インストールしようとしているのですが、VISTAのロムをセットして電源を入れて、画面下にWINDOWSのバーが動いた後、ブルーバックになります。 内容は、 A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced startup Options, and then select Safe Mode. Technical infomation: *** STOP: 0x0000008E (0xc0000005,0x89168c15,0x808030D4,0x0000000) と、出ております どうすれば再インストールできるのでしょうか?

  • Windows再インストール中に下記メッセージが表示され、止まってしま

    Windows再インストール中に下記メッセージが表示され、止まってしまいます。何度やってもこのメッセージが表示されます。USBの周辺機器(カードリーダー、デジカメ、プリンター)も抜きました。どうしたらよいでしょうか? A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen,restart your computer.If this screen appears again,follow these steps; Check to be sure you have adequate disk space.If a driver is identified in the stop messeage,disable the driver or check with the manufacturer for driver updates.Try changing video adapters. Check with your hardware vendor for any BIOS updates.Disable BIOS memory options such as caching or shadowing.If you need to use same mode to remove or disable components,restart your computer,press F8 to select Advanced startup options,and then select Safe Mode. Technical information ***STOP:0x0000007E (0xc0000005s,0xF748E0BF,0xF780a208,0xF7809F08) ** pci.sys - Address F748E0BF base at F7487000, DateStamp 3b7d855c