• ベストアンサー
※ ChatGPTを利用し、要約された質問です(原文:Windows7 64がインストール出来ません)

Windows764がインストールできません

このQ&Aのポイント
  • 新たに購入したHDDにWindows764ビットをインストールしようとしたが、進行中に青画面が表示される。
  • 旧HDDにはXPが入っており、試しても同じ状態になる。
  • 青画面の内容は『the driver is mismanaging system PTEs.』と表示される。

質問者が選んだベストアンサー

  • ベストアンサー
  • parts
  • ベストアンサー率62% (6364/10149)
回答No.1

PTEsというのは、ページテーブルエントリーのことと思われます。 メモリ空間の初期割り当て処理において何らかの不整合が生じたと思われます。 まず、BIOSの設定でPAE/PSEなどに関する設定があれば、それらの設定を有効なら無効に、無効なら有効に変更することで改善する可能性があります。 また、メモリに損傷があるかどうかを確認することをお奨めします。BIOSで正常に認識しているかどうか、メモリチェックツールなどでメモリが破損していないかどうかなどもチェックするのが妥当でしょう。 この質問を読む限り、Windows 7 64bitを導入するために、メモリを継ぎ足したりしていませんか? その場合は、そのメモリを疑うか、BIOSのメモリ空間設定に問題があると思われます。 BIOSに問題がなければ、メモリを以前の状態に戻して様子を見て、正常に動くかどうかを確認されるか、4GB以下で動作するかを確認することをお奨めします。 それでも正常に動かないなら、根が少し深い(厄介なハードウェア障害の)可能性があります。

hilitesuki
質問者

お礼

ありがとうございました。 1G×2の方を取り外し2G×2をメモリ診断しました。 診断が終わり再起動後そのままインストール出来ました。 インストール後再度1G×2を付けましてメモリ診断した所、エラー無しと表示されたので そのまま6Gで運用してます。

全文を見る
すると、全ての回答が全文表示されます。

その他の回答 (2)

noname#135638
noname#135638
回答No.3

メモリーを一枚だけさしてインストールしてみてはいかがですか?

hilitesuki
質問者

お礼

インストール出来ました。 ありがとうございました。

全文を見る
すると、全ての回答が全文表示されます。
  • 8ive22ty
  • ベストアンサー率52% (770/1479)
回答No.2

同じような現象を経験したことがあります。 私の場合はメモリ不良でした。 原因: 従来も潜在的に不良部分が存在していたのだが、それまではその領域にアクセスすることがなかったので顕在化しなかった。 新しいOSインストール時に、それまでは使用していないメモリ領域を使用することになったフェーズで(段階で)不良が顕在化した。 確認: Win7インストールDVD起動でメモリテストを行なうと不良部分が確認できた。 対応: 不良箇所のメモリだけを取り替えてOKになった。 ---

hilitesuki
質問者

お礼

ありがとうございました。 通常では使用しない領域と言うのでしょうか? 今回の診断では不良無しと出ましたが、あるのかもしれませんね。 とても参考になりました。

全文を見る
すると、全ての回答が全文表示されます。

関連するQ&A

  • OSインストール中のエラー

    Windows XPのインストール中に青画面になり OSのインストールが途中で止まってしまいます。 最初は正常にインストール出来たのですが HDDをフォーマットしている時に電源を落としてしまいました。 Windows起動した後に青画面になる事から 再度OSを入れ直しにかかったものです。 (現在はWindows起動しません) どなたか原因と対処法が解ればご助言下さい。 A prpblem has been detected and Windows has been shut down to prevent damage to your computer. PAGE_FAULT_IN_NONPAFED_AREA If this is the first time you've seen this stop error screen, restart your computer. If this screen. appears again, follow these steps: Check to make sure any new hardware of software is propely installed, If this is a new installation, ask your hardware of software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe Mode to remove or disable components, restart your computer,press F8 to select Advanced startup options, and then select Safe mode. Technical information: STOP:0X00000050(0XE52c5A0c,0X00000000,0X8041E022,0X00000002)

  • windows xpに関して質問です。

    windows xpに関して質問です。 起動中に、パソコンがジーっと音をたて、突然フリーズしバックがブルーの画面になります。 そこに以下の様な文章が書かれています。 A problem has been detected and windows has been shut down to prevent damage to your computer. KERNEL_STACK_INPAGE_ERROR If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again,follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe Mode to remove or disable components, restart your computer,press F8 to select Advanced Startup options, and then select safe memory. 文章は以上です。 何か設定で改善出来るのでしょうか?

  • WindowsXPのクリーンインストールが出来ない。

     Windowsをクリーンインストールしようとしたのですが、 A problem has been detected and windows has been shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new harfware or softwareis properly installed. If this is a new installation, ask your hardware or software marufacturer for any windows updates you might need. If problems continue, disable or remove any rewly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Safe Mode. Technical information: *** STOP: 0x000000ED (0x8474c468, 0x00000000, 0x00000000) と、表示されてセットアップ画面にいきません。

  • インストールできない

    いろいろあってpcのデータをすべて消去してしまったので新たにwindows2000(製品版)をインストールしたらこんな画面になったのですがどうすればいいのでしょうか? 以前からいつもインストールの途中でフリーズしてちゃんとインストールできた試しがありません。どうかよろしくお願いします。 *** STOP : 0x0000000A (0xC182DFE8,0x00000002,0x00000001,0x80445492)IRQI._NOT_LESS_OR_EQUAL *** Address 80445492 base at 80400000, DateStamp 384d9b17 - ntoskrnl.exe If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check to male sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows 2000 updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. Check your hard drive to make sure it is properly configured and terminated. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Refer to your Getting Started manual for more information on troubleshooting Stop errors.

  • シャットダウン時に青画面+英文

    買って半年も経っていないノートパソコンなのですが、昨日シャットダウンしようとしたところ、なかなかシャットダウンされず私はそのまま寝てしまいました。ところが今日の朝起きてみると、青画面に大量の英文が映し出されていて、とても慌てました。画面には A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen restart your computer. If this screen appears again,follow these steps. Check to make sure any new hardware or software is properly installed.If this is anew installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadwing. If you need to use safe mode to remove or disable computers,restart your computer,press F8 to select Advanced startup options,and then selest safe mode. と表示されていました。 機械的な面にはあまり詳しくないので、どうしてよいかわからず、とても困っています。よろしくお願いします。

  • windows2000の青画面について

    不要なレジストリをフリーソフトのRegseekerで削除したあと再起動したらwindows起動後青画面が出て全く動かない状態になってしまいました。 エラーコード等で検索したのですが見つかりません。 セーフモードで起動しても青画面がでる状態です。 どうか解決法のご教授お願いします。 とりあえずエラーメッセージの全文載せておきます ***STOP:0x00000050(0xA02DF000,0x00000001,0xA00C9FF5,0x0000000) ***Address A00C9FF5 base at A0000000,DateStamp 4344ef76 - win32.sys If this is the first time you've seen this Stop error screen,restart your computer. If this screen appears again,follow these steps: Check to make sure any new hardware or software is properly installed. If this a new installation,ask your hardware or software manufacturer for any Windows 2000 updates you might need. If problems continue,disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components,restart your computer,press F8 to select Advanced Startup Options,and then select Safe Mode. Refer to your Getting Started manual fo move information on troubleshooting Stop errors.

  • 再インストールが出来ません a problem has been~(代理)

    WinXPsp1を再インストールしようと思ったのですが いざやってみると以下の英文がすぐに表示されて止まってしまいます。(止まるのは使用条件に同意したあとくらいで止まります)何が原因でどうすれば解決するのでしょうか? ご教授よろしくお願いいたします。 a problem has been detected and windows has been shut down to prevent damage to your computer IROL_NOT_LESS_OR_EQUAL If this is the first time you`ve seen this stop error screen restart your computer If this screen appears again follow these steps check tomake sure any new hardware or software is properly installed If this is a new installation ask your hardware or software manufacture for any windouws updates you might need if problems continue disable or remove any newly installed hardware or software disable BIOS memory options such as caching or shadowing if you need to use safe mode to remove or disable components restart your computer press F8 to select Advanced startup options and then select safe mode Technical information この英文の後に stop:0xooxooxAみたいな英字が表示されます

  • Windows7 ブルースクリーンについて

    先日PCを自作したのですが、シャットダウンするときに100%ブルースクリーンになります。 画面には下記のように表示されます。 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: PAGE_FAULT_IN_NONPAGED_AREA If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x00000050 (0xfffff888037f9428, 0x0000000000000000, 0xfffff880037f680a, 0x0000000000000005) *** - Address 0x0000000000000000 base at 0x0000000000000000 DateStamp 0x00000000 いろいろ調べて、試してみてもなかなか有効な解決方法がが見つかりません。 解決するために御助力していただけたら幸いです。 どうかよろしくお願いしますm(_ _)m

  • pcの電源をつけたらWindowsが起動する代わりに青いバック画面に白

    pcの電源をつけたらWindowsが起動する代わりに青いバック画面に白い文字の英文が出てきました。対処方法がわからないので英文の訳をお願いいたします。 check to make sure any new hardware or software is properly installed . If this is a new insatllation, ask your hardware or software manufacturer for any windows updates you might need. If preblems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components,restart your computer, press F8 to select Advaced startup options,and then select safe Mode. Technical infomation: stop: 0x0000C1F5 (0x00000000,0x00000000,0x00000000,0x00000000)  長くてすみません。 宜しくお願いいたします。

  • BIOSを元にもどす方法

    現在、DELLのInspiron530を使っているのですが、 BIOSのバージョンを1.00から1.05にバージョンアップしたら、 パソコンをスリープ状態から起動するたびにBlueScreenになり、  A problem has been detected and windows has been shut down to prevent damage to your computer.   BAD_POOL_CALLER  If this is the first time you've seen this stop error screen,restart your computer.If this screen appears again,follow these steps:  Check to make sure any new hardware,or software is properly installed.   If this is a new installation, ask your hardware or software, manufacturer for any windows updates you might need.  If problems continu,disable or remove any newly installed hardware or software.  If problems continue, disable or remove any newly installed hardware or software.  Disable BIOS memory options such as caching or shadowing.  If you need to use safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select safe mode. (以下略) という表示が出て、強制再起動になる、という症状が出るようになってしまいました。 できれば以前のバージョンにもどしたいのですが、どうやれば戻すことができるのかわかりませんでした。 だれかわかる人いたら教えてください(>_<)