• ベストアンサー

Win7 から10 にアップグレイド出来ません?

最後の段階で次の警告が表示され、元の Win7 に逆戻りしてしまいます。 Windows could not configure one or more system components. To Install Windows, restart the computer and then restart the installation. 原因と対策についてアドバイスを頂ければ幸いです。

質問者が選んだベストアンサー

  • ベストアンサー
noname#222867
noname#222867
回答No.2

メディア作成ツールで強制できる http://www.microsoft.com/ja-jp/software-download/windows10 ワイはアップデートでも出現しなかったタブレットを強制で10にした

PIPENOKEMURI
質問者

お礼

この方法(NO2回答)で巧く行きました。 有り難うございました。

その他の回答 (4)

  • narashingo
  • ベストアンサー率74% (10167/13676)
回答No.5

PCのメーカーのhPなどで、アップグレード対象の機種であることは確認されていますか? Microsoftの方針とは関係なく、概ね4年以上前の製品は対象ではない可能性が高いです。 そうでない場合、「Windowsは、1つ以上のシステム・コンポーネントを構成できませんでした。」とのことですが、システムに不整合な状態があるのかも? 場合によっては、データをバックアップして、Win7をリカバリー後にそのままアップグレードに挑戦してみることは考えられないですか?

PIPENOKEMURI
質問者

お礼

NO2回答の方法で巧く行きました。

PIPENOKEMURI
質問者

補足

2年+製品です アドバイスを有り難うございました

  • heyboy
  • ベストアンサー率21% (1852/8729)
回答No.4

対策は外付けハードディスクや 外付けドライブを外す 最小の起動出来る状態で インストールを始める 事ぐらい?

PIPENOKEMURI
質問者

お礼

NO2回答の方法で巧く行きました。

PIPENOKEMURI
質問者

補足

早速のコメント有り難うございました パソコンには何も余計な付属物は無いのですが?

  • norepe
  • ベストアンサー率19% (107/560)
回答No.3

windows could not configure one or more system components.To install Windows, restart the computer and then restart the installation. 同じ文面のようなエラ-が下にも なんだこりゃ???。 http://detail.chiebukuro.yahoo.co.jp/qa/question_detail/q1366937608

PIPENOKEMURI
質問者

お礼

NO2回答の方法で巧く行きました。

  • alien5
  • ベストアンサー率19% (788/3987)
回答No.1

パソコンを構成しているパーツの何かがWin10に対応していないのだと思われます。 例えばビデオカードとか。 私の場合はモニター3台接続しているのでビデオカードを2枚挿しているのですが、そのうちの1枚がWin10に対応しておらず(ビデオカードが10年前の古いもので、インストールするWin10が検知できない)インストールできませんでした。 結局、Win10をインストールする時だけ非対応のビデオカードを取り外してインストールして、インストール後に再び取り付けるというやり方でできました。 私の場合は2枚のビデオカードが機種は異なるのですがドライバーは共通のドライバーなので、これでうまくいきました。

PIPENOKEMURI
質問者

お礼

NO2回答の方法で巧く行きました。

PIPENOKEMURI
質問者

補足

早速のコメント有り難うございました パソコンには何も余計な付属物は無いのですが?

関連するQ&A

  • 再起動とV UPができない。

    PC仕様中に、再起動の案内後に案内に従って利用していると、数時間後に?Windows could not configure one or more system components.To install Windows,restart the computer and then restart the installation. のメッセージの後が、OKキ-、×を押しても変更前の設定になってしまいます、解決法を教えて下さい。 ※OKWAVEより補足:「NEC 121ware : Windows」についての質問です

  • win10(1903がup date出来ない

    最新のウインドウ10(1903)のバージョンUが出来ません バージョン:現在は1803 2018/06/13です WIN 7→10 windows 10home 1 念のため操作手順を記します 以下のガイドに従って http://www.microsoft.com/ja-jp/software-dounload/windows10   ダウンロードとインストールしました   終了後次の様なメッセイジがでました  ウインドウズセットアップ windows couid not configure one or more system components to install windows 、restart the computer and then restart the installation 2   OK コンピュータに対する変更を元に戻していますと言うメッセイジがでました これは更新してないのではないでしょうか 3 以下のガイドに従ってエラーを修正しました https://support.microsoft.com/ja-jp/help/10164/fix-windows-update-errors windows up データーベースの破損を修正して下さい 今すぐ実行しました とらぶるしゅティング実行しました 見つかた問題点 ・ windows updateデータベースにエラーが発生した可能性があります  解決済 ・ windows update コンポーネントを修復する必要があります   解決済 ・ 保留中の更新プログラムの確認      解決済 トラブルシューティング完了 と言うメッセイジがでましたのでもう一度1からやり直しました(ダウンロードから インストール)を結果は同じでした 駄目でした どなたか解決方法を教えてください 気になった疑問 3でエラーを修正しましたけどその前に変更を元に戻しているいるので意味がない ですかね もし違っていましたらウインドウズセットアップ画面でどのようにすればいいでしょうか 宜しくお願いします  

  • 起動するたび

    One or more components from your Hotber tools is disabled or missing. Do you want to fix the missing or disabled componets? というウインドウがでてしまいます。 これは、どうすれば解決できるのでしょうか?

  • viの操作

    [root@ocn conf]# /opt/apache/bin/apachectl restart /opt/apache/bin/apachectl restart: httpd not running, trying to start Syntax error on line 789 of /opt/apache/conf/httpd.conf: AddType requires at least two arguments, a mime type followed by one or more file extensions /opt/apache/bin/apachectl restart: httpd could not be started 789行目を見たいのですが、行を探す方法って何かありますか?

  • FireFoxPortable1.5.0.8へのアップデートで動かない。

     FireFoxPortableの1.5.0.7のhelpで1.5.0.8へアップデートするとまず 「One or more files could not be updated. Please make sure all other applications are closed and that you have permission to modify files, and then restart Firefox to try again.」というエラーが出てきて指示通り何も動かさず、起動してもだめです(ファイル変更の禁止なんてしてないし)。あと、最初のエラーが出る前には381KBのダウンロードを実行していて、次に起動すると最初からアップデートをするようになっていて6.1MBのダウンロードを開始しました。  FirefoxPortableは1.5.0.8にアップデートできないのでしょうか。  そういえばThunderbirdPortableもアップデートで動かなくなりました。

  • windows7 RC 64bitのインストールができません。

    インストールしようとしても this installation disc isn't compatible with your version of windows. to upgrade, you need the correct installation disc. for more information, check your computer. to install a new copy of windows, restart your computer using the installation disc, and then select custom. とエラーが出てしまいます。 翻訳してみたところこのパソコンには対応していません、とのことですが7の32bitはインストールできました。 もしかして64bitだから対応してないのかとも思いましたが、ハードはすべて最近買ったものなので64bit未対応というのは考え難いですし、コンピューター→プロパティ→windowsエクスペリエンス インデックス→パフォーマンスとシステムに関する詳細情報を表示および印刷します では64bit対応となってました。 自分でいろいろ検索して試してみましたが解決しません。 解決策を知ってる方がいましたら回答よろしくお願いします。

  • パソコンのブルースクリーンエラーで困っています

    最近パソコンの電源をシャットダウンする3回に1回はフリーズしブルースクリーンがでます。 内容は A problem has been detected and windows has been shut down to prevent damage to your computer IRQL_NOT_LESS_OR_EQUAL if this is the first time you've seen this stop error screen, restart your computer. if this screen appears again, follow these steps Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or softwaremanufacture for any windows updates you might need. If problems continue disable or remove any newly installed hardware or software, Disable BIOS memory options such as cathing or shadowing. If you need to use safe mode to remove or disable components. restart your computer press F8 to select Advanced startup options. and then select safe mode. Technical information STOP 0×0000000A(0×0000000C,0×00000002,0×00000000,0×80507496) です。 このエラー表示をみて解決策が分かる方いましたら分かりやすく教えてください。お願いしますm(__)m

  • 長い長い英文です。

    最近、いきなり青い画面になり英文の書かれた画面になってしまいます。 A problem has been detected and windows has been shut down to prevent damage to your computer. DRIVER-IRQL-NOT-LESS-OR-EQUAL If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again,follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe Mode to remove or disable components,restart your computer,press F8 to select Advanced Startup Options,and then select safe Mode. 以上です。 文章内の大文字は記載どおりになっています。 どんな意味の文章でしょうか?

  • パソコンが起動しなくなりました

    突然パソコンが起動しなくなりました。 黒い画面に白い文字で Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: 1. Insert your windows installation disc and restart your computer. 2. Choose your language settings, and then click "Next." 3. click "Repair your computer." If you do not have this disc. contact your system administrator of computer manufacturer for assistance. File: \Boot\BCD Status: 0xc000000f Info: The Boot Configuration Data for your PC is missing or contains errors. と出てきます。 Windowsインストールディスクもありません。 (Windowsはネットでアップしていました。 Windows10) どうすればいいでしょう? またロゴが出ているときにF2キーを押すと画面が変わりますが どこをどうすればいいのかもわかりません。 パソコンはあまり詳しくないです。 教えて下さい。

  • 再インストールが出来ません a problem has been~(代理)

    WinXPsp1を再インストールしようと思ったのですが いざやってみると以下の英文がすぐに表示されて止まってしまいます。(止まるのは使用条件に同意したあとくらいで止まります)何が原因でどうすれば解決するのでしょうか? ご教授よろしくお願いいたします。 a problem has been detected and windows has been shut down to prevent damage to your computer IROL_NOT_LESS_OR_EQUAL If this is the first time you`ve seen this stop error screen restart your computer If this screen appears again follow these steps check tomake sure any new hardware or software is properly installed If this is a new installation ask your hardware or software manufacture for any windouws updates you might need if problems continue disable or remove any newly installed hardware or software disable BIOS memory options such as caching or shadowing if you need to use safe mode to remove or disable components restart your computer press F8 to select Advanced startup options and then select safe mode Technical information この英文の後に stop:0xooxooxAみたいな英字が表示されます