- ベストアンサー
Windows再インストール中にエラーメッセージが表示される
- Windows再インストール中にエラーメッセージが表示され、作業が停止してしまいます。
- USBの周辺機器(カードリーダー、デジカメ、プリンター)を抜いてもエラーメッセージが表示され続けます。
- 解決方法として、ディスクスペースの確認、ドライバの無効化または更新、ビデオアダプタの変更、BIOSのアップデートを試すことが挙げられます。
- みんなの回答 (1)
- 専門家の回答
質問者が選んだベストアンサー
関連するQ&A
- エラーメッセージ
パソコンを使用中に背景が真っ青になって 下記のようなメッセージが出てきたのですが、 何をすれば良いのかわからず対応できません。 どうやって対処すればいいのでしょうか? これが出てきたメッセージです。 A problam has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again,follow these steps: check to be sure you have adequate disk space. If a driver is identified in the stop message,disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to nse safe Mode to remove or disable components. restart your computer,press F8 to select Advanced Start up options,and thenselect safe mode Technical information: STOP:0x0000008E(0xoooooo5,0x8058E8ED,0xF34B3C8C,0x00000000) Beginning dump of phisical memory
- 締切済み
- Windows XP
- エラーメッセージ
ちょっと長くなりますがエラーメッセージを書くので対処方法を教えてください。 A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these stops. Check to be sure you have adequate disc space. If a drive is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any Bios updates. disable BIOS memory options such as caching or shadowing. if you need to uses safe Mode to remove or disable components, restart your computer, prees F8 to select Advanced startup options, and the select safe mode. このメッセージが出て勝手にwindowsが再起動します。 何が原因でしょうか?
- ベストアンサー
- Windows系OS
- OSのインストール時に出るメッセージ
既出トピックでしたらすみません。 先日新しいパソコン(OSなし)を購入しました。 インストールしようとしたところ、セットアップが始まった後に以下のメッセージが出てしまいます。 サポートセンターにも問い合わせましたが故障ではないとの返答でした。 勉強不足かもしれませんが、ご教授ください。 【以下メッセージ】 A problem has been detected and windows has been shut down to prerent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any BIOS updatet. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Option, and then select Safe Mode.
- ベストアンサー
- Windows XP
- エラーメッセージ
3週間程前、大きなデータをDL中に停電があり、 それ以来以下のようなメッセージが出るようになりました。 ただ、このメッセージが出てからいったんシャットダウンし、 再度起動させると「ウィンドウズを通常起動する」の画面が出て、 そのまま通常起動すると普通に使えます。 しかし、一日おくとまた同じようなことになります。 なんとか直す方法を教えて頂けないでしょうか。 構成は Windows XP Home Celeron 2.6GHz 512MB memory HDD 120+80GB ASUS Vintage です。 以下がエラーメッセージです。 よろしくお願いします。 A problem has been detected and Windows has been shut down to prevent damage to you computer. If this is the first time you've seen this stop error screen, restart your computer.If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any BIOS updates. Disable BIOS memory option such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer,press F8 to select Advanced Startup Options, and then select Safe Mode. Technical information: *** STOP: 0X0000007E (0XC0000005,0X804E57E8,0XF7C96FD8,0X7C96CD4)
- ベストアンサー
- デスクトップPC
- 起動ディスクを入れるとエラーが起きます
起動ディスクを1~6を入れて6枚目を入れると 青画面になってこういうメッセージが出ます。 BIOSを更新した方がいいのでしょうか? 知識不足なので分かる方教えてください。 A problem has been detected and windows has been shut down to prevent damage to your computer. IF this is the first time you've seen this stop error screen, restart your computer.If this screen appears again, follow these steps: Check to be sure you have adequte disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any BIOS updates.Disable BIOS memory options such as caching or shadwing.If you need to use Safe Mode to remove or disable components,restart your computer,press F8 to select Advanced Stratup Options,and then select Safe Mode. STOP:0x000007E(0xc0000005,0xF7768DCE,0xF7C7903C,0xF7C78038) acpi.sys - Address F7768DCE base at F7754000,DateStamp 41107d27
- 締切済み
- Windows XP
- Windows XPを再インストールしようとするとエラーメッセージが出る
Windows XPのセットアップを開始するにはEnterキーを押してください。というところでEnterキーを押して次に進もうとすると A problem has been detected and windows has been shut down to prevent damage to your computer . If this is the first time you've seen this stop error screen, restart your computer, if this screen appears again, follow these steps: Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check your hard drive configuration, and check for any updated drivers. Run CHKDSK/F to check for hard drive corruption, and then restart your computer. Technical information: STOP: 0X00000024(0X001902FE,0XF7902814,0XF7902510,0XF70801FC) ntfs.sys -Address F70801FC base at F7073000, Datestamp 41107 eea と表示されてしまい、そこで止まってしまうのですがこの状態を回避するにはどうすればいいのですか?
- ベストアンサー
- Windows XP
- ノートパソコンを使用していると、いきなり下記の英文がでてきて固ってしま
ノートパソコンを使用していると、いきなり下記の英文がでてきて固ってしまいます。どなたか対処方法をご教示ください。 A problem has been detected and windows has been shut down to prevent damage to your computer. KERNEL_STACK_INPAGE_ERROR If this is the first time you’ve seen this stop error screen, Restart your computer. If this screen appears again, furrow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup options, and then select Safe Mode. Technical information: *** STOP: 0×00000077 (0×00000001, 0×0B0B0B0B, 0×00000000, 0×EBC93C4C) Beginning dump of physical memory
- 締切済み
- ノートPC
- パソコン起動の途中で止まる。下記エラーメッセージが出ます window
パソコン起動の途中で止まる。下記エラーメッセージが出ます windows xp サービスパック2 パソコン工房製 A problm has been detected and windows has been shut sown to prevent damage to your computer. If this the first time you've seen this error screen, restart your computer. If this screen appaers again, follow these steps: Check to be sure you have adequate disk space.If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Cheak with your hardware vendor for any BIOS updates. Disable Bios memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Adovanced Startup Options, and then Select Safe Mode. Technical information: ***Stop: 0x0000008E (0xC0000005,0x805529E9,0xA98B98C,0x00000000) Beginning dump of physical memory physcal memory dump complete. Contact your system adoministrator or technical support group for further assistance. よろしくお願いします
- 締切済み
- Windows XP
- WindowsXpインストール時に0x0000007E
WindowsXp HomeEditionがプリインストールされているマシンに、OEM版のXP Proをインストールしようとすると、以下のようなメッセージが出てインストールが途中で停止します。 A problem has been detected and windows has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer.If this screen appears again, follow these steps: Check to be sure you you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacture for driver updates. Try changing video adapters. Check with your hardware vender for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use SafeMode to remove or disable computers, restart your computer, press F8 toselect Advanced startup options, and then select SafeMode. STOP 0x0000007E(0xC0000005、0xF76130BF、0xF7A5F208、0xF7A5EF08) pci.sys - Address F76130BF base at F760C000 Datestamp 3b7d855c マシン詳細は DELL XPS M1210 OS:WindowsXP HomeEdition SP2 CPU:Intel CoreDuo T2500(2.0GHz) RAM:DDR2-SDRAM(512*2) 解決策をご教授いただけますよう、宜しくお願い致します。
- 締切済み
- Windows XP
- 再インストール
パソコンに電源を入れたまま、少し放っておくとブルーバックになってフリーズしてしまいます。 そのため、OSを再インストールしようとしているのですが、VISTAのロムをセットして電源を入れて、画面下にWINDOWSのバーが動いた後、ブルーバックになります。 内容は、 A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced startup Options, and then select Safe Mode. Technical infomation: *** STOP: 0x0000008E (0xc0000005,0x89168c15,0x808030D4,0x0000000) と、出ております どうすれば再インストールできるのでしょうか?
- 締切済み
- Windows Vista
お礼
ありがとうございました。 SP+メーカーをパソコンにインストールし、ISOイメージを作成するにまで至りました。 統合CDを作成するところでなまたエラーがでて困っていますのでまだXPをインストールするまではやっていませんが、情報いただいたことで一歩先に進めました。 ありがとうございました。
補足
大変失礼しました。 このパソコンは自作のものでWindows XP HomeEditionのインストールする際にこうなってしまいました。