Windows7アップデートでトラブル発生!解決策は?

このQ&Aのポイント
  • Windows7アップデートでトラブルが発生しました。WindowsXPからのアップデートで互換性の問題があり、正規の方法では解決できませんでした。
  • BIOSの設定を変更して、CD/DVDを最優先でブートする方法を試しましたが、ブートマネージャーのエラーメッセージが表示されました。
  • スタートアップの修復が解決策の一つとして挙げられますが、具体的な方法や問題の解決可能性については分かりません。どうすればいいでしょうか?
回答を見る
  • ベストアンサー

Windows7にアップデート出来ません・・・

WindowsXP(32bit)からWindows7(64bit)にアップデートする過程でトラブルが起こりました. 互換性がないために,正規のアップデート方法がだめなので,BIOSでCD/DVDを最優先でブートするように設定して,試してみましたが,ブートマネージャー(以下のメッセージ)が出てしまいました. Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: 1. Insert your windows installation disc and restart your computer. 2. Choose your language settings, and then click "Next." 3. Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance. File: /windows/system32/boot/winload.exe status: 0xc000035a Info: Attempting to load a 64-bit application, however this CPU is not comfortable with 64-bit mode. この場合,どうすればいいですか?(ちなみに/windows/system32のフォルダを探してみましたが,bootという名前のフォルダは見つかりませんでした) ネットをいろいろ回ってみた所,"スタートアップの修復"がポイントだったようでしたが,第一その方法も分かりませんし,これによって解決する問題なのかも分からないので,質問させていただきました.

質問者が選んだベストアンサー

  • ベストアンサー
  • kawais070
  • ベストアンサー率52% (2242/4282)
回答No.2

64bitのCPUじゃないってだけじゃないかと… CPUが64bitかどうか確認しましたか?自分で確認できないのなら、パソコンのメーカー・型番を補足に記載してください。当方で調べてみます。

dennbajiba
質問者

お礼

今年はかなり忙しく時間が取れなかったのと,7のアップデート以前に色々ごちゃごちゃしており,その問題の解決を考えてたのとで,質問したまま置き去りにしてしまいました・・・.無限ループの問題は解決できないことになってしまったので,買い換える事になりました.kawais070さん含め回答してくださった方本当にすみません・・・.数ある回答の中で,kawais070さんの回答をベストアンサーとして締め切らせていただきます.

dennbajiba
質問者

補足

遅くなってすみません.パソコンはあまり詳しくない上,忙しいため,"CPUを調べる"という言葉を聞いてちょっと混乱していました. メーカーはNECで,型番はPC-VL500CDです. ただ,今は,パソコンがNECロゴ→黒い画面→起動コマンド選ぶ→NECロゴ→・・・の無限ループにはまっており,それの解決がまず必要です. ただ,CPUが64bitかは今知っておきたいので,よろしくお願いします.

その他の回答 (6)

回答No.7

http://windows.microsoft.com/ja-JP/windows7/help/upgrading-from-windows-xp-to-windows-7 まずお使いのパソコンのCPUを調べてください。IntelかAMDなのかは知りませんけどおおよそIntelではないかと?何ビットのCPUなのか?64ビットOSを使えるならハードディスクのパーティションを削除します、これにはWindows以外のLinuxべースの起動できるソフトが必要なのでそれを用意して削除します。新規にインストールすれば完了します。32ビットCPUならはなから無理ですけど?

  • nijjin
  • ベストアンサー率27% (4705/17425)
回答No.6

「Info: Attempting to load a 64-bit application, however this CPU is not comfortable with 64-bit mode.」 これが全てではないかと・・・ CPUがwindows7の64bitに対応していないんじゃないのか?というメッセージです。 CPUが対応していてもBIOSで制限されていて動かないと言う事も考えれられます。 その場合はBIOSの設定や場合によってはアップデートが必要です。

  • foitec
  • ベストアンサー率43% (1079/2453)
回答No.5

答えは明確です。 however this CPU is not comfortable with 64-bit mode. しかしながら、CPUが64bitのものではありません。 そもそも何故にWindows7 64bitのOSを購入したのですか? 理由を教えてくださいね。

  • MNH10W
  • ベストアンサー率48% (2859/5927)
回答No.4

>この場合,どうすればいいですか? 下記の2項目について確認してみましょう 1. 64ビットWindowsは64ビット対応CPUが必要です。 2. 64ビット対応CPUであってもBIOS設定が必要です。

noname#235638
noname#235638
回答No.3

たぶん私の回答は、トンチンカンだと思うのですが、 すみません。 64ビットモードと互換性がありません と言っているように感じます。 CPUの問題かもしれません。 そもそも、そのコンピュータで7がうごくのか? http://www.microsoft.com/ja-jp/download/details.aspx?id=20 で確認してみたり、とにかく都合のいい方法で コンピュータを調べてみてください。 それと、今私たちがほしい情報は、 CPUが何かと、メモリ容量です。 後は今後の回答を待つ。

  • dimio38
  • ベストアンサー率23% (869/3647)
回答No.1

XPから7には、アップデートできないはずなのまで、クリーンインストールだよ。

関連するQ&A

  • 「Inspiron mini9へのwindows 7 のインストールが

    「Inspiron mini9へのwindows 7 のインストールが上手くいかない問題について」 すみません!!助けて下さい!! 先日、オークションでDELL Inspiron mini9を購入。 Model No:PP39S BIOS:A00 メモリ:1G SSD:8G OS:windows XP リカバリーDVD:なし メモリを2Gに換装 SSDをRanCore32Gに換装 インストールDVDは、オークションで手に入れた「新品正規版 Windows7 Ultimate 64bit (Lenovo)」 インストールDVDを起動してWindows 7(64bit)をインストールしようとすると、下のメッセージが出ました。 windows failed to start. A recent hardware or softwara change might be the cause. To fix the problem: 1. Insert your windows installation disc and restart your computer. 2. choose your language settings, and then click "next." 3. click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance. File: \windows\system32\boot\winload.exe Status: 0x000035a Info: Attempting to load a 64-bit application, however this CPU is not compatible with 64-bit mode. ENTER キーを押すと下のメッセージが。 Choose an operating system to start, or press TAB to select a tool: (Use the arrow keys to highlight your choice, then press ENTER.) windows Setup [EMS Enabled] To specify an advanced option for this choice, press F8. あとは、ENTER キーを押す毎に繰り返し。 もしかして、mini9にwindows7の64bitはインストールできないのでしょうか? どなたか、ご教授をよろしくお願い申し上げます。

  • Windows10のクリーンインストール

    Windows8.1Pro 64bit版がプリインストールされたThinkpad X250(20CL)にWindows10 32bit版を選択しクリーンインストールしようとすると、Windows Boot Managerで以下のメッセージが出てしまいインストールが進みません。64bit版を選択するとインストールが最後まで正常に完了します。そもそも32bit版をインストールすることはできるのか、また可能な場合はどうすればいいのかが不明です。どなたかご教授いただけないでしょうか? よろしくお願いいたします。 ********************************************** Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: 1.Insert your Windows installation disc and restart your computer. 2.Choose your language settings, and then click “Next”. 3.click “Repair your computer.” If you do not have this disc, contact your system administrator or computer manufacturer for assistance. File: \windows\system32\boot\winload.efi Status: 0xc0000359 Info: The application or operating system couldn't be loaded because a required file is missing or contains errors. ※OKWAVEより補足:「Lenovo:ノートブック(ThinkPad)」についての質問です。

  • 富士通 BIBLO NF/B70をWindows7にアップグレードして

    富士通 BIBLO NF/B70をWindows7にアップグレードして使っています。 調子が悪いためリカバリして初期の状態にもどしたいと思います。 中古で購入しましたが本体以外ディスクや説明書はなかったためリカバリのやり方がわかりません。 富士通のホームページにマニュアルがあったので読んでみたところF12からトラブル解決ナビで進めていけば良いみたいですが意味不明な文字がでてリカバリできません。 トラブル解決ナビを選択すると以下の文字がでます。                 Windows Boot Manager Windows failed to start. A recent hardware or software change might be the Cause. To fix the problem: 1. Insert your windows installation disc and restart your computer 2. Choose your language settings, and then click “Next.” 3. Click “Repair your computer.” If you do not have this disc, contact your system administrator or computer manufacturer for assistance. File: windows\ system32\ winload.exe Status: 0xc000000e Info: The selected entry could not be loaded because the application is missing or corrupt. ENTER=Continue ESC=Exit Enterキーを押すと以下の文字がでます。             Windows Boot Manager Choose an operating system to start, or press TAB to select a tool: (Use the arrow Keys to highlight your choice, then press ENTER.) Windows7 To specify an advanced option for this choice, press F8. Tools: Windows Memory Diagnostic ENTER=Choose TAB=Menu ESC=Cancal お手数ですがご回答よろしくお願いします。

  • windows Boot Manager

    DELL INSPIRON/1501を使っています。 いつも通りパソコンの電源を入れると突然windows Boot Managerと メッセージが出てパソコンが立ち上がりません。 OSはWINDOWS VISTAが購入時からインストールされています。 因みに画面には下記のようなメッセージが表示されているのですが 私には何を意味しているのかさっぱり理解できません。 どなたかご説明をお願い致します。 windows failed to start.A recent hardware or software change might be the cause.To fix the problem: 1.Insert your windws installation disc and restart your computer. 2.choose your language settings,and then click`next`. 3.click`repair`your computer.` If you do not have this disc,contact your system administrator or computer manufacturer for assistance. file:\Boot\BCD status:0xc000000f Info:An error occurred while attempting to read the boot configuration data.

  • パソコンが起動しなくなりました

    突然パソコンが起動しなくなりました。 黒い画面に白い文字で Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: 1. Insert your windows installation disc and restart your computer. 2. Choose your language settings, and then click "Next." 3. click "Repair your computer." If you do not have this disc. contact your system administrator of computer manufacturer for assistance. File: \Boot\BCD Status: 0xc000000f Info: The Boot Configuration Data for your PC is missing or contains errors. と出てきます。 Windowsインストールディスクもありません。 (Windowsはネットでアップしていました。 Windows10) どうすればいいでしょう? またロゴが出ているときにF2キーを押すと画面が変わりますが どこをどうすればいいのかもわかりません。 パソコンはあまり詳しくないです。 教えて下さい。

  • ブートマネージャーの回復の方法を教えて下さい。

    自作パソコンです。(作ってもらいました)Windows VistaとXPのデュアルブートを設定しています。 XPを使用中におかしくなりました。 詳しい状況は下記の通りです。 電源を入れるとWindowsブートマネージャが表示されます。 ↓表示内容:ここから↓ Windowsブートマネージャ Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: 1, Insert your windows installation disc and restart your computer. 2, Choose your language setting, and then click "Next." 3, Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance. File:/Boot/BCD Status: 0xc000000f Info: An error occurred while attempting to read the boot configration data. ↑ここまで↑ 1番の、「ウィンドウ設置ディスクを挿入し、コンピューターを再起動する。」を試してみても読み込みません。画面も上記の表示になります お手上げ状態です。当方、素人でございます。回復方法をご教授いただければ幸いです。お願い致します。

  • Windows Updateが何回やっても失敗します。

    Windows Updateが何回やっても失敗します。 Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista, and Windows Server 2008 x86 (KB2416447) ダウンロード サイズ: 13.7 MB この更新プログラムを有効にするには、コンピューターを再起動する必要があります。 更新プログラムの種類: 重要 A security issue has been identified that could allow an attacker to compromise your Windows-based system that is running the Microsoft .NET Framework and gain access to information. You can help protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer. 詳細情報: http://go.microsoft.com/fwlink/?LinkId=202365 ヘルプとサポート: http://support.microsoft.com ーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーー このエラーに関するヘルプの取得を押すと "WindowsUpdate_00000643" "WindowsUpdate_dt000" に関する 11 件の結果 1. 1 Windows Update エラー 8007000b 2. 2 Windows Update エラー 80070643 3. 3 更新プログラムのインストールに関する問題のトラブルシューティング 4. 4 Windows Update エラー 800f020b 5. 5 Windows Update エラー 80072efd 6. 6 Windows Update エラー 800f0828 7. 7 Windows Update エラー 80072ee2 8. 8 Windows Update エラー 2 9. 9 Windows Update エラー 80246008 10. 10 Windows Update エラー 80070002 11. 11 Windows Update エラー 80070422 とでます。 どうすればいいのでしょうか? OSは vistaSP2のホームプレミアムです。

  • パソコンが起動しなくなりました。

    突然パソコンが起動しなくなりました。 黒い画面に白い文字で Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: 1. Insert your windows installation disc and restart your computer. 2. Choose your language settings, and then click "Next." 3. click "Repair your computer." If you do not have this disc. contact your system administrator of computer manufacturer for assistance. File: \Boot\BCD Status: 0xc000000d Info: The windows Boot configuration Deta file is missing reguired information と出てきます。 F8を連打しても出てこず、BIOSを開いて初期化しようとしましたがダメでした。 修理に出すしかないのでしょうか? 詳しい方教えて下さい。 Windows7 NEC Lavie

  • パソコン起動時に黒いエラー画面が出ます。

    お手数ですが修理以外で解決策をお願いします。リカバリーディスクはありません。 起動時にロゴ→黒い画面エラーメッセージとなります。 使用してるのはVista。HITACHIのPrius。ノートパソコンです。 エラーメッセージは 「Windows Boot Manager」 Cwindows failed to start. A recent hardware or software change might be the cause.To fix the problem: 1.Insert your windows installoation disc and resart your computer. 2.choose your language settings, and then click Next 3click Repair your computer. If you do not have this disc.contact your system abmnistrator or computer manufacturer for assistance. file: windows system32 winload.exe Status: Ox000000f Info:The selected entry could not be loaded be loaded because the application is missing or corrupt. 中のデータは諦めているので、初期化しようと思い、起動時にF2 LoadUser Defaults→OK Save Changes and Exit→OKで初期化しようとしました。 (あってるのか分かりませんが) しかしそれは再起動がかかってまた黒画面のエラーメッセージになりました。 (F8も連打してみましたが何もおこらず・・・) 思い出してみたら、昨日アップデートでwindowsサービスパックインスト時に エラーが出てたのでそれが原因かもしれません。 文章が下手なのとパソコン知識がないもので、伝わるか不安ですがどうぞ宜しくお願いします

  • windows7 RC 64bitのインストールができません。

    インストールしようとしても this installation disc isn't compatible with your version of windows. to upgrade, you need the correct installation disc. for more information, check your computer. to install a new copy of windows, restart your computer using the installation disc, and then select custom. とエラーが出てしまいます。 翻訳してみたところこのパソコンには対応していません、とのことですが7の32bitはインストールできました。 もしかして64bitだから対応してないのかとも思いましたが、ハードはすべて最近買ったものなので64bit未対応というのは考え難いですし、コンピューター→プロパティ→windowsエクスペリエンス インデックス→パフォーマンスとシステムに関する詳細情報を表示および印刷します では64bit対応となってました。 自分でいろいろ検索して試してみましたが解決しません。 解決策を知ってる方がいましたら回答よろしくお願いします。