• ベストアンサー

HDDにXPをインストール出来ません。

rebmevonの回答

  • rebmevon
  • ベストアンサー率21% (37/172)
回答No.2

ビデオカードを外してインストールしてみてはどうでしょうか。

LittleBP
質問者

お礼

回答ありがとうございました。メモリーの交換で解決いたしました。

LittleBP
質問者

補足

回答ありがとうございます。まだ試していませんでした。(自宅のパソコンなので)帰宅後 試してみます。

関連するQ&A

  • WindowsXPのクリーンインストールが出来ない。

     Windowsをクリーンインストールしようとしたのですが、 A problem has been detected and windows has been shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new harfware or softwareis properly installed. If this is a new installation, ask your hardware or software marufacturer for any windows updates you might need. If problems continue, disable or remove any rewly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Safe Mode. Technical information: *** STOP: 0x000000ED (0x8474c468, 0x00000000, 0x00000000) と、表示されてセットアップ画面にいきません。

  • windows xpに関して質問です。

    windows xpに関して質問です。 起動中に、パソコンがジーっと音をたて、突然フリーズしバックがブルーの画面になります。 そこに以下の様な文章が書かれています。 A problem has been detected and windows has been shut down to prevent damage to your computer. KERNEL_STACK_INPAGE_ERROR If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again,follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe Mode to remove or disable components, restart your computer,press F8 to select Advanced Startup options, and then select safe memory. 文章は以上です。 何か設定で改善出来るのでしょうか?

  • インストールできない

    いろいろあってpcのデータをすべて消去してしまったので新たにwindows2000(製品版)をインストールしたらこんな画面になったのですがどうすればいいのでしょうか? 以前からいつもインストールの途中でフリーズしてちゃんとインストールできた試しがありません。どうかよろしくお願いします。 *** STOP : 0x0000000A (0xC182DFE8,0x00000002,0x00000001,0x80445492)IRQI._NOT_LESS_OR_EQUAL *** Address 80445492 base at 80400000, DateStamp 384d9b17 - ntoskrnl.exe If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check to male sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows 2000 updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. Check your hard drive to make sure it is properly configured and terminated. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Refer to your Getting Started manual for more information on troubleshooting Stop errors.

  • 再インストールが出来ません a problem has been~(代理)

    WinXPsp1を再インストールしようと思ったのですが いざやってみると以下の英文がすぐに表示されて止まってしまいます。(止まるのは使用条件に同意したあとくらいで止まります)何が原因でどうすれば解決するのでしょうか? ご教授よろしくお願いいたします。 a problem has been detected and windows has been shut down to prevent damage to your computer IROL_NOT_LESS_OR_EQUAL If this is the first time you`ve seen this stop error screen restart your computer If this screen appears again follow these steps check tomake sure any new hardware or software is properly installed If this is a new installation ask your hardware or software manufacture for any windouws updates you might need if problems continue disable or remove any newly installed hardware or software disable BIOS memory options such as caching or shadowing if you need to use safe mode to remove or disable components restart your computer press F8 to select Advanced startup options and then select safe mode Technical information この英文の後に stop:0xooxooxAみたいな英字が表示されます

  • BIOSを元にもどす方法

    現在、DELLのInspiron530を使っているのですが、 BIOSのバージョンを1.00から1.05にバージョンアップしたら、 パソコンをスリープ状態から起動するたびにBlueScreenになり、  A problem has been detected and windows has been shut down to prevent damage to your computer.   BAD_POOL_CALLER  If this is the first time you've seen this stop error screen,restart your computer.If this screen appears again,follow these steps:  Check to make sure any new hardware,or software is properly installed.   If this is a new installation, ask your hardware or software, manufacturer for any windows updates you might need.  If problems continu,disable or remove any newly installed hardware or software.  If problems continue, disable or remove any newly installed hardware or software.  Disable BIOS memory options such as caching or shadowing.  If you need to use safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select safe mode. (以下略) という表示が出て、強制再起動になる、という症状が出るようになってしまいました。 できれば以前のバージョンにもどしたいのですが、どうやれば戻すことができるのかわかりませんでした。 だれかわかる人いたら教えてください(>_<)

  • Windows XP

    ここ最近、Windowsを開こうとすると、青い画面が出てきます。 「 A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Run a system diagnostic utility supplied by your hardware manufacturer. In particular, run a memory check, and check for raulty or mismatched memory. Try changing video adapters. Diseble or remove any newly installed hardware and drivers. Disable or remove any newly installed software. If you need o use safe mode to remove or disable components, restart your computer, press F8 to select Advanced startup options, and then select safe mode. Technical information: STOP: 0×0000007F  ( 0×0000000D, 0×00000000, 0×00000000, 0×00000000)  」 と英語が書いてあります。 3日経っても直りません。 心当たりがあると言えば、iTunesがエラーになったので、アンインストールの手続きをしたことです。 どうやったら直りますか? お願いします。

  • シャットダウン時に青画面+英文

    買って半年も経っていないノートパソコンなのですが、昨日シャットダウンしようとしたところ、なかなかシャットダウンされず私はそのまま寝てしまいました。ところが今日の朝起きてみると、青画面に大量の英文が映し出されていて、とても慌てました。画面には A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen restart your computer. If this screen appears again,follow these steps. Check to make sure any new hardware or software is properly installed.If this is anew installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadwing. If you need to use safe mode to remove or disable computers,restart your computer,press F8 to select Advanced startup options,and then selest safe mode. と表示されていました。 機械的な面にはあまり詳しくないので、どうしてよいかわからず、とても困っています。よろしくお願いします。

  • HDD交換後のOSのインストールについて・・

    自作PCのデスクトップです。 CPU : Celeron 000/128/188/1.7V SL4TF マザーボード : ABIT SE6 HDD : IO DATE 40GB OS : win2000pro HDDが壊れてしまい起動しなくなったので、新しくIO DATE 40GB のHDDを付けました。 新しくOSをインストールしたいのですが、SET UP~・・の表示の後に *** STOP: 0x000000C2 (0x00000041,0x8186E000,0x0000FEEF) BAD_POOL_CALLER If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follw these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows 2000 updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe mode. Refer to your Getting Stated manual for more information on troubleshooting Stop errors. という表示が出てコレ以上進めません。 交換やインストール等した事のない初心者で、色々調べながらやっている状態です。 フォーマットやBIOSの設定・・・というのもどうやったらよいか解からず変えていません。 些細な情報でも良いので教えて頂けたらと思います・・・。 宜しくお願いします。

  • OSインストール中のエラー

    Windows XPのインストール中に青画面になり OSのインストールが途中で止まってしまいます。 最初は正常にインストール出来たのですが HDDをフォーマットしている時に電源を落としてしまいました。 Windows起動した後に青画面になる事から 再度OSを入れ直しにかかったものです。 (現在はWindows起動しません) どなたか原因と対処法が解ればご助言下さい。 A prpblem has been detected and Windows has been shut down to prevent damage to your computer. PAGE_FAULT_IN_NONPAFED_AREA If this is the first time you've seen this stop error screen, restart your computer. If this screen. appears again, follow these steps: Check to make sure any new hardware of software is propely installed, If this is a new installation, ask your hardware of software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe Mode to remove or disable components, restart your computer,press F8 to select Advanced startup options, and then select Safe mode. Technical information: STOP:0X00000050(0XE52c5A0c,0X00000000,0X8041E022,0X00000002)

  • パソコンで青い画面

    パソコンで青い画面になってしまい。次のようなメッセージです どこがおかしいのか さっぱりわかりません。ご指導宜しくお願いします。 初心者ですので 可能な限り手順も教えてください。 A problemhas been detectedand windows has been shut down to prevent dama to your computer. MACHINE_CHECK_EXCEPION if this is the first time you've seen this stop error screen. restart your computer. If this screen appears again,follow these steps: check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware of software.Disable BIOS memore options such as caching or shadowing If you need to use safe mode to remove or disable components restart select safe mode. Technical information *** STOP:0x0000009C(0X00000004,0X80548EF0,0x82000000,0X00070F0F) Beginning dump of physical memory