• 締切済み

XPが起動せず困ってます。

FUJITSU FMV BIBLO NF40Tを使っています。 兄がWindows Media Playerで動画を見ていて、音量を上げようとボリュームのボタンを押したところ、 フリーズして音声もずっと繰り返しになっていたので、思わず電源ボタンで電源を切って、 また起動したところ、黒い画面に白文字で『Windowsが正しく起動できませんでした。』と表示され『セーフモード』など表示され、 再起動を繰り返しています。 家族全員PCは得意じゃなく、これは別の私個人のPCで質問しています。 色々検索かけて今わかる情報を書いておきます。 ・起動ディスクを持っていません。 ・起動ディスクをフロッピーで作るやり方を試そうとして、 私のPCでフロッピーがフォーマットできませんでした。 (これは明日新しいフロッピーを買ってきて もう一度やってみようかと思います。) ・セーフモードでも起動できません。 ・FUJITSUのかんたんバックアップも『選べる項目がないです』と言われました。 ・『自動的に再起動しない』を選択し、エラーメッセージが表示されたんですが、 『A proburem has been detected and windows has been shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME if this is the first time you've seen this stop error screen. restart your computer.if this screen appears again. follw these steps: Check to make sure any new hardwere or software is properly installed. If this is a new installation. ask your hardware or software manufacturer for any windows updates you might need. If problems continue. disable or remove any newly installed hardware or softoware. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components. restart your computer. press F8 to select Advanced Startup Options. and then select Safe Modo. Technical information: ☆☆☆STOP: 0×000000ED (0×82B51578,0×⊂0000006,0×00000000,0×00000000) 』 わからないのでとりあえず出てきたメッセージ全部書きました。 ☆のところは何の記号化わからなかったです。 情報も少なく、大変読みずらい文章ですが、本当に困っています。 わかる方がいらっしゃいましたら、是非とも助言をお願いします!!

みんなの回答

  • koketa58
  • ベストアンサー率18% (355/1961)
回答No.4

起動FDを別のパソコンで作ってchkdsk /rでたぶんなんとかなりそうですね。 検索すると回復事例は結構あります。 それから 富士通のリカバリCD/ディスク有償サービス http://azby.fmworld.net/support/attachdisk/

  • violet430
  • ベストアンサー率36% (27472/75001)
回答No.3

>UNMOUNTABLE_BOOT_VOLUME http://www.ironhearts.com/diary/archives/001476.html OSを再インストールしないと駄目ですね。 メーカ製でしたらマニュアルを良く読んで再セットアップして下さい。

  • goold-man
  • ベストアンサー率37% (8365/22183)
回答No.2

>STOP 0x000000ED >UNMOUNTABLE_BOOT_VOLUME 参考URLによると、 40 線ケーブルを 80 線 UDMA ケーブルに交換 >起動ディスクを持っていません リカバリCD-ROMはありませんか? 起動FDディスクを他機にダウンロードし、作成しても、起動後に起動FDディスクにはOSが入っていないため、OSのCD-ROMを要求されると思いますが。 BIOSセットアップ画面でHD boot優先からCD boot優先に変更し、CD-ROMを挿入、リカバリできませんか? >Windowsが正しく起動できませんでした データを復旧したい場合は、内蔵HDを取り外し、HDDケースに入れてUSB接続外付けHDDにして他機で認識できれば可能、またはケースに入れずに他のデスクトップ機にスレーブ接続する。あるいはKNOPPIX(Linux系OS)でデータ救出する。 下記URLをご覧ください。 http://oshiete1.goo.ne.jp/qa1889921.html

参考URL:
http://support.microsoft.com/kb/297185/ja
  • pentium100
  • ベストアンサー率45% (689/1517)
回答No.1

多分いろいろ検索されたことかと思いますがそのメッセージは簡潔に言うと  「ハードディスクにダメージがあって読めないよん」 ってことです。 多分ここのページも読まれたかと思います。 http://www.ironhearts.com/diary/archives/001476.html で、 「回復コンソール」を起動して「CHKDSK /R」を行うことまでは 多分検索すれば出てくるので分かっていらっしゃると思います。 それで、いまフロッピーを買おうかと胃ところなのですね。 http://lets-go.hp.infoseek.co.jp/kaihuku.html こちらのページに、CD-Rで起動ディスクを作成する方法が書かれています。 参考になさってください。 CD-Rからの起動の場合はBIOSの設定で 起動順位をCD(DVD)ドライブが1位になるよう設定する必要があります。 しかし、これをやったからといって10%回復できる保証はありません。HDDにダメージ食らってますから。 最終的には新しいHDDに交換後、 リカバリをかけることも視野に入れておくべきでしょうね。

関連するQ&A

  • XPが起動できない

    普通に使っていたのですが、突然ブルー画面で「A probem has been detected and windows has been shut down to prevent damege to your computer. UNMOUNTABLE_BOOT_VOLUME If this screen appears again, follow these steps: check to make sure any new hardware of software is proberly installed. If this is a new installation, ask your hardware of sortware manufacturer for any windows update you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select safe mode. Technical information: *** STOP: 0x000000ED (0x82FEB3D8, 0xC0000006, 0x00000000, 0x00000000)」となり、以降セーフモードも含めてWindowsが起動できなくなりました。松下のCF-W2ですが、リカバリDVDがないのでオークションで探しています。どうしたら良いか、回復方法を教えて下さい。

  • windows xpに関して質問です。

    windows xpに関して質問です。 起動中に、パソコンがジーっと音をたて、突然フリーズしバックがブルーの画面になります。 そこに以下の様な文章が書かれています。 A problem has been detected and windows has been shut down to prevent damage to your computer. KERNEL_STACK_INPAGE_ERROR If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again,follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe Mode to remove or disable components, restart your computer,press F8 to select Advanced Startup options, and then select safe memory. 文章は以上です。 何か設定で改善出来るのでしょうか?

  • 起動しようとすると、青い画面に英語でズラ~っと文字が出てきて止まってしまいます

    DELLのINSPIRONというノートPCを使っています。 2~3日前から、起動しようとすると青い画面になり英語でずら~っと文字が出てきたきり、止まってしまいます。 何度試しても同じで全く使えません。どうしたら良いでしょうか・・。 出てくる英語の文字は A problem has been detected and windows has been shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME If this is the first time you've seen this stop error screen. restart your computer.If this screen appears again,follw these steps: Check to make sure any new hardware or software is properly installed.If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select safe mode. Technical information: STOP: 0×000000ED(0×8571B5F0,0×C0000006,0×00000000,0×00000000) と、出ています。長々とすみません・・。やっぱり故障でしょうか・・。困っています。

  • ノートパソコンを起動すると…

    ノートパソコンを起動すると たまに下のような英文が出てきます。 そして、ウィンドウズが起動しません。 どなたかパソコン&英語に詳しい方お願いします。 check to make sure any new hardware or software is properly installed. if this is a new installation, ask your hardware of software manufacturer for any windows updates you might need. run the driver verifier against any new ( or suspect ) drivers. if that doesn't reveal the corrupting driver,try enabling special pool . both of these features are intended to catch the corruption at an earlier point where the offending driver can be identified. if you need to use safe mode to remove or disable components,restart your computer , press F8 to select advanced startup options , and then select safe mode. if this is the first time you've seen this stop error screen , restart your computer. if this screen appears again,follow these steps: check to make sure any new hardware or software is properly installed. if this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. if problems continue,disable or remove any newly installed hardware or software . disable bios memory options such as caching or shadowing. if you need to use safe mode to remove or disable components, restart select safe mode . technical information: パソコンは 日立のPriusで、OSはXPです。

  • XPが起動しません;;

    始めまして。 パソコンのことで困ってますのでお願いします;; いつもどうりにパソコンを立ち上げようと思って、電源をいれると   セーフモード   セーフモードとネットワーク   セーフモードとコマンドプロンプト   前回正常起動時の構成(正しく動作した最新の設定)   windowsを通常起動する」 というような画面がでてきて、どれを選択してもブルーの画面で problem has been detected and windows has been shut down to prevent da,age to your computer. UNMOUNTABLE_BOOT_VOLUME If this is the first time you've seen this stop error screen,restart your computer,If this screen appears again,follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows updates you maight need. If problems continue,disable or remove any newly installed hardware or software. Disabele BIOS memory options such as caching or shadowing.If you need to use safe Mode to remove or disable components,restart your computer,press F8 to select Advanced startup options,and then select safe mode. Technical information: stop:0x000000ED (0x80D38410,0xC000009C,0x00000000,0x00000000) というように表示がでてそこからまったく動かなくなります。 「マイクロソフトオフィスXPパーソナル」というCDをドライブに いれ起動するんですがうまくいきません。 パソコンを初期の状態に戻すにはどうしたらよいでしょうか;; どなたか宜しくお願いします。 ************************* 本体:NEC VALUESTAR 型番:PC-VL300/3D O S:WINXP

  • パソコン起動時にわからない英語だらけで動きません

    パソコン画面にこのような文字が出ました。移してみましたが、どのような意味でしょうか。深刻な気がしますが・・・ A problem has been deteeted and windows haabeen shut down to prevent damage to your computer. driver_1RQL_Not_Less_or_EQUL It this is the first time you've seen this stop error screen, restart your computer.If this screen appears again,follow these steps. check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing. If you need to use safe mode to remove or disable comonents,restart your computer,press F8 to select advanced start up options, and then select safe mode. Technical information stop ~? Begnning dump of physical memory 間違いの文字があるかもしれませんが、このような事が書かれてありました。 宜しくお願いします。

  • パソコンがうまく起動しません

    初めまして、この数日同じような症状が頻繁に出て困っています。どなたかお教えいただけたらと思います。 インターネット接続中、急にパソコンがフリーズし、画面が青いバックに白文字で英文が出ます。大体の内容は「a problem has been detected and windows has been stut down to prevent damage to your computer KERNEL-DATA-INAGE-ERROR. If this in to first time you’re seen this stop error screen. Restart your computer.,if this screen appears again. follow those stops check to make sure any new hardware or software is properly installed . If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue ,disable or remove any newly installed hardware or software disable BIOS memory options such as caching or shadowing. If your need to use safe mode to remove or disable components,restart your computer,press F8 to select advancsd startup options,and then select safe mode. Technical infor mation といった内容です。強制終了させ、再起動しても黒い画面に白い文字が数行でてそこから動かなくなります。 何度か終了再起動を繰り返すと、通常に起動することもありますが、それでもこの3日で5回ほど同じ症状が出ました。同じような症状になる方、又は解決方法をご存知の方がいましたら教えていただきたいのですが…お願いいたします。

  • BIOSを元にもどす方法

    現在、DELLのInspiron530を使っているのですが、 BIOSのバージョンを1.00から1.05にバージョンアップしたら、 パソコンをスリープ状態から起動するたびにBlueScreenになり、  A problem has been detected and windows has been shut down to prevent damage to your computer.   BAD_POOL_CALLER  If this is the first time you've seen this stop error screen,restart your computer.If this screen appears again,follow these steps:  Check to make sure any new hardware,or software is properly installed.   If this is a new installation, ask your hardware or software, manufacturer for any windows updates you might need.  If problems continu,disable or remove any newly installed hardware or software.  If problems continue, disable or remove any newly installed hardware or software.  Disable BIOS memory options such as caching or shadowing.  If you need to use safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select safe mode. (以下略) という表示が出て、強制再起動になる、という症状が出るようになってしまいました。 できれば以前のバージョンにもどしたいのですが、どうやれば戻すことができるのかわかりませんでした。 だれかわかる人いたら教えてください(>_<)

  • パソコンが起動しない

    先ほども質問させて頂きましたが、説明不足だと思ったのでもう一度質問します。 電源を入れると青い画面になり英語で以下のようなことが書いてありました。 A Problem has benn detected and windows has been shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME If this is the first time you've seen this stop error screen, restrart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly intalled hardware or software. disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable componernts, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: STOP: 0×000000ED(0×81788640, 0×C0000032,0×00000000, 0×00000000) それでセーフモードでためしてやってみたのですが、びくともせずまたこの画面に戻ってしまいます。 もう手のうちようはないでしょうか? 回答よろしくおねがいします。

  • パソコンが急にブルー画面になり再起動します

    パソコンが急にブルー画面になり再起動してしまいます。昨日も同じブルー画面になり再起動しました。 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: iaStor.sys If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x70860002 (0x00000003, 0x00000002, 0x00000017, 0x00000000) *** iaStor.sys - Address 0x8bc5ee47 base at 0x8bc01000 DateStamp 0x4b071eec とでてきて再起動します。 パソコンはwindows7です。