• 締切済み

起動時に次のメッセージが表示されたままになります。

windows2000を起動する際、下記メッセージがでます。 you've seen this Stop error screen,restart your computer. If this screen appears again follow these step; Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. check your hard drive to make sure it is properly configured and terminated. Run CHKDSK / F to check for hard drive corruption, and then restart your computer. Refer to your Geteing Started manual for more information or troubleshooting Stop errors. ---------------------------------- 外付けHDDをつけたままウィルススキャンを行い、スキャン終了後に自動的に電源を切る設定にし翌日、起動したところ正常起動しないので外付けHDDを外し再起動しましたら上記のメッセージがでました。 セーフモードで起動しようとしても同じメッセージが出たままです。 正常起動させる方法をお教えいただけますとありがたいです。

みんなの回答

  • kusa_mochi
  • ベストアンサー率76% (1599/2089)
回答No.1

メッセージから推察するに、スキャン中に停電や瞬断でHDDにダメージが加わりその障害の為正常起動出来なくなっている恐れがあると思う。 先ずは、そのHDD内にある必要なファイルのレスキュー(吸出し)を行うべきだと思う。 方法は、2通り有る。  ・KnoppixのようなCD-ROMから起動出来るLinuxを立ち上げてHDDにアクセスする方法  ・HDDを取り出して他のPCに接続してそのHDDにアクセスする方法 必要なデータの救出が終わったら、次はHDDチェックツールでHDDの障害をチェックする。参考URLの中から自分が使っているHDDメーカーのチェックツールを別PCでダウンロードし起動ディスクを作成後チェックしてみよう。 もしも運良くハード障害箇所が見つからないようなら、OSの修復インストールを行えば元通り立ち上がると思う。メーカー製PC等でリカバリディスクしかない場合は、リカバリしてからバックアップしたデータを復元して下さい。 ハード障害箇所が見つかった場合は、選択肢が2つある。  ・そのHDDは諦めて新品のHDDを購入し、それにOSをインストールorリカバリする  ・そのHDDにローレベルフォーマットを掛けて一度初期化して再利用する 但し、再利用した場合(たぶんこちらの可能性の方が高いのだが)その後も新しい障害箇所が次々と発生する事があるので、1週間位テスト使用してみて、再度ツールで障害箇所が無い事を確認してから本格的に使うのが良いと思う。(ツールでチェックした結果新たな障害箇所が見つかったなら、HDDは破棄する)

参考URL:
http://bariden.ddo.jp/~mirakuru/hdd.html
nanahinaan
質問者

お礼

ひじょうにご丁寧なご回答ありがとうございました。 お教えいただいた方法で試してみたいと思います。

関連するQ&A

  • エラー表示が出て起動しません

    LANアダプタを増設後はきちんと起動したのに、再起動後エラー表示が出て、進みません。 困ってます。教えてください。 エラー表示↓ If this is the first time you're seen this stop error screen. restart your Computer. Ifthis scrren appears again, follow these steps. Check for vituses on your computer. Remove any newly installed hard drives or hard drive controllers.Check your hard drive to make sure it is properly corfigured and terminated. Run CHKDSK / F to check for hard drive corruption, and ther restart your computer. Refer to your Getting started maunal for more information on troubleshooting stop errors.

  • パソコンが起動しない

    私はバイオのWindows2000プロフェッショナルをつかっています。 電源をいれて立ち上がってきたのですが、画面にこの英文がでてきて 起動しなくなりました。意味が解らずこまっています。 どうすればいいのか、教えてください。お願いします。 if this is the first time you’ve seen this stop errer screen,restart your these steps check for viruses on your computer.remove any newly installed hard drives or hard drive controllers. check your hard drive Run CHKDSK/to check for hard drive corruption and then restart your computer.refer to your getting started manual for more imformation on troubleshooting stop errors.

  • Windows 2000 が起動できない。

    WINDOWS 2000で起動時に *** STOP: 0x0000007B (0xF902384C,0xC0000034,0x00000000,0x00000000) INACCESSIBLE_BOOT_DEVICE If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check for viruses on your computer. Remove any newly installed hard drivers or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer. Refer to your Getting Started manual for more information on troubleshooting stop errors. という、エラーが出て起動ができません。 なるべく、リカバリ以外で起動する方法はありませんか?

  • ブルースクリーンにエラーメッセージが出てPCが起動しない

    ブルースクリーンにエラーメッセージが出てPCが起動しない 購入して7年ほど経ったPCですがosはWindows2000です。電源を入れるとブルースクリーンにエラーメッセージが出てきて起動しません。周辺機器のUSB等を全て抜き、PC本体内部のメモリ等プラグ抜き差ししたり掃除・電池交換もしてみましたがだめでした。ウィルスチェックをしようにもPCが起動しないのでできません。どうすればよいのでしょうか? ご教授ください。宜しくお願いします。 エラーメッセージは下記の通りです。 ***STOP:0×0000007B(0×82125030,0×C0000032,0×00000000,0×00000000)*** INACCESSIBLE_BOOT_DEVICE If this is the first time you've seen this Step error screen,restart your computer.If this screen appears again,follow these steps: Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK/F to check for hard drive corruption,and then restart your computer. Refer to you getting Started manual for more infomation on troubleshooting Stop errors.

  • xp proで起動ディスクで起動すると・・・

    XP PROで起動ディスクを起動すると6枚目のFDを読み終えると英語のエラーが出てきます。これはどう対処すればよいのでしょうか・・・。 A problem has been detected and windows has been shut down to prevent damege to your computer. If this is the first time you've seen this Stop error screen,restart your computer.if this screen appears again,follow these steps : Check for viruses on your computer.Remove any newly installed hard drives or hard drive controllers.Check your hard drive to make sure it is properly configured and terminated.Run CHKDSK /F to check for hard drive corruption,and then restart your computer. technical information: Stop:0*0000007B(0*F99DD63C,0*C0000034,0*00000000,0*00000000)

  • 起動しなくなりました

    自作PCです。 HDDを3つに分けて2000・XP・データ保存で使用しています。 2000を入れているドライブの容量が少なくなったのでパーティションマジックを知人から借りてXPにインストールしXP上でパーティションを変更し再起動、XPは正常に動きましたが、管理ツールで2000をアクティブにして再起動したら途中で下記のメッセージがでて先に進みません。 STOP:0x0000007B(0xEB81F84C,0xC000000E,0x00000000,0x00000000)INACCESSIBLE_BOOT_DEVICE If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again,follow these steps: Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers.Check your hard drive to make sure it is properly configured and terminated.Ran CHKDSK/F to check for hard drive corruption,and then restart your computer. Reter to your Getting Started manual for more information on troubleshooting Stop errors. F8を押してセーフモード他を試しましたが同じメッセージが出てしまいます。 再インストールしか方法はないのでしょうか。 宜しくお願いします。

  • ブルー画面でPCが起動しません。。。。。

    a problem has been detected and windows has been shut down to prevent damage to your computer if this is the first time you`ve seen this stop error screen restart your computer. if this screen appears again, follow these steps: check for viruses on your computer remove any newly installed hard drives or hard drive corruption,and then restart your computer. technical information:a problem has been detected and windows has been shut down to prevent damage to your computer if this is the first time you`ve seen this stop error screen restart your computer. if this screen appears again, follow these steps: check for viruses on your computer remove any newly installed hard drives or hard drive corruption,and then restart your computer. technicalinformation:STOP:0x0000007b(0x9683528,0xc0000034,0x00000000,0x00000000) と出てPCが起動しません。どうしたらいいですか? HDは買い換えたばっかりです。

  • 起動しないのですが…どうすれば

    家に帰ってPCの電源を入れると、こんなメッセージがでました。 a problem has been detected and windows has been shut down to prevent damage to your computer. if this is the first time you've seen this stop error screen restart your computer. if this screen appears again follow these steps: disable or uninstall any anti-virus,disk defragmentation. or back up utilities. check your hard drive configuration. and check for any updated drivers, RUN CHKDSK/F to check for hard drive corruption,and then restart your computer. このような場合どうしたらいいのでしょう?

  • 再起動してXPが起動しない

    Windows XP homeedition でいつものように起動させると少しブルースクリーンみたいになり、起動せずに何回も再起動みたいになります。そこでXPのCDを入れて起動させた所 A problem has been detected and winndows has been shut down to prevent damege to your compuetr If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again,follow these steps: check for viruses on your computer.Remove any newly installed hard drive or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. RUN CHKDSK /F to check for hard drive corruption,and then restart your computer. Technical information: STOP:0x0000007B(0x78D2524,0xC0000034,0x00000000,0x00000000) と出てきました。一体何をどうすればいいのでしょうか?今はネカフェから繋いでいます。PCが1台しかなく連絡とるにはネカフェからではないと出来ないので・・・・・ 急いでいます。宜しくお願いします。

  • Windows2000が起動しなくなりました。

    Windows2000が起動しなくなりました。 最後に正常に起動したときにCドライブでファイル名を変更し確定しようとしたらフリーズし、タスクマネージャーからのシャットダウン、ログオフも効かなかったので電源ボタン長押しで終了。もう一度起動すると「Windows2000を起動しています…」□□□□□□□□とメーターが進んでいくところでブルー画面になり、以下のエラーメッセージが表示されました。 *** STOP: 0x00000078 (0x84331670,0xC0000032,0x00000000,0x00000000) INACCESS IBLE_DEVICE If this is First time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps; Check forviruses on your computer.Remove any newly installed hard drives or drive configured and germinared. Run CHKDSK /F to check for hard drive corruption, and then restart your computer. Refer to your Getting Started manual for more information on troubleshooting stop errors; これはどういうことなのでしょうか? また、解決方法はどのようなものがあるでしょうか?