• 締切済み

起動しません・・・・助けてください!

パソコンがフリーズしたので 強制終了をし、再度立ち上げようと思ったら 青い画面に英文が書かれており起動できなくなりました。セーフモードでも動きません・・・・・・ 大事なデーターがある為リカバリはしたくありません。どうか助けてください。お願いします。 ■パソコン:FUJITSU ■機種:BIBLO NB9/90R ■OS:Win XP Home ■英文: a problem has been detected and windows has been shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME if this is the first time youve seen this stop error screen,restart your computer.if this screer appears again,follow these steps: check to make sure any new hardware or software is properly installed. if this is a new installation ask your hardware or software manufacturer for any windows updates you might need. if problems continue,disable or remoue any newly installed hardware or software.disable bios memory options such as caching or shadowing. if you need to use safe mode to remove or disable select advanced startup options and then select technical infor mation: STOP:0x000000ED(0X817885D98,OXC0000032,0X00000000,0X00000000

みんなの回答

noname#62848
noname#62848
回答No.3

Win Meの起動フロッピーがあれば、DOSからfdiskコマンドでマスターブートレコード(MBR)を書き戻してブートできるようになる可能性があります。 以前XPでブート中の電源落ちで起動不能になったDiskが復活できました。 http://homepage2.nifty.com/winfaq/fdiskhowto.html#fdisk4

  • junra
  • ベストアンサー率19% (569/2863)
回答No.2

ブートセクターのクラッシュかと思います。 データはハードデスクを取り外して別のPCでデータは読めるはずです。 物理的故障でないのでデータのリカバリーはできるはずです。 終わりましたらハードを元に戻してクリーンインストールしてください

  • PCFREAK
  • ベストアンサー率51% (417/805)
回答No.1

これは既にHDDが故障した可能性もありますね。 データはもうダメかもしれませんよ。 HDDを取り外して別PCで(USB接続などで)コピーしてみるという方法が考えられます。但しHDDが既に故障していれば無理ですので、ダメ元でどうぞ。

beijing0329
質問者

補足

USB接続をするにはSCSIの変換ケーブルを買えば出来ますか?

関連するQ&A

  • XPが起動できない

    普通に使っていたのですが、突然ブルー画面で「A probem has been detected and windows has been shut down to prevent damege to your computer. UNMOUNTABLE_BOOT_VOLUME If this screen appears again, follow these steps: check to make sure any new hardware of software is proberly installed. If this is a new installation, ask your hardware of sortware manufacturer for any windows update you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select safe mode. Technical information: *** STOP: 0x000000ED (0x82FEB3D8, 0xC0000006, 0x00000000, 0x00000000)」となり、以降セーフモードも含めてWindowsが起動できなくなりました。松下のCF-W2ですが、リカバリDVDがないのでオークションで探しています。どうしたら良いか、回復方法を教えて下さい。

  • パソコンが急にブルー画面になり再起動します

    パソコンが急にブルー画面になり再起動してしまいます。昨日も同じブルー画面になり再起動しました。 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: iaStor.sys If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x70860002 (0x00000003, 0x00000002, 0x00000017, 0x00000000) *** iaStor.sys - Address 0x8bc5ee47 base at 0x8bc01000 DateStamp 0x4b071eec とでてきて再起動します。 パソコンはwindows7です。

  • 青い画面が出て、起動しません

    Win XP homeeditionを使っています。電源スイッチを入れると次のような青い画面が表示されて、起動しません。 A problem has been detected and windows has been shut down to prevent damage to your computet. UNMOUNTABLE_BOOT_VOLUME Check to make sure any new hardware or software is properly installed.If this a new installation, ask your hardware of software manufacture for any windows updates you might nees. If problems continue, disable or remove any newly installed hardware or software, Disable BIOS memoly options such as caching or shadowing.If you need to use safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then aelect safe Mode: Technical inforemation: *** STOP: 0x000000ED (0x8171A3B0,0xC0000006,0x0000000,0x0000000) セーフモードで立ち上げると、やはりこの青い画面が出ます。

  • PCが立ち上がらなくなってしまい、困っています2

    先日ブルースクリーン?で困って質問した者です。 英字の内容を書きます。この場合、直るでしょうか? A problem has been detected and windows has been shut down to provent damage to your computer. UNMOUNTABLE_BOOT_VOLME If this is the first time you've seen this stop errer screen, restart your computer.If this screen appears again,follw these steps:check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows up dates you might need. If problems continue,disable or remove any newly installed hardware or software.Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components,restart your computer,press F8 to select Adovanced start up options,and ther select safe mode. Technical information:STOP:0x000000ED(0x865C5C08,0x0000006,0x00000000,0x00000000)

  • 起動しようとすると、青い画面に英語でズラ~っと文字が出てきて止まってしまいます

    DELLのINSPIRONというノートPCを使っています。 2~3日前から、起動しようとすると青い画面になり英語でずら~っと文字が出てきたきり、止まってしまいます。 何度試しても同じで全く使えません。どうしたら良いでしょうか・・。 出てくる英語の文字は A problem has been detected and windows has been shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME If this is the first time you've seen this stop error screen. restart your computer.If this screen appears again,follw these steps: Check to make sure any new hardware or software is properly installed.If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select safe mode. Technical information: STOP: 0×000000ED(0×8571B5F0,0×C0000006,0×00000000,0×00000000) と、出ています。長々とすみません・・。やっぱり故障でしょうか・・。困っています。

  • ブルースクリーン現象になりました

    質問をさしてもらい ブルースクリーン現象ということが分かり (対処の仕方がわかりません) BlueScreenView を使い (何個かありましたが数が多かったので何個かはりました) ブルースクリーンのところを抜き出してみました ハードディスクのバックアップはとらなくても大丈夫でしょうか A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x9589a9b8, 0x00000002, 0x00000000, 0x82ebb60b) *** ntkrnlpa.exe - Address 0x82e4ffd9 base at 0x82e02000 DateStamp 0x4cb710d6 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x00000000, 0x0000001b, 0x00000000, 0x82e95c94) *** ntkrnlpa.exe - Address 0x82e9bfd9 base at 0x82e4e000 DateStamp 0x4cb710d6 三つめ A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe CACHE_MANAGER If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information:

  • ブルー画面のエラーで先に進みません

    ブルー画面で下のようなエラーが出ます。エラーの意味と対処法を教えて下さい。(セーフモードでも起動不可能でした) A problem has been detected and windows has been shut down to prevent damage to your computer.UNMOUNTABLE_BOOT_VOLUME If this screen appears again,follow these steps;Check to make sure any new hardware or software is properly installed.If this is a new installation,ask your hardware or software manufacturer for any waindows updates you might need.If problem continue,disable or remove any newly installed hardware or software.Disable BIOS memory options such as caching or shadowing.If you need touse Safe Mode to remove or disable components,restart your computer,press F8 to select Advanced Startup Options,and then select Safe Mode. Technical Information;***STOP:0x00000ED(0x80EB33C8,0xC0000032,0x00000000)

  • パソコンで青い画面

    パソコンで青い画面になってしまい。次のようなメッセージです どこがおかしいのか さっぱりわかりません。ご指導宜しくお願いします。 初心者ですので 可能な限り手順も教えてください。 A problemhas been detectedand windows has been shut down to prevent dama to your computer. MACHINE_CHECK_EXCEPION if this is the first time you've seen this stop error screen. restart your computer. If this screen appears again,follow these steps: check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware of software.Disable BIOS memore options such as caching or shadowing If you need to use safe mode to remove or disable components restart select safe mode. Technical information *** STOP:0x0000009C(0X00000004,0X80548EF0,0x82000000,0X00070F0F) Beginning dump of physical memory

  • 何度もブルースクリーンが…

    ここ最近、パソコンをしばらく放っておくと、必ずと言ってよいほどブルースクリーンになります。 以下のようなエラーメッセージが出るのですが、これはOSを再インストールするべきなのでしょうか? それとも、すでに寿命なのでしょうか…。 英語を訳してみたものの、イマイチ意味がわからず、もしお詳しい方がいらっしゃいましたら、ぜひ教えて頂ければ幸いです。。。 a problem has been detected and windows has been shut down to prevent damage to your computer. a process or thread crucial to system operation has unexpectedly exited or been terminated. If this is the first time you've seen this stop error screen,restart your computer.If this screen appears again,follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacture for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software.Disable BIOS memory options such as caching or shadouwing. If you need to use Safe Mode to remove or disable components,restart your computer,press F8 to select Advanced Startup Options,and then select Safe Mode. Technical information stop: 0x000000F4 0x00000003 0x8A554850 0x8A5549c4 0x805D49B4 Beginning dump of physical memory

  • WindowsXPのクリーンインストールが出来ない。

     Windowsをクリーンインストールしようとしたのですが、 A problem has been detected and windows has been shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new harfware or softwareis properly installed. If this is a new installation, ask your hardware or software marufacturer for any windows updates you might need. If problems continue, disable or remove any rewly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Safe Mode. Technical information: *** STOP: 0x000000ED (0x8474c468, 0x00000000, 0x00000000) と、表示されてセットアップ画面にいきません。