- 締切済み
fedoraでUSBメモリーがマウントできない
fedora16を使っていますが、 ある時急にUSBHDDやフラッシュが使えなくなりました。 電源入れる前にデバイスを刺しておけば、 認識はしていますが、 クリックすると「Error mounting: mount: unknown filesystem type 'vfat'」 と出ます。 マウントコマンドは使えませんでした。 何か良い方法があったら教えていただけると助かります。
- みんなの回答 (8)
- 専門家の回答
関連するQ&A
- USBフラッシュメモリのマウント
USBフラッシュメモリのマウントをしたのですが、 スペシャルデバイス /dev/sda が存在しませんと出たのですが、 どういうことなんでしょうか? よろしくお願いします。 # mkdir /mnt/usbfm # mount -t vfat /dev/sda /mnt/usbfm mount: スペシャルデバイス /dev/sda が存在しません。
- 締切済み
- Linux系OS
- USBデバイスのマウントについて
FedoraCore3を使用しております。 USBデバイスのマウントが出来ずに困っています。 ELECOMのMRーDU2A7SVというカードリーダーライターを使っています。 http://www2.elecom.co.jp/peripheral/memory-rw/mr-du2a7/index.asp dmesgコマンドで確認してみるとデバイス認識はしているようなのですが。。。 scsi3 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning Vendor: GENERIC Model: USB Storage-CFC Rev: 016A Type: Direct-Access ANSI SCSI revision: 00 Attached scsi removable disk sda at scsi3, channel 0, id 0, lun 0 [root@localhost ~]# mount -t vfat /dev/sda /mnt/usbfmとすると次のようなメッセージになります。 mount: メディアが見つかりません リーダーライターにはSDカードが挿してあります。 他のメデイアはないので試していません。 同じ作業でUSBのフラッシュメモリは認識できました。 どうすれば認識できるようになるのでしょうか? よろしくお願いします。
- ベストアンサー
- Linux系OS
- knoppix(クノーピクス)でのUSBフラッシュメモリのマウント
コンピュータ関連のことなのですが、knoppixのEdu5を起動後USBフラッシュメモリを接続し、右クリックからマウントしようとしても エラー:mount:noneが指定されましたがファイルシステムタイプを決定できません というメッセージがでてマウントされません。 その後シェルから $ sudo -s # mount -o rw -t vfat /dev/sda /mnt/sda と入力すると/mnt/sdaにマウントされるのですが、ファイルの変更ができません(書き込めません)。 書き込みができる状態でのマウント方法を教えてください。
- 締切済み
- その他([技術者向] コンピューター)
- LINUX8でのUSBマウント方法を・・・
LINUX8でのUSBマウントのコマンド mount /mnt/usb /dev/hdb1 と打ったのですが「ブロックディバイスではありません」と表示されました。どうやったらUSBをマウントできるのでしょうか?知っている方いたら教えていただけませんか?ちなみにIDEディスクです。 よろしくお願いします。
- ベストアンサー
- Linux系OS
- マウント関数について
こんばんは。 linux初心者で困っています。助けてください。 USBのマウントの方法でわからないことがあります。 組み込みなので、コマンドではなくて、mount関数でUSBをマウントしたく、 下記の関数を使おうとおもっているのですが、 #include <sys/mount.h> int mount(constchar* source ,constchar* target , constchar* filesystemtype ,unsignedlong mountflags , constvoid* data ); それぞれの引数に具体的にどんな値を設定していいのかわかりません。 ( mount(/dev/sda1,/mnt/usb/,vfat,MS_RDONLY)とやってみたらエラーでした・・・) 具体的な設定方法をご教授願います。 また、そもそもmount関数ではなく、system関数でコマンドを実行した方がいいのでしょうか? よろしくお願い致します。
- ベストアンサー
- Linux系OS
- CentOS7で外付けHDDがマウントできない。
Error mounting /dev/sdc1 at /run/media/kouzou/51D711784E198DBA: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sdc1" "/run/media/kouzou/51D711784E198DBA"' exited with non-zero exit status 32: mount: unknown filesystem type 'ntfs' 上記のようなメッセージが出てマウントできません。 何かいい方法はないでしょうか? ご回答のほど、宜しく御願い申し上げます。
- ベストアンサー
- Linux系OS
- USBフラッシュメモリがマウントできない
RedHat9を使用しています。 USBフラッシュメモリをマウントしようとしています。Googleやこの「教えて!goo」で検索したところ、 # mkdir /mnt/usbfm # mount -f vfat /dev/sda /nmt/usbfm でマウントできるという事を知りました。しかし、/dev/sdaは環境によって様々なので、マウント先を変える必要性があることは認識しています。 以下の2点で調べてみました。 1) dmesg hub.c: new USB device 00:1d.7-4 assigned address 6 WARNING: USB Mass Strage data integrity not assured USB Mass Strage device found at 6 どこにマウント先の記述があるかわかりません・・・ 2) tail -f /var/log/messages 日時 localhost /etc/hotplug/usb.agent: Setup usb-storage for USB product d7d/1600/100 日時 localhost devlabel: devlabel service started/restarted という表示でこちらもどこにマウント先の記述があるのか・・・? USBフラッシュメモリもFAT32でフォーマットされています。もしかして、USBが正しく認識していないのでは?と思ったりしていますが、メッセージにはそれらしい物が出ていますし。 一応、/dev/sdaや/dev/sda1,sda2,sdbなど試しました。 初心者で申し訳ありませんが、ご存知の方ご教授お願いします。
- ベストアンサー
- Linux系OS
- コンパクトフラッシュのマウント
コンパクトフラッシュのバックアップ作成したいです。 旧CFはCent OSに新CFはUSB+リーダーでVineにつないでます。 新CFをfdiskで旧CFと同じようパーティションに切りました、フォーマットもしました。 fdisk -l でそれぞれのパーティションは見えてます。 しかし、マウントポイントを作り、それぞれのマウントしようとしてもマウントできません。 /sbin/fdisk -l /dev/sdc1 とすると、 Disk /dev/sdc1: 7999 MB, 7999884288 bytes 247 heads, 62 sectors/track, 1020 cylinders Units = シリンダ数 of 15314 * 512 = 7840768 bytes デバイス Boot Start End Blocks Id System /dev/sdc1p1 1 13 99510 83 Linux /dev/sdc1p2 14 996 7526831 83 Linux と出ます。 mount /dev/sdc1p1 /hoge1 nfs としましたが、 Usage: mount -V : print version mount -h : print this help mount : list mounted filesystems mount -l : idem, including volume labels So far the informational part. Next the mounting. The command is `mount [-t fstype] something somewhere'. Details found in /etc/fstab may be omitted. mount -a [-t|-O] ... : mount all stuff from /etc/fstab mount device : mount device at the known place mount directory : mount known device here mount -t type dev dir : ordinary mount command Note that one does not really mount a device, one mounts a filesystem (of the given type) found on the device. One can also mount an already visible directory tree elsewhere: mount --bind olddir newdir or move a subtree: mount --move olddir newdir A device can be given by name, say /dev/hda1 or /dev/cdrom, or by label, using -L label or by uuid, using -U uuid . Other options: [-nfFrsvw] [-o options] [-p passwdfd]. For many more details, say man 8 mount . となり、うまくマウントできません。 /devを確認すると、sdc1はあるのですが、sdc1p1がありません。 どうしたら、それぞれのパーティションをマウントできるでしょうか。
- 締切済み
- その他([技術者向] コンピューター)
- linuxブートイメージをUSBにコピー
過去の質問を見ても解決できなかったので質問します。 ddコマンドでブートパーティション最初のセクタの512Bをコピーして # mkdir /mnt/usbmem # mount -t vfat /dev/sd** /mnt/usbmem を入力します。 そうするとUSBのランプが点灯するので 認識はされていると思うのですがうまくいきません。 mount: Mounting /dev/sd* on /mnt/usbmem failed: Invalid argument と出力されます。 原因が全くわからないので、分かる方ご教授お願いします。
- ベストアンサー
- Linux系OS
- knoppixでusbマウント
古いHDDからUSBにknoppixで移動したところ、windowsで見ると文字化けしていた為、マウント解除してターミナル・エミュレータで"http://puttosimasuyo.blog.so-net.ne.jp/2012-01-19-4"のサイトに載っている手順通りに、マウントしたのですが、まだ文字化けしています・・(゜-゜) しかも、変なメッセージ(?)が出てきたので、何か間違えているのかもしれません。 このメッセージの意味を教えていただきたいです↓(所々スペル間違いがあると思います・・) Usage: mount -V : print version mount -h : print this help mount : list mounted filesystems mount -l : idem,including volume labels So far the informational part. Next the mounting. The command is 'mount [-t fstype] something somewhere'. Details found in /etc/fstab may be omitted. mount -a : [-t | -0] ... : mount all stuff from /etc/fstab mount device : mount device at the known place mount directory : mount known device here mount -t type dev dir : ordinary mount command Note that one does not really mount a device ,one mounts a file system(of the given type)found on the device. One can also mount an already visible directory tree elsewhere: mount --bind olddir newdir or move a subtree: mount --move olddir newdir One can change the type of mount containing the directory dir: mount --make -shared dir mount --make -slave dir mount --make -private dir mount --make -unbindable dir One can change the type of all the mounts in a mount subtree containing the directory dir: mount --make-rshared dir mount --make-rslave dir mount --make-rprivate dir mount --make-runbindable dir device can be given by name, say/dev/hda1 or /dev/cdrom, or by label,using -L lavel or by uuid, using -U uuid. other options:[ -nfFrvw] [-o options] [-p passwdfd]. For many more details,say man 8 mount.
- ベストアンサー
- Linux系OS
お礼
申し訳ありません。 質問の仕方も良くわかっていなかったと自覚しております。 また、回答を待ちながらも いろいろ試して行くうち、 混乱してしまった部分もあり、 意味不明な感じになってしまいました。 申し訳ないです。