• ベストアンサー

起動時エラーメッセージが出現します

The following file is missing or corrupted:C\REALEMODE\ASPDOS.SYS There is an error in your CONFIG.SYS file on line 23 The following file is missing or corrupted:C\REALEMODE\ASPDOS.SYS There is an error in your CONFIG.SYS file on line 24 The following file is missing or corrupted:C\REALEMODE\ASPDOS.SYS There is an error in your CONFIG.SYS file on line 25 このような、メッセージが出現するのですが、原因はわかるでしょうか?また、HDDの中身は残っているのでしょうか?対処法がわかれば教えてください?ヨロシクお願いします。

質問者が選んだベストアンサー

  • ベストアンサー
  • Hageoyadi
  • ベストアンサー率40% (3145/7860)
回答No.1

で、起動は出来るんでしょうか? できるのなら、 Config.sysをメモ帳で開き、23行目から25行目の C:REALMODE・・・・で始まる記述の最初に「rem」を挿入して   remn C:REALMODE\KMEATAPI.SYS として、ファイル>上書き保存>ファイル>メモ帳の終了して再起動しましょう。realmode のものは、とくに無くてかまいませんから。 その後バックアップを取った上で、OSの再インストールをお勧めします。 ASPIDOS.SYS ・・・ではないんですよね?

juki958
質問者

補足

記述間違いの可能性もあるかもです・・・・ASPIDOS.SYSの部分です。すみません。

その他の回答 (2)

  • arukamun
  • ベストアンサー率35% (842/2394)
回答No.3

エラーを見る限り、ファイルが存在しないかエラーを起こしているのと、HMA(ハイ・メモリ・エリア)が使えないとかいっています。 C:\CONFIG.SYSの内容を補足してください。 Windows 98が起動できるのであれば、メモ帳で開けます。 起動できないで、DOSプロンプトに行くようであれば、 TYPE C:\CONFIG.SYS で見れます。

  • arukamun
  • ベストアンサー率35% (842/2394)
回答No.2

CONFIG.SYSの23、24、25行目にかかれているDEVICE=C:\REALMODE\ASPDOS.SYSでエラーが出ているようです。 本当にASPDOS.SYSでしょうか? ところで、お使いのOSは何でしょうか。

juki958
質問者

補足

全て書き忘れてましたすみません・・・OSは98SE です。よろしくお願いします The following file is missing or corrupted:C\REALEMODE\ASPDOS.SYS There is an error in your CONFIG.SYS file on line 23 The following file is missing or corrupted:C\REALEMODE\ASPDOS.SYS There is an error in your CONFIG.SYS file on line 24 The following file is missing or corrupted:C\REALEMODE\ASPDOS.SYS There is an error in your CONFIG.SYS file on line 25 The following file is missing or corrupted:C\WINDOWS\DBLBUFF.SYS The following file is missing or corrupted:C\WINDOWS\BILING.SYS The following file is missing or corrupted:C\WINDOWS\IFSHLP.SYS Warning:the high memory area (HMA) is not aVaivable, Additional low memory (below 640k) will be used instead, C:\REM [Header] File not found-C:\WINDOWS\COUMTRY.SYSCannot find WIN .COM,unable to conti

関連するQ&A

  • 起動しません

    同じ用な質問があったのですがでている文字が少し違うので質問させてもらいました 起動させるとThere is an error in your CONFIG.SYS file on line 4 The following file is missing or corrupted:C:\WINDOWS\JDISP.SYS There is an error in your CONFIG.SYS file on line 5 The following file is missing or corrupted:C:\WINDOWS\JDISP.SYS There is an error in your CONFIG.SYS file on line 6 The following file is missing or corrupted:C:\WINDOWS\JDISP.SYS There is an error in your CONFIG.SYS file on line 7 The following file is missing or corrupted:C:\WINDOWS\JDISP.SYS There is an error in your CONFIG.SYS file on line 8 The following file is missing or corrupted: C\WINDOWS\HIMEM.SYS The following file is missing or corrupted: C\WINDOWS\DBLBUFF.SYS The following file is missing or corrupted: C\WINDOWS\BILING.SYS The following file is missing or corrupted: C\WINDOWS\IFSHLP.SYS File not found cannot find WIN.com,unable to continue loading Windows C:\> とゆう文章がでますPC初心者で無理にいじらない方がいいと思いこのままでおいていますこれはなおせるんでしょうか?もし直す場合以前あったデータは消えてしまうのでしょうか?すいませんが教えてください

  • 起動したら config.sys エラーに

    nec note PC-LL7001D WIN XP リカバリーしようと マニュアルどおり BIOSを初期化して 立ち上げたら、以下のconfig.sysエラーが出て 起動できませんでした。アドバイスを お願いします。 The following file is missing or corrupted:C:\OS\DOS\ANSI.SYS There is an error in your CONFIG.SYS file on Line 9 The following file is missing or corrupted:C:\OS\DOS\JFONT.SYS There is an error in your CONFIG.SYS file on Line 10 The following file is missing or corrupted:C:\OS\DOS\JDISP.SYS There is an error in your CONFIG.SYS file on Line 11 The following file is missing or corrupted:C:\OS\DOS\JKEYB.SYS There is an error in your CONFIG.SYS file on Line 12 The following file is missing or corrupted:C:\OS\DOS\RAMDRIVE.SYS There is an error in your CONFIG.SYS file on Line 13 Warning:The high memory area(HMA)is not available Additional low memory(below 640k) will be used instead Bad command or file name Bad command or file name Bad command or file name Bad command or file name Bad command or file name Bad command or file name Bad command or file name Bad command or file name で type c:\config.sys は FILES=30 BUFFERS=10 STACKS=9.256 LASTDRIVE=R DOS=HIGH.UMB DEVICE=C:\OS\DOS\HIMEM.SYS DEVICE=C:\OS\DOS\BILNG.SYS DEVICE=C:\OS\DOS\ANSI.SYS DEVICEHIGH=C:\OS\DOS\JFONT.SYS/MSC=OFF DEVICEHIGH=C:\OS\DOS\JDISP.SYS/HS=LC DEVICEHigh=C:\OS\DOS\JKEYB.SYS/106 C:\OS\DOS\JKEYBRD.SYS DEVICE=C:\OS\DOS\RAMDRIVE.SYS 5120 512 1024/E よろしくお願いいたします

  • 故障?ウイルス?

    パソコンの電源を入れると、メーカーロゴのあとで黒い画面で、 The following file is missing or corrupted: C:\OS\DOS\JFONT.SYS There is an error in your CONFIG.SYS file on line 10 The following file is missing or corrupted: C:\OS\DOS\JDISP.SYS There is an error in your CONFIG.SYS file on line 11 The following file is missing or corrupted: C:\OS\DOS\JKEYB.SYS There is an error in your CONFIG.SYS file on line 12 The following file is missing or corrupted: C:\OS\DOS\RAMDRIVE.SYS There is an error in your CONFIG.SYS file on line 13 Warning: the high memory area (HMA) is not available. Additional low memory (below 640K) will be used instead. Bad command or file name Bad command or file name Bad command or file name Bad command or file name Bad command or file name Bad command or file name Bad command or file name Bad command or file name C:\〉 こんな感じで、再インストールしようにも反応しません、初心者の私ではどうしていいかわかりません。 LaVie L LL700/1です。 再インストールするための、電源入れてF11を押しても、この英字がでます。

  • すっきり!!デフラグ後起動が出来なくなりました(win98SE)

    すっきり!!デフラグを実行し、再起動すると同時に電源が落ち、 それ以来、何度起動しても黒い画面に英字が出るのみで起動が出来ません。 色々と調べて見たのですが、セーフモードでの起動を試みても、同じエラー内容が表示されるばかりでどうしようもありません。 当方あまり詳しくないので、最終手段でリカバリー(PCデータ保存・抽出)などの方法もよく分かりません。 最適な処置を取りたいので、分かる方、どうか宜しくお願いします。 表示されている内容は以下です。 (実際表示されているスラッシュは全て逆スラッシュです) The following file is missing or corrupted: C:/WINDOWS/JDISP.SYS There is an error in your CONFIG.SYS file on line 5 The following file is missing or corrupted: C:/WINDOWS/JKEYB.SYS There is an error in your CONFIG.SYS file on line 6 The following file is missing or corrupted: C:/WINDOWS/KKCFUNC.SYS There is an error in your CONFIG.SYS file on line 7 The following file is missing or corrupted: C:/WINDOWS/HIMEM.SYS The following file is missing or corrupted: C:/WINDOWS/DBLBUFF.SYS The following file is missing or corrupted: C:/WINDOWS/BILING.SYS The following file is missing or corrupted: C:/WINDOWS/IFSHLP.SYS Warning: the high memory area (HMA) is not available. Additional low memory (below 640K) will be used instead. C:/>loadhigh c:/windows/COMMAND/nlsfunc.exe c:/windows/country.sys File not found ー C:/WINDOWS/COUNTRY.SYSCannot find WIN.COM, unable to continue loading Windows C:/>_(←アンダーバー点滅)

  • 大変困っております!

    PCがおかしくなってしまいました...以前から画面がフリーズしがちで、今日も何回かシャットダウンを繰り返してしまったんです(:_;)すると真っ黒の画面になって白い文字がばーって出てきたんです。前に友達にF8を押して・・・ってのを聞いたことがあったのでそれを押して、何かを押してしまって。。。すると以下のような文字が出てきました。 There is error in your CONFIG.SYS file on line 9 The following file is missing or corrupted; C;OS DOS JFONT.SYS There is error in your CONFIG.SYS file on line 10 The following file is missing or corrupted; C;OS DOS JDISP.SYS There is error in your CONFIG.SYS file on line 11 The following file is missing or corrupted; C;OS DOS JKEVR.SYS There is error in your CONFIG.SYS file on line 12 The following file is missing or corrupted; C;OS DOS RAMDRIVE.SYS There is error in your CONFIG.SYS file on line 13 Warning; the high memory area (HMA)is not available. Additional low memory(below 640K)will be used instead. Bad command or file name Bad command or file name Bad command or file name Bad command or file name Bad command or file name Bad command or file name Bad command or file name Bad command or file name C;/〉 と出て・・・何をどうすればいいのかわかりません。 電源を入れたらこの画面になるために何もできません。 助けて下さい・・・本当にお願いします。機種はLL500/1というものです。

  • Safeモードでしか起動しなくなってしまいました。

    Win98SEを使っています。DriveDietを使って不要なファイルを整理した際に、必要なファイルも削除してしまったみたいで立ち上げた時に以下の画面が出ます。 There is an unrecognized command is your CONFIG.SYS dile. There is an error in your CONFIG.SYS file on line 1 There is an unrecognized command is your CONFIG.SYS dile. There is an error in your CONFIG.SYS file on line 2 The following file is missing or corrupted: COMMAND.COM Type the name of the Command Interpreter (e.g.,C:\WINDOWS\COMMANDCOM) C> Safeモードで立ち上げるとキーボードタイプを選ぶような画面が出て、どれか選ぶとSafeモードで立ち上がりました。リカバリーをしたいのですがFDDしか内蔵されていないので非常に困っています。何か手段はあるのでしょうか?

  • 再セットアップ

    システムの再セットアップしたんですが、セットアップメニューが表示されません。(F11)で再セットアップメニューが出るんですけど・・・ 画面に出たのが There is an error in your CONFIG.SYS File on Line9 The fo llowing file is missing or corrupted: C:\os\DOS\JFONT.SYS There is an erroe in your CONFIG.SYS file on line10 The fo llowing file is missing or corrupted: C:\os\DOS\JDISP.SYS There is an erroe in your CONFIG.SYS file on line11 The fo llowing file is missing or corrupted: C:\os\DOS\JKEYB.SYS There is an erroe in your CONFIG.SYS file on line12 The fo llowing file is missing or corrupted: C:\os\DOS\RAMDRIVE.SYS There is an erroe in your CONFIG.SYS file on line13 Warning:the high memory area(HMA) is not available. additional low mrmory(below640K)will be used instead. Bad command or file name C:\> と 表示されます。 PCの状態は NEC PC-LL500/2D ノートPC セットアップする前にメモリー(256)を抜いて購入時と同じくしてます。BIOSのセットアップユーテイリテイは初期値に戻してあります。 何回かトライしてみたんですけど この画面からぬけ出せません、どうしたら良いでしょう 教えてください  リカバリーは作っていません。

  • config.sysのエラーについて(No.589356の続き)

    お読みいただきありがとうございます。  No.589356でconfig.sysの内容確認方法について質問した者です。Windows98のパソコンをMS-DOSで立ち上げると、以下のメッセージが表示されます。 The following file is missing or corrupted:c:\REALMODE\OAKCDROM.SYS There is an error in your CONFIG.SYS file on line 12  typeコマンドで内容を確認すると、12行目には DeviceHigh=c:REALMODE\OAKCDROM.SYS  と記述されています。この行を削除してconfig.sysを保存しなおせばよいのでしょうか?  また、Windowsを立ち上げた状態でMS-DOSプロンプトのウインドを開き、ここでc:>type config.sysと打ち込むと、MS-DOSで立ち上げたときとは違う内容が表示されるのですが、そういうものなんでしょうか?

  • 驚速ソフトでPCが起動しなくなりました

    windows98のPCに驚速ソフトを入れて使用したのですが、2回目使用して再起動してから、立ち上がらなくなってしまいました。 there is an error in your CONFIG.SYS file on line 6 the following file is missing or corrupted:\WINDOWS\JDISP.SYS こんな文が15行ぐらいあり、最後は Cannot find WIN.COM unable to continue loading Windows. C:\> と表示されています。 セーフモードで立ち上げても同じ表示が出ます。 解決策があれば教えてください。 宜しくお願いいたします。

  • CONFIG.SYSの内容確認方法

    お読みいただきありがとうございます。  会社のPC(Windows98)にセキュリティソフトをインストールしたら動作がかなり遅くなり、いろいろ調べた上でレジストリの最適化を実行しようとしてMS-DOSで立ち上げたところ、いきなり次の2行が表示されました。 The following file is missing or corrupted:c:\REALMODE\OAKCDROM.SYS There is an error in your CONFIG.SYS file on line 12  最初の行はともかくとして、2行目は気になるのでCONFIG.SYSの内容を確認してこのサイトで質問したいのですが、CONFIG.SYSの内容を表示させるコマンドを忘れてしまいました。typeではなかったですか?  中途半端な知識しかないので困ってます。教えて下さい。