• 締切済み

ブルースクリーンが何度も出ます

最近私のPCが以下のようなブルーブルースクリーンを発して何度も停止します: A problem has been detected and windows has been shutdown to prevent damage to your computer. DRIVER_IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problem continue, disabele or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable Options, and then select Safe Mode. Technical information: *** STOP:0X000000D1(0X00000010, 0X00000002, 0X00000000, 0XEB9572B2) *** bumwl5.sys - Address EB9579B2 base at EB934000, DataStamp 436812d2) Biginning dump of physical memory. Physical memory dump complete. Contact your system administrator or techinical support group for further assistance. なお、私のほうで少し調べた結果、「bcmwl5.sys」とは、私が使っているBuffaloの無線LANのアダプタ(Buffalo WLI-CB-G54HP Wireless LAN Adapter)みたいです。BuffaloのHPで調べてみると、今現在最新版となっているVer 3.104.64.52 を使っています。どうしたらいいか教えてください! ちなみに私のPCはSHARP PC-AE50J (ノートPC)で、メモリは750MBに増設しています。

みんなの回答

  • ameru2007
  • ベストアンサー率13% (180/1381)
回答No.3

ANO2です。 交換するかどうかはおいといて 交換できますよ^^ http://buffalo.jp/taiou/kisyu/detail.php?id=49867 対応表にも載ってますし・・・(自己責任ですけど^^;) IDEで120Gまでなら大丈夫みたいですね^^

ee950657
質問者

お礼

ご回答ありがとうございます。 情報を寄せてくださった、HDD交換は最後の手段とさせていただきます。 今現在、問題があると思われるBCMWL5.sysについて、バッファローに問い合わせています。 それでも問題が解決しない場合は検討いたします。

全文を見る
すると、全ての回答が全文表示されます。
  • ameru2007
  • ベストアンサー率13% (180/1381)
回答No.2

経験上 多分 HDの寿命かな HDが問題が出てくるといろんなメッセージが出てきます^^; (まったく関係ないものまで悪いとメッセージが出たりします) 私ならHD交換してOS入れ直ししてみますけどね

ee950657
質問者

お礼

ご回答ありがとうございます。私のPCはノート型なのでハードディスクを入れ替えられません(-_-;)一応2ヶ月前に別の箇所が壊れて、PCを修理に出したばかりなのに…もう故障ですか(T_T)(ちなみに購入したのは2年前)

全文を見る
すると、全ての回答が全文表示されます。
  • debukuro
  • ベストアンサー率19% (3635/18948)
回答No.1

ハードウエアまたはソフトウエアが原因でコンピューターが危険な状態になったので故障を防止するためにコンピューターが停止されたのです どこが悪いのかは分かりません インストールしたプログラムや取り付けたハードウエアを取り外してテストします それでも駄目だったら冷却ファンや通風孔に異常がないか点検してください CPUや電源部の過熱が考えられます 全部外して異常がなかったら外したどれかが悪いのです

ee950657
質問者

お礼

ご回答ありがとうございます。現在調査中です…

全文を見る
すると、全ての回答が全文表示されます。

関連するQ&A

  • 何度もブルースクリーンが…

    ここ最近、パソコンをしばらく放っておくと、必ずと言ってよいほどブルースクリーンになります。 以下のようなエラーメッセージが出るのですが、これはOSを再インストールするべきなのでしょうか? それとも、すでに寿命なのでしょうか…。 英語を訳してみたものの、イマイチ意味がわからず、もしお詳しい方がいらっしゃいましたら、ぜひ教えて頂ければ幸いです。。。 a problem has been detected and windows has been shut down to prevent damage to your computer. a process or thread crucial to system operation has unexpectedly exited or been terminated. If this is the first time you've seen this stop error screen,restart your computer.If this screen appears again,follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacture for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software.Disable BIOS memory options such as caching or shadouwing. If you need to use Safe Mode to remove or disable components,restart your computer,press F8 to select Advanced Startup Options,and then select Safe Mode. Technical information stop: 0x000000F4 0x00000003 0x8A554850 0x8A5549c4 0x805D49B4 Beginning dump of physical memory

  • ブルースクリーンが出てしまいます

    youtubuを利用している時に主になります。 以下がブルースクリーンの内容です。 A problem has been detected and windows has been shut down to prevent damage to your computer. IRQL NOT LESS OR EQUAL If this is the first time you've seen this stop error screen,restart your cmputer. If this screen appears again,follow these steps: Check to make sure any new hardware or software is proqerly installed. If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software.Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components,restart your computer,press F8 to select Advanced Startup Options,and then select Safe Mode. Technical information: STOP: 0x0000000A(0x000000D7,0x00000002,0x00000000,0x804ED977) Beginning dump of physical memory Physical memory dump complete. Contact yor system administrator or technical support group for further assistance. Windows XPを使ってます。 このブルースクリーンが出ないようにするには、どうすればいいのか教えてください。よろしくお願いします。

  • ブルースクリーン

    A problem has been detected and windows has been shut down to prevent damage to your computer. IRQL_NOT_LESS_OR_EQUAL If this the first time you've seen this stop error screen,restart your computer. If this screen appears again,follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe Mode to remove or disable components,restart your computer,press F8 to select Advaned Startup options,and then select safe Mode. Technical information: *** STOP:0X0000000A(0X00000054,0X00000002,0X00000001,0X804DDC8E) Beginning dump of physical memory physical memory dump complete. contact your system administrator or technical support group for further assistance. 起動したときに上記のように書いてありました。 意味がわかりません・・・

  • ブルースクリーンになった

    たびたびブルースクリーンになりますが、 今回は *** STOP: 0x0000001D(0xB64F736A,0xBACD79B4,0x00000000) 前回は A problem has been detected and wiondows has been shut to down to prevent damage to your computer. ORQL-NOT-LESS-OR-EQUAL If this si thefirst time you`ve seen this stop error screen, restart your computer. If this screen again,follow these steps: check to meke sure any new hardware or spftware is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components,restart your computer, press F8 to select advanced startup option, and then select safe mode. Technical information: *** STOP: 0x0000000A (0x00000010,0x00000002,0x00000001,0x8051873C) beginning dump of physical memory physical memory dump complete. Contact your system administrator or technical support group for further assistance. 教えてください、お願いします。

  • ブルースクリーンについて

    質問させていただきます。 alcohol52%をつかってMDSファイルをマウントしたところ、次のようなエラーが起きてしまいました。 A problem has been detected and windows has been shut down to prevent damage to your computer. IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup options, and then select safe made. Technical information: *** STOP: 0x0000000A(0x0000000C,0x00000002,0x00000000,0x804F00B6) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further 自分でもこのエラーについて調べては見たんですが、解決策が見つかりません。 PCはwindowsXPを使っています。 どなたか解決策をお教えいただけたらと思います。 よろしくお願いします。

  • ブルースクリーンが頻発します

    パソコンの電源を入れてしばらく作業したり、そのままにしていると以下のようなブルースクリーンが出るようになりました。頻度としてはほぼ毎日です。OSは最近入れ直したばかりです。中段あたりにある対処がうまく訳&解釈できません。対策をお願いします。 ショップ機 Ahtlon1700+ メモリ256+256+256=768MB HD IDE250GB WindowsXP Pro SP2 -------------------------------------------------------------- PAGE_FAULT_IN_NONPAGED_AREA If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again,follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components,restart your computer,press F8 to select Advanced Startup Options,and then select Safe Mode. Technical information: *** STOP:0x00000050 (0xFEDEFF124,0x00000000,0x804E09A4,0x00000000) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further assistance.

  • ブルースクリーンが起こってしまったのですが

    質問をさしてもらい ブルースクリーンということが分かり (対処の仕方がわかりません) BlueScreenView を使い (何個かありましたが数が多かったので何個かはりました) ブルースクリーンのところを抜き出してみました ハードディスクのバックアップはとらなくても大丈夫でしょうか A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: USBPORT.SYS DRIVER_IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x000000d1 (0x0000008c, 0x00000002, 0x00000000, 0x8fbc62c4) *** USBPORT.SYS - Address 0x8fbc62c4 base at 0x8fbc0000 DateStamp 0x49e01fcf 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x00000063, 0x0000001b, 0x00000001, 0x82ec15ce) *** ntkrnlpa.exe - Address 0x82e67fd9 base at 0x82e1a000 DateStamp 0x4cb710d6 三つめ A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: Ntfs.sys NTFS_FILE_SYSTEM If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x00000024 (0x001904aa, 0xbf7b7a18, 0xbf7b7714, 0x82ebe22c) *** Ntfs.sys - Address 0x8b41cfff base at 0x8b403000 DateStamp 0x49e0192a

  • ブルースクリーンエラー

    少し前に質問させてもらったのですが、やはりまだ頻繁にでるので質問させてください。 ログをとったので対処法を教えてもらえないでしょうか? よろしくお願いします PAGE_FAULT_IN_NONPAGAED_AREA If this is the first time you're seen this stop error screen,restart your computer,If this screen appears again,fallow these steps: check to make sure any new hardware or software is properly installed. Ifthis is a new istallation,ask yore hardware or software manufacturer for any windows updates you mightneed. If problems continue,disable or remore any newly installed hardware or software,Disable BIOS memory options such as caching or shadowing. If you need touse sofeMode to remove or disable components,restart your computer,press F8 to select Advanced startup options,and then select safeMode. Technical in for mationi *** Stop:0x00000050(0xBAO0154,040000000,0x8058388F,0x00000000)

  • ブルースクリーンが起こってしまったのですが

    質問をさしてもらい ブルースクリーンということが分かり (対処の仕方がわかりません) BlueScreenView を使い (何個かありましたが数が多かったので何個かはりました) ブルースクリーンのところを抜き出してみました ハードディスクのバックアップはとらなくても大丈夫でしょうか (色々と対処をしてもまた別の原因でブルースクリーンが起こってしまった場合はどうすればよいでしょうか) A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: luafv.sys IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x6c006160, 0x0000001b, 0x00000001, 0x82ef55ce) *** luafv.sys - Address 0x91be4036 base at 0x91bdb000 DateStamp 0x47918afb 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: tmcomm.sys PAGE_FAULT_IN_NONPAGED_AREA If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x00000050 (0xd76c5da4, 0x00000000, 0x807c6d5b, 0x00000002) *** tmcomm.sys - Address 0x8f28ce4b base at 0x8f287000 DateStamp 0x49d4727e

  • ブルースクリーン現象になりました

    質問をさしてもらい ブルースクリーン現象ということが分かり (対処の仕方がわかりません) BlueScreenView を使い (何個かありましたが数が多かったので何個かはりました) ブルースクリーンのところを抜き出してみました ハードディスクのバックアップはとらなくても大丈夫でしょうか A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x9589a9b8, 0x00000002, 0x00000000, 0x82ebb60b) *** ntkrnlpa.exe - Address 0x82e4ffd9 base at 0x82e02000 DateStamp 0x4cb710d6 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x00000000, 0x0000001b, 0x00000000, 0x82e95c94) *** ntkrnlpa.exe - Address 0x82e9bfd9 base at 0x82e4e000 DateStamp 0x4cb710d6 三つめ A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe CACHE_MANAGER If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information:

このQ&Aのポイント
  • PX-049Aを使用していますが、Wordで作成した宛名を洋型2号の封筒に横で印刷する際、左の余白が設定した余白よりも15mm少なく印刷されてしまいます。
  • これまでは問題なく印刷できていたのに、A4やB5などの用紙では問題がないのはなぜでしょうか?
  • 使用しているPCはHPLaptop 15s-eq1xxxです。どうすれば正しく余白を設定して印刷できるでしょうか?
回答を見る