• 締切済み

HDMIでPCとTVを接続(グラフィックボードが認識できてない??)

HDMIでPCとTVを接続するために購入しました。(ゲーム用ではありません) PCを起動して最初の画面に下記の文字が映ります。 Attention Unsupported Video Configuration Detected. Action is required this Compter has an add-in graphics card , but the moniter cable is plugged into the integrated video connector. To attach the mointor cable to the add-in graphics card 1 Shut down the Computer 2 Plug the monitor cable into the add-in graphics card connector. This may require a video adapter or video adapter cable. (Provided with the system) 3 Turn on the Computer This massage should not appear after completing these steps. For more information or help , Please refer to the system documentation. 小生の環境 PC:DELL inspiron 530s OS:Vista Home Edition CPU:Core2duo メモリ:2G TV:東芝REGZA42Z8000 追加グラフィックボード:GT9400 GV-94--N94T-512I 現在の接続状況 TV---PC---モニタ  ↑   ↑   HDMI  D-SUB F1を押すとそのままPCの画面は映りますが TVは映りません。コンパネより、画面の設定を確認しましたが、 TV(HDMIポート)は認識していないようで、 選択できるモニタは1つだけです。 電源出力・相性も購入先の方も「大丈夫」との太鼓判を押していただいていたのですが、 不安になってきました。 日中は仕事のため、外出先からサポートデスクにtelしても、 手元に自分のPCがない為、 手ごたえを感じられません。 どなたか、アドバイスの程よろしくお願いいたします。

みんなの回答

  • D-Matsu
  • ベストアンサー率45% (1080/2394)
回答No.2

たぶんD-Subをオンボードの方から取ってる。 前々から思ってるんですがDELLのBIOSメッセージって親切ですよねぇ。 普通は何も言わずにただ無効にするんですが。

回答No.1

 どういう状況かはPC が英語で通知しています。今は翻訳サイトも充実してきているので、読めなくても自分で訳す努力をしなさい。  ケーブルの接続に問題があるという内容です。接続状況の確認と、ケーブルの不良の確認をするべきでしょう。

関連するQ&A

  • PC届いたのに、モニタをグラフィックカードへ接続がわかりません。

    新品DELLパソコンを店頭担当者に構成見てもらい購入商品届き、喜んでケーブルを差込電源ON♪しかし…立ち上がってすぐに…次のメッセージで、動きが止まってしまいます。店頭で本体にはビデオカードが有りますが、このモニタ側にはDVI端子を搭載してないのでデジタル接続は出来ないとは聞いています。どうしたら良いか、教えてください。 Attention:Unsuppported Video Configuration Detected Action is Bequired This is computer has add-in graphics card,but the monitor cable is plugged to attach the monitor cable to add-in graphics card: 1.Shut down the computer 2.Plug the monitor cable into the add-in graphics card connector.This may requir a or video adaputer cable. (provided with the system) 3.Turn on the computer.

  • グラフィックカードを認識しなくて、困っています。

    グラフィックカードを認識しなくて困っています。 購入したパソコンはDELL製で Inspiron 530 プレミアムパッケージ Windows Vista(R) Ultimate 32ヒ゛ット CPU Core(TM) 2 Duo フ゜ロセッサー E6750 (4MB L2 キャッシュ、2.66GHz、1333MHz FSB) メモリ 2GB(1GB x2) デュアルチャネル DDR2-SDRAM ビデオカード NVIDIA(R)GeForce(R) 8600 GT 256MB (DVIx2/TV-out付) ハードディスク 320GB SATA 3.0Gb/s NCQ HDD PC起動時に以下のような注意書きがでます。 Attention: Unsupported video configuration Detected Action is Required. This computer has an add-in graphics card. but the moniter cable is plugged into the integrated video connector. To attach the moniter cable to the add-in graphics card. Plug the moniter cable into the add-in graphics card connector. This way require a video adapter or video adapter cable. どうか御教授願います。

  • グラフィックカードの取り付け後の起動トラブル

    使用PC:DELL/Dimension 5150c(スリムPC) 取り付けたいグラボ:GALAXY/7300GT-LP(D-SUB、DVI端子) グラフィックカードの取り付けに初めて挑戦したのですが PCI Express×16に取り付けてグラボについてるD-SUB端子と モニター接続したら画面が写りません。 グラボのファンは回っています。 一旦、電源を切りパソコン本体のD-subとモニター接続したら ファンは回りだし、こんな画面が出ました system halted! Attention: Unsupported Video Configuration Detected Action is Required This computer has an add-in graphics card, but the monitor cable is plugged into the integrated video connector. To attach the monitor cable to the add-in graphics card 1. shutdown the computer 2.plug the monitor cable into the add-in graphics card connect. This may require a video adapter or Video adapter cable. (Provided with the system) 3.Turn on The computer. this message should not after completing these steps. For more information or help, please Refter system documentation >This computer has an add-in graphics card, but the monitor cable is plugged into the integrated video connector. To attach the monitor cable to the add-in graphics card って検索したら、モニターケーブルを差す場所が違うよって メッセージで変換コネクタを使えば解決するそうなのですが、 何の変換コネクターを使えばいいのでしょうか?

  • PCを立ち上げるとモニタにエラーが出る

    買ったばかりの新しいPCを今まで使えていたモニターに接続すると 以下のメッセージが最初に出てきてそれ以上先に進めません。 パソコンはDELL社のDimension C521 AMD Athlon(TM) モニタはノーブランドのCRTです。 パソコン側の差込口がMiniDsub15ピンでモニタのケーブルも同じ 形状です。モニタはさっきまで古いPCで問題なく使えていました。 エラーメッセージは以下のとおりです。 よろしくお願いします。 Unsupported Video Configuration Detected This computer has an add-in graphics card , but the monitor cable is plugged into the integrated video connector. To attach the monitor cable to the add-in graphics card, play the monitor cable into the add-in graphics card connector. This may require video adapter or video adapter cable.

  • 毎回英語の画面が出て困っています

    毎回起動するたびに英語が書いてある画面が出て困ってます。 F1を押すと普通に起動するので使えるのですが、この画面の意味がわからないので教えてください Attention: Unsupported Video Configuration Detected Action is Required This computer has an add-in graphics card, but the monitor cable is plugged into the integrated video connector. To attach the monitor cable to the add-in graphics card: 1. Shut down the computer. 2. Plug the monitor cable into the add-in graphics card connector. This may require a video adapter or video adapter cable.(provided with the system) 3. Turn on the computer. This message should not appear after completing these steps. For more information or help, please refer to the system docmentation.

  • 先日、デル製のデスクトップpcを購入したのですが…

    初心者すぎる質問です… 先日、デル製のデスクトップpcを初めて購入したのですが、 (このpcは貰い物ノート) 全部ケーブルをつなぎ、電源を入れると this compute has an add-in graphics card but the nonitor cabel is plugged into the integrated video connector to attach the nonitor cable to the add-in graphics card plug the monitor cable into the add-in graphics card connector this may require a video adapter or video adapter cable(provided with the system) のような文が出てきてできません。 読む限りビデオケーブルなるものをどこかに差し込まなくてはいけない みたいですが…モニタにはもう差す穴はないし、付属品に余ってるケーブルもないんです。説明書を見ても載ってません… ビデオケーブルというのは普通別売りなんですか? また、モニタにはつなぐ必要はないんですか? ビデオケーブルというのはいくつかありますよね?どれでも変わらないのでしょうか? 英文の解釈間違ってませんよね? 複数の質問、長文申し訳ございません… なにぶん初心者ですので詳しく説明していただけると非常に助かります(泣) 最後まで読んでいただきありがとうございました。 何卒、御教授お願いいたします。

  • 起動すると・・・

    先日パソコンを譲り受け、自宅でマウスやキーボード等の配線を繋ぎ起動したところ System halted! Floppy diskette seek failure Attention:Unsupported Video Configuration Detected Action is Required This computer has an add-in graphics card, but the monitor cable is plugged into the integrated video connector. To attach the monitor cable to the add-in graphics card: 1.Shut down the computer 2.Plug the monitor cable into the add-in graphics card connector. This may require a video adapter or video adapter cable. (provided with the system) 3.Turn on the computer. This message should not appear after completing these steps. For more information or help,please refer to the system documentation. このようなメッセージが表示され、画面は止まったままでした。 これはどうしたら良いのでしょうか。 OSはインストール済です。よろしくお願いいたします。

  • DELLの表示後エラー表示で起動しません

    Dimension C521 購入後、最初に電源ボタンを入れDELLの表示が出た後いきなり Attention Unsupported Video Configuration Detectedと表示、 This computer has an add-in graphics card, but the monitor cable is plugged into the integrated video connector. To attach the monitor cable to the add-in graphics card と表示。 BENQのモニターでは、上記の表示がされましたが、テレビで接続しなおして見たら、まったく画面表示すらできませんでした。 何がおかしいのかまったくわからない初心者です。 どなたか、詳しい方おられましたら教えていただければ助かります。

  • ビデオカードがインストールできない!

    オンボードのビデオカード:Intel(R) G33/G31 Express Chipset Family 購入したビデオカード:GF8400GS-LE256H/HS デュアルモニタにするべく、ビデオカードを購入し早速、PCに接続させて電源を入れると以下のような画面がでました。 Action is required. this computer has an add-in graphics card, but the monitor cable is plugged into the integrated video connector. To attach the monitor cable to the add-in graphics card. 1.Shut down the computer. 2.Plug the monitor cable into the add-in graphics card connector. This may require a video adapter or video adapter cable. (provided with the system) 3.Turn on the computer. Thismessage should not appear after completing these steps. For more information or help, please refer to the system documentation. 文の中に、モニターケーブルを増設したビデオカードのコネクタに接続させろ、とあったので接続させてみましたが、 画面は映りませんでした。 また、ドライバをインストールするため、付属のCDを入れてインストールしようと思ったら、 An unsupported operation was attempted. this application has requested the runtime to terminate it in an unusual way. please contact the application's support team for more infomation. と表示され、インストールできませんでした。 どうすれば解決するのでしょうか。 よろしくお願いいたします。

  • DELL Dimension 4700C

    DELL Dimension 4700Cを買ったのですが モニターを接続するとエラー?がでます どうしたら直りますか? このような文字がでてきます。 All Rights Reserved Dell System Dimension 4700c Series BIOS version A03 www.dell.com Keyboard failure Attention: Unsupported Video Configuration Detected Action is Required This computer has an add-in graphics card, but the monitor cable is plugged into the integrated video connector. To attach the monitor cable to the add-in graphics card: 1. Shut down the computer 2. Plug the monitor cable into the add-in graphics card connector. This may require a video adapter or video adapter cable. (provided with the system) 3. Turn on the computer. This message should not appear after completing these steps. For more information or help, please refer to the system documentation. System halted! どうすればいいでしょうか? お願いします