• ベストアンサー

よろしくお願いします。

kentan384の回答

  • kentan384
  • ベストアンサー率35% (781/2203)
回答No.3

Technical information 0x0000008E ドライブがビジーであることを示しています。 現在、移行または、接続が実行できません。この現象が、エラーを引き起こしています。 また、作業途中でのブルースクリーンは、障害を取り除くために再起動を要求するものです。(そのことは、英文中には書かれていませんが) とはいっても放置はできません。 原因として考えられるのは BIOS → Windows がスムースに行われていない。 HDDが劣化している。 システム(ドライバを含む)に異常がある。 そのほかにもありそうですが、私が思いつくのは、この程度です。 まず試すべきは、リカバリでしょうね。 それでだめなら、故障も考えなくてはなりません。 が リカバリで改善できるものと思います。 起動できている様子なので、データを吸出し、設定などをバックアップするなりメモするなりして思い切って リカバリすることをお勧めします。

関連するQ&A

  • 助けてください!!

    助けてください!! いきなりこの画面になってしまいました(>_<) キーボードを押してもなにも起こりません。 至急解決策を押してください!! A problem has been detected and widows has been shut down to prevent dameage to your computer If this is the first time you've seen this stop error screen,restart your computer If this screen appears again,follow these steps: check to be sure you have adequate disk space.If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. check with your hardware vendor for any BIOS updates.Disable BIOS memory options such as caching or shadowing.If you need to use safe mode to remove or disable components,restart your computer,press F8 to select advanced startup options,and them select safe mode. technical information: stop: 0x0000007E (0xC0000005,0x81E2087E,0x8B5CBA30,0x8B5CB72C) 詳しく手順を教えてください!!

  • エラーメッセージ

    ちょっと長くなりますがエラーメッセージを書くので対処方法を教えてください。 A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these stops. Check to be sure you have adequate disc space. If a drive is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any Bios updates. disable BIOS memory options such as caching or shadowing. if you need to uses safe Mode to remove or disable components, restart your computer, prees F8 to select Advanced startup options, and the select safe mode. このメッセージが出て勝手にwindowsが再起動します。 何が原因でしょうか?

  • エラーメッセージ

    パソコンを使用中に背景が真っ青になって 下記のようなメッセージが出てきたのですが、 何をすれば良いのかわからず対応できません。 どうやって対処すればいいのでしょうか? これが出てきたメッセージです。 A problam has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again,follow these steps: check to be sure you have adequate disk space. If a driver is identified in the stop message,disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to nse safe Mode to remove or disable components. restart your computer,press F8 to select Advanced Start up options,and thenselect safe mode Technical information: STOP:0x0000008E(0xoooooo5,0x8058E8ED,0xF34B3C8C,0x00000000) Beginning dump of phisical memory

  • 操作途中で、電源が突然落ちてしまう

    WindowsXPを使っています。パソコンのメーカーはソーテックです。キーボードをたたいたり、マウスを動かしている最中に、電源が突然落ちてしまい、青地に白の文字で、次のような文章が出てきます。 A oroblem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again, follow these steps: check to be sure you have adequate disk space. If a driver is identified in the stop message,disable the driver or check with the manufacturer for driver updates. Try changing video adapters. check with your hardware vender for any BIOS updates. Disable BIOS mjemory options such as cachinp or shadowing. If you need to use safe mode to remove or disable componennts, restart your select safe mode. 電源オプションは「常にオン」にしています。ADSLにつないでいます。Yahoo!BBです。 何をいじればいいか分からないので、是非教えてください。

  • 自作PCで青い画面が出てしまう

    自作PCで作業をしていると時々青い画面が出てPCがとまってしまいます。 ----------------------------------------------- A problem has been detected and Windows has been shut down to prevent damage to your computer. if this is the first time you've seen this stop error screen, restart your computer.If this screen appears again,follow these steps; Check to be sure you have adequate disk space. If a driver is identified in the Stop message,disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer,press F8 to select Advanced Startup Options, and then select safe mode. ----------------------------------------------- 表示される内容は上の通りなのですが、翻訳してみても今ひとつ何をすればいいのか分かりません。どなたかアドバイスのほうをお願いいたします。

  • 再インストール

    パソコンに電源を入れたまま、少し放っておくとブルーバックになってフリーズしてしまいます。 そのため、OSを再インストールしようとしているのですが、VISTAのロムをセットして電源を入れて、画面下にWINDOWSのバーが動いた後、ブルーバックになります。 内容は、 A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced startup Options, and then select Safe Mode. Technical infomation: *** STOP: 0x0000008E (0xc0000005,0x89168c15,0x808030D4,0x0000000) と、出ております どうすれば再インストールできるのでしょうか?

  • パソコンが壊れた?

    パソコンを起動したら、青い画面に下の文章が表示されて動作しなくなりました。 セーフモードにして復元しても、また同じように青い画面にこの文章が出てきます。 壊れたんでしょうか? どのように修理したらいいでしょうか? A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps : Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates.Try changeing video adapters. Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. Ifyou need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced startup options, snd then select safe mode. Technical informations *** STOP:

  • 起動ディスクを入れるとエラーが起きます

    起動ディスクを1~6を入れて6枚目を入れると 青画面になってこういうメッセージが出ます。 BIOSを更新した方がいいのでしょうか? 知識不足なので分かる方教えてください。 A problem has been detected and windows has been shut down to prevent damage to your computer. IF this is the first time you've seen this stop error screen, restart your computer.If this screen appears again, follow these steps: Check to be sure you have adequte disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any BIOS updates.Disable BIOS memory options such as caching or shadwing.If you need to use Safe Mode to remove or disable components,restart your computer,press F8 to select Advanced Stratup Options,and then select Safe Mode. STOP:0x000007E(0xc0000005,0xF7768DCE,0xF7C7903C,0xF7C78038) acpi.sys - Address F7768DCE base at F7754000,DateStamp 41107d27

  • PCが再起動を繰り返す

    PC-VT900D5 Windows XP SP2 最近PCが再起動を繰り返し、以下のメッセージが表示されます。 A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again. follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup options, and then select Safe Mode. Technical information: *** STOP: 0x0000008E(0xC0000005,0x624F0C02,0xEF85723C,0x00000000) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further assistance. Windowsの自動アップデートをしてからおかしいようです、 Windows XP アップデートを削除すれば直るのでしょうか? PCの修理が必要でしょうか? よろしくお願いします。

  • ブルースクリーンについて

    最近ブルースクリーンが出るようになって困っています。 メッセージは次のとおりです。 A problem has been detected and windows has been shutdown to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps. Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe mode to remove or disable components. restart your computer, press F8 to select Advanced start up options, and then select safe mode. Technical information *** stop:0x0000008E(0x0000006,0xFA25F4B4,0xF207B940,0x00000000) *** NaiFiltr.sys-Address FA25F4B4 baseatFA25c000,Datestamp 3acb718a Beainning dump of physical memory physical memory dump complete.contact your system administra toror technical support group forfurther assistance. どなたか対処方法がわかるかたよろしくお願いします。 OSはXPです。