• ベストアンサー

ACPIのシステムエラーがでます

DOS/V初心者です。 数日前、ABITのマザーボードBD72(845Eチップ)を組みましたが、数時間使うといきなり落ちて次のようなエラーがでます。 A problem has been detected and windows has been shut doun to prevent damage to your computer. If this is the first time youre seen this stop error screen,restart your computer. If this screen appears again,follow these steps. The BIOS in this system is not fully ACPI compliant. please contact your system vendor or visit http://www.hardware-update.com for an updated BIOS. If you are unble to obtain an updated BIOS or the latest BIOS supplied by your vendor is not ACPI conpliant, you can turn off ACPI mode during text mode setup. TO do this,simply press the F7 key when you are prompted to install storage drivers. The system will not notify you that the F7 key was pressed it will silently disable ACPI and allow you to continue your installation. Technical in formation: ***stop:0X000000A5(0X00000011,0X00000007,0XF7AC60C0,0X0100000C) 私、語学は中一レベル。どうしたらいいんでしょう? BIOSはアワード・OSは98SEをクリーンインストールして即XPホームにUPしました。メモリー512M(PC2700)+512M(PC2100)2本差し。(あまりよくないと思いますが、1Gで認識してます)CPU2.0AGHz。電源SWを切り、投入するとXPの起動方法選択画面になりますので、その度に通常起動で使ってます。

  • w2002
  • お礼率78% (18/23)

質問者が選んだベストアンサー

  • ベストアンサー
  • amanojack
  • ベストアンサー率45% (116/256)
回答No.3

そのエラーコードからですと恐らくメモリ関連のエラーではないでしょうか? メッセージの内容は、ACPIはBIOSが対応していないのでアップグレードを求めています。 BIOSのバージョンを確かめてください。 ABITのサイトでは、最新が2.31(2002/05/03)となってるようです。 BIOS更新する時は、自己責任で、またパーツは最小構成でしてください。 更新してもだめな場合は、BIOSでACPIを無効に出来ると思いますが、どうでしょう?

参考URL:
http://www.abit.com.tw/abitweb/webjsp/english/download_content.jsp?pTITLE=BD7II+%2F+BD7II-RAID&#Bios
w2002
質問者

お礼

ありがとうございます。 BIOSバージョンUPしてますね。すぐに結果はでないと思いますが、新しいモデルなのでOKかなと思ってました。 それでだめならBIOSにあるACPI Mode:ですか。

その他の回答 (2)

noname#47429
noname#47429
回答No.2

>自作なら、なぜWINXPをクリーンでインストールしないの。 何もデバイスドライバのアップグレードに余分な時間を使うWIN98からアップする必要がないですよ。  98は98。そしてWINXPをクリーンインストール。 やり直し。 メモリも1枚はずして。9x系OSでは逆に不具合の原因になります。 何の為に+512ですか。  参考にしたいので教えてください。・・・

w2002
質問者

補足

今は後悔。少しでも出費を減らそうと前機(今は不動)の98とXPアップグレードパッケージを使用。 2枚差しは、強制終了やOS終了時に不安が有りましたが、画像の複数起動やバイキュービック高解像度などが快適なので使ってました。 でも普段は+512は不要ですね。 とりあえず1枚にしてみます。

  • Hiyuki
  • ベストアンサー率36% (2604/7183)
回答No.1

Win9x系統からのアップグレードはお勧めしません。 Xpからのクリーンインストールを行ってください。 ただ、ACPIがどうこうという話なので、もしかしたら新しいBIOS待ちになるかもしれません。 それと、Xpを入れたあとに、INFユーティリティーを入れた方がいいかもしれません。

参考URL:
http://downloadfinder.intel.com/scripts-df/Detail_Desc.asp?ProductID=816&DwnldID=4364
w2002
質問者

お礼

ありがとうございます。 色々試して見ます。お手数お掛けました。

関連するQ&A

  • 急にACPIのエラーメッセージがでるようになってしまいました

    設定を変えていないのに、起動中にブルー画面になって以下のメッセージがでるようになってしまいました。 再インストールすれば、直るとは思うんですが、再インストールなしで起動するようにする方法はありませんか? *** STOP: 0x000000A5 (0x00000001,0x8207F4C8,0x00000000,0x00000000) The ACPI BIOS in this system is not fully compliant with the ACPI specification.Please read the README.TXT for possible workarounds. You can also contact your system's manufacturer for an updated BIOS, or visit http://www.hardware-update.com to see if a new BIOS is available. The BIOS in this system is not fully ACPI compliant. Please contact your system vendor or visit http://hardware-update.com for an updated BIOS.If you areunable to obtain an updated BIOS or the latest BIOS supplied by your vendor is not ACPI conpliant,you canturn off ACPI mode during text mode setup. To do this,simply press the F7 key when you are prompted to install storage drivers. The system will not nofify you that the F7 key was pressed - it will silently disable ACPI and allow you to continue your installation.

  • stopエラー 0x000000A5  が出ます!

    知人に質問されたのですがあいまいな答えしか出ないため みなさんのお力をお借りしたく質問いたします。 状況を見たわけではないのではっきりしていませんが、よろしくお願いいたします。 【経緯】 HD故障により、起動しなくなったPCのHDを入れ替えて新規にリカバリーディスクによりウィンドウズXPの再インストールを行い、起動しようとしていますが下記のエラーメッセージによりインストールができません。 【OSインストール時のエラーメッセージ】 A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you’ve seen this stop error screen. Restart your computer. If this screen appears again. Follow these steps: The BIOS in this system is not fully ACPI complaint. Please contact your system vendor or visit http://www.hardeare-update.com for an updated BIOS. If you are unable to obtain an updated BIOS or the latest BIOS supplied by your vendor is not ACPI compliant, you can turn off ACPI mode during text mode setup. To do this, simply press the F7 key when you are prompted to install storage drivers. The system will not notify you that the F7 key was pressed – it will silently disable ACPI and aloe you to continue your installation. Technical information: *** stop: 0x000000A5 ( 0x00000011 , 0x00000007 , 0xF89FD0C0 , 0x0100000E ) 【パソコンの情報】 J2705 emachines

  • グラボ交換後にエラー

    こんにちわ、よろしくお願いします。 今まで使っていたグラボ(GeForce8500GT)が壊れてしまいモニターが真っ黒な状態になってしまった為新しくショップの人に8500GTと同じ位の性能だといわれてGeForce210というものを購入して交換し、PCを起動したところWindowsのロゴの画面になったとたんブルースクリーンが出てしまい起動できなくなってしまいました。 ブルースクリーンには A problem has been detected and windows has been shut down to prevent damage to your computer If this is the first time you've seen this stop error screen, restart your computer.If this screen appears again,follow these steps: The BIOS in this system is not fully ACPI compliant.please contact your system vendor or visit http://www.hardware-update.com for an updated BIOS. If you are unable to obtain an updated BIOS or the latest BIOS supplied by yourvendor is not ACPI compliant,you can turn off ACPI mode during text mode setup.To do this,simply press the F7 key when you are prompted to install storage drivers.The system will not notify you that the F7 key was pressed-it will silently disable ACPI and allow yor to continue your installation. Technical information: という文章と STOP:0x000000A5(0x00000002,0x8A337410,0xE1506228,0x8A355030) と書いていました。 何か解決策をご存知の方いらっしゃいましたらよろしくお願いします。

  • 起動しなくなってしまいました。

    自作PCに、OSは2000を使用してます。 今まで何の問題もなく起動してましたが、いきなりPCが再起動しました。その後BIOS画面が出て通常通り2000の起動画面が出るのですが、その途中再度再起動し、下の文字が表示されます。それからは一切動きません。なぜこのような現象になったのか不思議です。元に戻るのでしょうか? すみません、どなたかアドバイスよろしくお願いします。 *** STOP: 0x000000A5 (0x00000011,0x00000001,0x00000000,0x00000000) The ACPI BIOS in this system is not fully compliant with the ACPI specification.Please read the README.TXT for possible workarounds. You can also contact your system's manufacturer for an updated BIOS, or visit http://www.hardware-update.com to see if a new BIOS is available. The BIOS in this system is not fully ACPI compliant. Please contact your system vendor or visit http://www.hardware-update.com for an updated BIOS. If you are unable to obtain an updated BIOS or the latest BIOS supplied by your vendor is not ACPI compliant,you can turn off ACPI mode during text mode setup. To do this,simply press the F7 key when you are prompted to was pressed - it will silently disable ACPI and allow you to continue your installation.

  • 起動画面エラーについて

    コンピューター起動時に、バックが青の画面で a problem has been detected and windows has been shut down to prevent damage to you computer if this is the computer.if this screen appears again,follow these steps: the bios in this system is not fully acpi compliane. please contact your system vendor for an updated bios. techinical information; の画面が出ます。これは、BIOSが壊れているのでしょうか?

  • ウインドウズが起動しない

    下記のメッセージが出て起動しなくなってしまいました、症状は セーフモードなどを選ぶ画面が出るのですが、なにを選んでもセーフモードを選ぶ画面を繰り返すだけで、堂々巡りです。 あげくに下記のメッセージでハングアップです。 A problem has been detected and windows has been down to prevent damage to your computer if this the first time you ve seen this stop error screen restat your computer if this screen appears again follow these steps this BIOS in this system is not fully ACPI complianto please contact your system vendor or visit http://hardware-update.com for an updated BIOS IF youare unable to obtain anupdated BIOS or the latest BIOS supplied by your vendor is not ACPI comoliant you can turn off ACPI mode during text mode setup to do this simply press the F7 key when you are prompted to install storage drivers the system will not notify you that the F7 key was pressed-it will silently disable ACPI and allow you to continue your installation このようなメッセージでハングアップです。 BIOSが壊れたのでしょうか? マザーの電池切れかも? 教えていただきたいのですが、よろしくお願いします。

  • BIOS

    下記のメッセージが出て起動しなくなってしまいました、症状は セーフモードなどを選ぶ画面が出るのですが、なにを選んでもセーフモードを選ぶ画面を繰り返すだけで、堂々巡りです。 あげくに下記のメッセージでハングアップです。 A problem has been detected and windows has been down to prevent damage to your computer if this the first time you ve seen this stop error screen restat your computer if this screen appears again follow these steps this BIOS in this system is not fully ACPI complianto please contact your system vendor or visit ​http://hardware-update.com​ for an updated BIOS IF youare unable to obtain anupdated BIOS or the latest BIOS supplied by your vendor is not ACPI comoliant you can turn off ACPI mode during text mode setup to do this simply press the F7 key when you are prompted to install storage drivers the system will not notify you that the F7 key was pressed-it will silently disable ACPI and allow you to continue your installation このようなメッセージでハングアップです。 BIOSが壊れたのでしょうか? マザーの電池切れかも? 教えていただきたいのですが、よろしくお願いします。

  • ウインドウズが立ち上がりません

    先日、過って違うタイプのメモリーを増設しようとして、電源が入らず (入るが、ピーピーという音が断続的に鳴り続ける)、再起動もできないので 電源スイッチでオンオフを繰り返していたら、元のメモリーだけでも ウインドウズが立ち上がらなくなってしまいました。画面にはこんな表示が出ます。 A plobrem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again,follow these steps: The BIOS in this system is not fully ACPI compliant. Please contact your system vendor or visit http://www.hardware-update.com for an update BIOS. If you are unble to obation an update BIOS on the latest BIOS supplied by your vendor is not ACPI compliant,you can turn off ACPI mode durning text install storage drivers. The system will not notify you that the F7 key was pressed-it will silently distable ACPI and allow you to continue your installation. Technical information : ☆☆☆(←☆に近い記号です)Step:0X000000A5 (0X00010007,0X000000FD,0X00000000,0X00000000) 以上です。これはどのような部分が壊れ、どう対処すればよいでしょうか?ウインドウズのCD-ROMはありますが、再インストールのような形になって、Cドライブのファイルが消えてしまうことはなるべく避けたいです。セーフモードでも立ち上がりませんでした。 おわかりになる方、アドバイスをよろしくお願い致します。

  • 98から2000へインストールできません

    現在、古いパソコンを使っている素人です。Windows98から2000へクリーンインストールしようとインターネットなどで仕方を調べつつ取りかかっていました。4枚の起動ディスクを作成し、フロッピー4枚目の時に突然、青の画面に「The BIOS in this system is not fully ACPI compliant. Please contact your system vendor or visit http://www.hardware-update.com. for an updated BIOS. If you are unable to obtain an updated BIOS or the latest BIOS supplied by your vendor is not ACPI compliant , you can turn off ACPI mode during text mode setup. To do this , simply press the F7 key when you are prompted to install storage drivers. The system will not notify you that the F7 key was pressed - it will silently disable ACPI and allow you to continue your installation.」という文面が現れ、それ以降操作できない状態となっております。どうすれば、きちんとインストールできるのでしょうか?使用しているパソコンはサンヨーのB5ノートパソコンでMBC-G1Vです。アドバイスお願いします。

  • 98から2000へのインストール について

    98から2000へのインストール について 表題のとおり 次のようなエラーで止まってしまいます エラーの画面は***STOP:0X000000A5 (0x00000011、0x00000000、) The ACPI BIOS in this system is not fully compliant with the ACPI specification. Please read the README.TXT for possible workarounds.You can also contact your system's manufacturer for an updated BIOS, or visit http://www.hardware-update.com to see if a new BIOS is available.The BIOS in this system is not fully ACPI compliant.Please contact your system vendor or visit http://www.hardware-update.com for an update ご教授ください