• 締切済み

BSoD どうすればいい?

先日Windows7のKP41の件で質問させていただきました。 https://okwave.jp/qa/q9388131.html BlueScreenViewを入れたところ、先日のクラッシュ時のダンプファイルが見つかりました。 *** 以下BSoDメッセージ A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: Ntfs.sys SYSTEM_SERVICE_EXCEPTION If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000003b (0x00000000c0000005, 0xfffff80004b54adc, 0xfffff8800481f970, 0x0000000000000000) *** Ntfs.sys - Address 0xfffff880018d2781 base at 0xfffff88001829000 DateStamp 0x5693e8a9 BSoDメッセージ終わり *** Ntfs.sysが原因のようですが、このNfts.sysが何かがよくわかりません。 ハードウェアの知識は自作PCを組めるくらいはありますが、ソフトウェアの知識は全然です。 考えられる理由と対処法がありましたらご教授お願いします。

みんなの回答

  • yakan9
  • ベストアンサー率54% (2209/4062)
回答No.6

老婆心ながら、Kernel-Power 41病をまとめられているURLは下記があります。 Kernel-Power 41問題と対策メモ https://freesoft.tvbok.com/windows7/tool/kernel-power_41.html また、前回の回答で、Kernel-Power 41のイベントの直前のエラーイベントをメモして共通点を見つけることと記載しましたが、それの最も必要なものは、「ソース」名です。 これで区分できると思われます。 これも老婆心ながら。

全文を見る
すると、全ての回答が全文表示されます。
  • yakan9
  • ベストアンサー率54% (2209/4062)
回答No.5

前回の質問、 https://okwave.jp/qa/q9388131.html の、Kernel Power 41病の原因は、多岐にわたり、原因を特定するのは非常に難しいのです。 しかし、定期的に再現するのであれば、少しデータを取れば分かるかも知れません。 Windows 7は、ブルスクリーンの原因がはっきりしないものは全て、これに流していた感が強いです。 そこで、Kernel Power 41のイベントの直前のエラーや警告をメモして置き、何か共通点を見つけることで解決できるかも知れません。 多分、警告ではなくて、エラーだと思いますけどね。 Kernel Power 41が発生した時刻をメモし、5秒くらい前までのエラーをメモしていくと分かるような気がします。

全文を見る
すると、全ての回答が全文表示されます。
  • yakan9
  • ベストアンサー率54% (2209/4062)
回答No.4

> BSoD どうすればいい? 素人の我々が見て分かるものではありません。 何かヒントとなる語句がないか、ブルスクリーンのイベントをマイクロソフトに送信して、既知エラーの場合等、対応、参考URLアドレス等を返信されます。 やり方は、イベントビューアの該当イベントをクリックし、「イベントログのヘルプ」をクリックして送信します。 それも、我々の場合は、「ダメ元的ヒント」くらいです。 では、これらを見て分かるのはというと、開発者です。 汎用大型コンピュータのOSの設計、製造、テスト、保守をやっていました。

全文を見る
すると、全ての回答が全文表示されます。
  • chachaboxx
  • ベストアンサー率23% (412/1777)
回答No.3

Ntfs.sysは拡張子の如くシステムファイル NtfsはWindowsNT FileSystemの略語 世の中のメジャーなファイル仕様の一つです ウィキってみて下さい。 それがトラップされたのは間違いないのですが、それ、もしくはそれだけが原因とはいいきれません。例えば、HDDアクセス中の電源遮断とか、外部ノイズ(避雷)とか。 NTFSもWindows7→8→10とバージョンアップされて、より堅牢になってきてます。 質問の対策になってなくて、済みません。

全文を見る
すると、全ての回答が全文表示されます。
回答No.2

このメッセージで重要な部分は Technical Information: *** STOP: 0x0000003b (0x00000000c0000005, 0xfffff80004b54adc, 0xfffff8800481f970, 0x0000000000000000) *** Ntfs.sys - Address 0xfffff880018d2781 base at 0xfffff88001829000 DateStamp 0x5693e8a9 ということはご存知ですよね。 で ”STOP: 0x0000003b”で検索すると、 https://answers.microsoft.com/ja-jp/windows/forum/windows_7-update/%E3%83%96%E3%83%AB%E3%83%BC/72f8d0fd-1643-44e6-a76f-876e38fed01a その記事にwindows7用のSTOP: 0x0000003bに対する修正パッチがあるように書いてありました。 それをDLして適用してみたら?

全文を見る
すると、全ての回答が全文表示されます。
  • dragon-man
  • ベストアンサー率19% (2706/13664)
回答No.1

BSoDは予期しない状況に陥って、Windowsがにっちもさっちも行かなくなった状態です。何も出来なくなって、つまりWindowsとしては原因も対処法も分からなくなってバンザイした状態です。ですから再起動以外対処法はありません。この英文はそういう意味のことを言っています。再起動しても再発するようなら、PCメーカーにちゃんとアップデートをしているか聞けとか、マザーボードのBIOSをいじくってみろとか。要するにマイクロソフトとしては打つ手がないと投げているのです。これはWindowsのプログラムバグであり、バクをなくさないとどうにもまりません。Windows7ではBSoDがしばしば起きましたが、Windows10ではほとんどなくなりました。OSとしての完成度が高くなったのでしょう。

全文を見る
すると、全ての回答が全文表示されます。

関連するQ&A

  • ブルースクリーンの対処方法

    自宅のPCがブルースクリーン連発で対処方法がわからなく困っています。 BlueScreenViewを使い (主に2個出てくるので2個貼り付けました) ブルースクリーンのところを抜き出してみました 一つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: DRIVER_IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x000000d1 (0xfffff8800a044638, 0x0000000000000002, 0x0000000000000008, 0xfffff8800a044638) *** - Address 0x0000000000000000 base at 0x0000000000000000 DateStamp 0x00000000 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntoskrnl.exe PAGE_FAULT_IN_NONPAGED_AREA If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x00000050 (0xfffff90098c74f5c, 0x0000000000000000, 0xfffff960000577f2, 0x0000000000000002) *** ntoskrnl.exe - Address 0xfffff80004076bc0 base at 0xfffff80004001000 DateStamp 0x521ea035 どうかよろしくお願いします。

  • ブルースクリーンが起こってしまったのですが

    質問をさしてもらい ブルースクリーンということが分かり (対処の仕方がわかりません) BlueScreenView を使い (何個かありましたが数が多かったので何個かはりました) ブルースクリーンのところを抜き出してみました ハードディスクのバックアップはとらなくても大丈夫でしょうか A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: USBPORT.SYS DRIVER_IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x000000d1 (0x0000008c, 0x00000002, 0x00000000, 0x8fbc62c4) *** USBPORT.SYS - Address 0x8fbc62c4 base at 0x8fbc0000 DateStamp 0x49e01fcf 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x00000063, 0x0000001b, 0x00000001, 0x82ec15ce) *** ntkrnlpa.exe - Address 0x82e67fd9 base at 0x82e1a000 DateStamp 0x4cb710d6 三つめ A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: Ntfs.sys NTFS_FILE_SYSTEM If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x00000024 (0x001904aa, 0xbf7b7a18, 0xbf7b7714, 0x82ebe22c) *** Ntfs.sys - Address 0x8b41cfff base at 0x8b403000 DateStamp 0x49e0192a

  • Windows7 ブルースクリーンについて

    先日PCを自作したのですが、シャットダウンするときに100%ブルースクリーンになります。 画面には下記のように表示されます。 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: PAGE_FAULT_IN_NONPAGED_AREA If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x00000050 (0xfffff888037f9428, 0x0000000000000000, 0xfffff880037f680a, 0x0000000000000005) *** - Address 0x0000000000000000 base at 0x0000000000000000 DateStamp 0x00000000 いろいろ調べて、試してみてもなかなか有効な解決方法がが見つかりません。 解決するために御助力していただけたら幸いです。 どうかよろしくお願いしますm(_ _)m

  • ブルースクリーンが出て・・・

    A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntoskrnl.exe BAD_POOL_HEADER If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x00000019 (0x0000000000000022, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000) *** ntoskrnl.exe - Address 0xfffff80003eba700 base at 0xfffff80003e4a000 DateStamp 0x4d9fdd34 というブルースクリーンが出てたまにPCが落ちます 対処法を教えてくださいお願いします

  • ブルースクリーンが起こってしまったのですが

    質問をさしてもらい ブルースクリーンということが分かり (対処の仕方がわかりません) BlueScreenView を使い (何個かありましたが数が多かったので何個かはりました) ブルースクリーンのところを抜き出してみました ハードディスクのバックアップはとらなくても大丈夫でしょうか (色々と対処をしてもまた別の原因でブルースクリーンが起こってしまった場合はどうすればよいでしょうか) A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: luafv.sys IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x6c006160, 0x0000001b, 0x00000001, 0x82ef55ce) *** luafv.sys - Address 0x91be4036 base at 0x91bdb000 DateStamp 0x47918afb 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: tmcomm.sys PAGE_FAULT_IN_NONPAGED_AREA If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x00000050 (0xd76c5da4, 0x00000000, 0x807c6d5b, 0x00000002) *** tmcomm.sys - Address 0x8f28ce4b base at 0x8f287000 DateStamp 0x49d4727e

  • パソコンが急にブルー画面になり再起動します

    パソコンが急にブルー画面になり再起動してしまいます。昨日も同じブルー画面になり再起動しました。 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: iaStor.sys If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x70860002 (0x00000003, 0x00000002, 0x00000017, 0x00000000) *** iaStor.sys - Address 0x8bc5ee47 base at 0x8bc01000 DateStamp 0x4b071eec とでてきて再起動します。 パソコンはwindows7です。

  • ブルースクリーンの対処法

    質問をさしてもらい ブルースクリーンということが分かり (対処の仕方がわかりません) BlueScreenView を使い (何個かありましたが数が多かったので何個かはりました) ブルースクリーンのところを抜き出してみました ハードディスクのバックアップはとらなくても大丈夫でしょうか A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: fltmgr.sys PAGE_FAULT_IN_NONPAGED_AREA If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x00000050 (0xd581f284, 0x00000000, 0x8b4118d9, 0x00000002) *** fltmgr.sys - Address 0x807c2ffb base at 0x807c0000 DateStamp 0x49e01907 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe ATTEMPTED_WRITE_TO_READONLY_MEMORY If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x000000be (0x993c54cc, 0x87887121, 0x8bf73c14, 0x0000000b) *** ntkrnlpa.exe - Address 0x82ed4379 base at 0x82e3c000 DateStamp 0x4cb710d6 三つめ A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: aswSP.SYS DRIVER_IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x000000d1 (0x00000000, 0x00000002, 0x00000000, 0x90e1fe38) *** aswSP.SYS - Address 0x90e1fe38 base at 0x90e05000 DateStamp 0x4d65202b

  • ブルースクリーン 0x0000003b

    A problem has been detected and windows has been shut down to prevent damage to your computer. SYSTEM_SERVICE_EXCEPTION If this is the first time you've seen this stop error screen, restart your computer. if this screen appears again.follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation. ask your hardware or software manufacturer for any windows updates you might need. If problems continue. disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. yout computer,press F8 to select Advanced startup Options,and then select Safe Mode. Technical information: STOP: 0x0000003B (0x00000000C0000005,0xFFFFF800037F59BC,0xFFFFF8800ACBBB00,0x0000000000000000) Collecting data for crash dump ... Initializing disk for crash dump ... Beginning dump of physical memory. Dumping physical memory to disk: 80 このようなエラーが出て再起動されました。 どこが悪いんでしょうか・・・??

  • パソコンの起動時にブルースクリーンになる

    あまりパソコンに詳しくないので皆さんのお力をお借りしたいです。 パソコンを起動すると不定期にブルースクリーンが発生します。 ロゴまでは出てディスクトップの画面に移行する時にエラーが発生します。 1週間何もない時もあれば、2日連続して起こる場合もあります。 1ヶ月も前からなのでシステムの復元が行えません。 問い合わせたり自分で調べてみても、解決策がわかりませんでした。 もう初期化するしかないんでしょうか… ブルースクリン画面の文面を書いておきます…自分は英語力がないので内容がわからないorz A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntoskrnl.exe IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x0000000000000000, 0x0000000000000002, 0x0000000000000000, 0xfffff800038fb174) *** ntoskrnl.exe - Address 0xfffff800038e61c0 base at 0xfffff80003867000 DateStamp 0x4fa390f3

  • ブルースクリーンの対処法

    質問をさしてもらい ブルースクリーンということが分かり (対処の仕方がわかりません) BlueScreenView を使い (何個かありましたが数が多かったので何個かはりました) ブルースクリーンのところを抜き出してみました ハードディスクのバックアップはとらなくても大丈夫でしょうか A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe MEMORY_MANAGEMENT If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000001a (0x00041287, 0x00000008, 0x00000000, 0x00000000) *** ntkrnlpa.exe - Address 0x82ecd379 base at 0x82e35000 DateStamp 0x4cb710d6 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: hal.dll DRIVER_CORRUPTED_EXPOOL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x000000c5 (0x62313363, 0x00000002, 0x00000001, 0x82f2e010) *** hal.dll - Address 0x82e10000 base at 0x82e0d000 DateStamp 0x49e018d9 三つめ A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: luafv.sys DRIVER_CORRUPTED_EXPOOL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x000000c5 (0x00000004, 0x00000002, 0x00000001, 0x82eff010) *** luafv.sys - Address 0x913606aa base at 0x91355000 DateStamp 0x47918afb