• ベストアンサー

PCが再起動してしまう

最近PCを使っていると急に再起動してしまうことがよくあります。 「システムのプロパティ」の「起動と回復」から「自動的に再起動する」のチェックを外してみて、ブルーバックで以下のようなメッセージが出てきました。 A problem has been detected and Windows has been shut down to prevent damage to your computer. MEMORY_MANAGEMENT If this is the first time you've seen this stop errorscreen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installation hardware or software. Disable BIOS memory options such as caching orshadowing. If you need to use Safe Mode to remove or disablecomponents, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical information: *** STOP: 0x0000001A ( 0x00000780, 0xC060F400, 0x81A27F0, 0x000004C0) Begining dump of physical memory Phisical memory dump complete. Contact your system administrator or technicalsupport for further assistance. (スペルミスがあったらすみません…) 使用しているのはVALUESTAR-SR PC-VR500BDという機種で、OSはXP SP2です。 ウイルス対策ソフトとしてはウイルスバスター2006を使用していて、ウイルスの検索をしましたが何も出ませんでした。 他にフリーのSpybot-Search&Destroy、Symantecのオンラインスキャンをしてみましたが何も出ませんでした。 どうすれば良いのでしょうか?

質問者が選んだベストアンサー

  • ベストアンサー
  • holly0201
  • ベストアンサー率39% (127/324)
回答No.2

ブルーバック現象が起きる原因は多くあり、エラーコードで多少の限定はできますが、完全ではありません。 私の良くやる順番として・・・(そうそうあることではありませんが) (1)メモリチェック http://shattered04.myftp.org/pc_38.html (2)ディスクチェック (3)各種ドライバ更新・ロールバック (4)マザーボード電池抜き・CMOSクリア (5)OS復元(私はバックアップソフト使用) (6)OS再インストール 今回のエラーについてはメモリの可能性が高い気がするのですが・・・

franz002
質問者

お礼

メモリチェックをやってみたのですがエラーは出なかったのですが、ディスクチェックをしたら治ったみたいです。 ありがとうございました。

その他の回答 (3)

回答No.4

まず、こういう場合はネットでエラーコードを検索するとよいです。 http://support.microsoft.com/default.aspx?scid=kb;ja;271955 ここに乗っているのは、「RAM(メモリ)を交換してください。」とのことです ほかのところを調べても、メモリのことなのでメモリを交換することをお勧めします。 http://www.kt.rim.or.jp/~aotaka/faq/win169.htm

franz002
質問者

お礼

返信ありがとうございます。 チェックしてみましたがメモリには特に問題は無かったみたいです。

noname#47429
noname#47429
回答No.3

ハードウェア最小構成で起動

回答No.1

その画面はOS以前なのでハードでしょう。 最近新しい機器を追加したならそれが悪さしているかも。 ソフト的にでなく、電気的に。 一度全部繋がっているものを抜いて、コンセントも抜いてみては。 たまにコネクタに静電気が溜まってることもあります。

franz002
質問者

お礼

つい先ほどまでコンセントを全て抜いてPCを休ませていたのですが、起動してみたらまた再起動してしまいました。 どうやら原因は違うみたいです。

関連するQ&A

  • PCが立ち上がらなくなってしまい、困っています2

    先日ブルースクリーン?で困って質問した者です。 英字の内容を書きます。この場合、直るでしょうか? A problem has been detected and windows has been shut down to provent damage to your computer. UNMOUNTABLE_BOOT_VOLME If this is the first time you've seen this stop errer screen, restart your computer.If this screen appears again,follw these steps:check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows up dates you might need. If problems continue,disable or remove any newly installed hardware or software.Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components,restart your computer,press F8 to select Adovanced start up options,and ther select safe mode. Technical information:STOP:0x000000ED(0x865C5C08,0x0000006,0x00000000,0x00000000)

  • PC起動できません。

    最近PCの調子が悪く、前日にリカバリをかけたのですが、ある程度進んだ段階の再起動時点からブルースクリーンが表示されて、通常起動が出来なくなりました。 電源入れ直してセーフモードや修復選択にするも、 またブルースクリーンになってしまいます。 表示↓ A problem has been detected and windows has been shut down to prevent damage to your computer. CLFS.SYS PAGE_FAULT_IN_NONPAGED_AREA If this is the first time you've seen this stop error screen,restart your computer.If this screen appears again,follow these steps: Check to make sure any new hardware or software is properly installed.If this is a new installation.ask your hardware or software manufacturer for any windows updates you might need. If problems continue.disable or remove any newly installed hardware or software.Disable BIOS memory options such as catching or shadowing.If you need to use safe mode to remove or disable components.restart your computer,press F8 to select Advanced startup Options,and then select safe mode. Technical information: ***STOP:0x00000050(0x902FF018,0x00000000,0x8042C367,0x00000000) *** CLFS.SYS - Address 8042C367 base at 8042B000,DateStamp 4549acbc 以上。 どうすればいいのか全く解りません(汗)教えてください。

  • pcの電源をつけたらWindowsが起動する代わりに青いバック画面に白

    pcの電源をつけたらWindowsが起動する代わりに青いバック画面に白い文字の英文が出てきました。対処方法がわからないので英文の訳をお願いいたします。 check to make sure any new hardware or software is properly installed . If this is a new insatllation, ask your hardware or software manufacturer for any windows updates you might need. If preblems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components,restart your computer, press F8 to select Advaced startup options,and then select safe Mode. Technical infomation: stop: 0x0000C1F5 (0x00000000,0x00000000,0x00000000,0x00000000)  長くてすみません。 宜しくお願いいたします。

  • 起動しません・・・・助けてください!

    パソコンがフリーズしたので 強制終了をし、再度立ち上げようと思ったら 青い画面に英文が書かれており起動できなくなりました。セーフモードでも動きません・・・・・・ 大事なデーターがある為リカバリはしたくありません。どうか助けてください。お願いします。 ■パソコン:FUJITSU ■機種:BIBLO NB9/90R ■OS:Win XP Home ■英文: a problem has been detected and windows has been shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME if this is the first time youve seen this stop error screen,restart your computer.if this screer appears again,follow these steps: check to make sure any new hardware or software is properly installed. if this is a new installation ask your hardware or software manufacturer for any windows updates you might need. if problems continue,disable or remoue any newly installed hardware or software.disable bios memory options such as caching or shadowing. if you need to use safe mode to remove or disable select advanced startup options and then select technical infor mation: STOP:0x000000ED(0X817885D98,OXC0000032,0X00000000,0X00000000

  • パソコンが起動しない

    先ほども質問させて頂きましたが、説明不足だと思ったのでもう一度質問します。 電源を入れると青い画面になり英語で以下のようなことが書いてありました。 A Problem has benn detected and windows has been shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME If this is the first time you've seen this stop error screen, restrart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly intalled hardware or software. disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable componernts, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: STOP: 0×000000ED(0×81788640, 0×C0000032,0×00000000, 0×00000000) それでセーフモードでためしてやってみたのですが、びくともせずまたこの画面に戻ってしまいます。 もう手のうちようはないでしょうか? 回答よろしくおねがいします。

  • 起動不能のPCからバックアップを取る事は可能?

    コンピューターについて詳しい方、非常に困っているのでどうぞよろしくお願い致します。今年の5月30日に愛用のラップトップPC(Dynabook A1/X10PMC)が故障してしまい、以下のような青い画面が起動時に出てきました。 A problem has been detected and windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: e100b325.sys An attempt was made to write to read-only memory. If this is the first time you've seen this stop errir screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup options, and then select Safe mode. Technical Information: *** STOP: 0x000000BE (0xF70CBE30, 0x09402121, 0x80535FD8, 0x0000000A) *** e100b325.sys - Address F70C20F8 base at F70B3000, Datestamp 3b264b35

  • PC壊れた?!

    ウィンドウズを終了させてやり忘れたことを思い出してスグにまた電源を入れたら、おかしな事になってしまい今、次の英文が出た状態で止まってます…分かる単語が少なくて困ってます。。。誰か対処法を教えて下さい。 A problem has been detected and windows has been shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again,follw these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need tu use safe Mode to remove or disable components ,restart your computer,press F8 to select Advanced startup Options,and then select safe Mode. Technical information: ***stop:0x000000ED(0x81351E30,0xC0000006,0x00000000,0x00000000) ここまでです。 これを読んで対処法が分かる方、パソコンに疎い私でも分かるように教えていただけたらありがたいです。 最後の行の文字はゼロかオーかは、分かりません… 保存しておいた画像とか消えてるんでしょう…それは仕方ないと諦めます… また使えるようになれば、それでいいです… osはwindows XPです。

  • パソコンが急にブルー画面になり再起動します

    パソコンが急にブルー画面になり再起動してしまいます。昨日も同じブルー画面になり再起動しました。 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: iaStor.sys If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x70860002 (0x00000003, 0x00000002, 0x00000017, 0x00000000) *** iaStor.sys - Address 0x8bc5ee47 base at 0x8bc01000 DateStamp 0x4b071eec とでてきて再起動します。 パソコンはwindows7です。

  • パソコン起動時にわからない英語だらけで動きません

    パソコン画面にこのような文字が出ました。移してみましたが、どのような意味でしょうか。深刻な気がしますが・・・ A problem has been deteeted and windows haabeen shut down to prevent damage to your computer. driver_1RQL_Not_Less_or_EQUL It this is the first time you've seen this stop error screen, restart your computer.If this screen appears again,follow these steps. check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing. If you need to use safe mode to remove or disable comonents,restart your computer,press F8 to select advanced start up options, and then select safe mode. Technical information stop ~? Begnning dump of physical memory 間違いの文字があるかもしれませんが、このような事が書かれてありました。 宜しくお願いします。

  • 起動中にブレーカーが落ちて、それから起動しない・・・。

    同じような質問がありましたが、それでもわからないので質問します。 2週間前に初めての自作デスクトップPCを作り、windows xp pro をインストールして使っていました。 今日、パソコンを起動中にブレーカーが落ちてしまいました。 それから下のような文が青い画面に出て、それ以上進みません。 a Problm has been detected and windows has been shut down to prevent damage to your computer. DRIVER_IROL_NOT_LESS_OR_EQUAL if this is the first time you've seen this stop error screen. restart your computer.if this screen appears again follow these steps: check to make sure any new hardware or software is properly insalled. if this is a new installation,ask your hardware or software manufacturer for any windows updutes you might need. if prablems continue,disable or remove any newly installed haredware or software. Disable BIOS memory options suchas caching or shadowing. if you need to use safe Mode to remove or disable components,reatart your computer,press F8 to select Advanced startup options,and then select safe Mode. Technical information: STOP:0x000000ED(0x81FDE900,0x⊂00000032 0x0000000,0x00000000 そこでセーフモードで起動しようとしたのですが、上と同じ画面が出てきます。 これはハードウェアやソフトウェアがダメになってしまったということでしょうか? また、この状態でwindows xpを再インストールするにはどうすればいいのでしょうか? バイオス設定でCDROMを最初に読み込むようにして、セットアップCDを入れているはずなんですが、インストール画面にならないんです。 わかる方、いましたら教えてください。