• 締切済み

WindowsXPが起動しなくなった(Linuxとのマルチブート失敗)

WinXP Pro を使っているPCにRed Hat Linux7.3をインストールしたところ XPが起動出来なくなりました。自分で調べて次の様なことをしましたが Linuxは正常に起動するもののXPは起動しません。何か見落としている ことありませんでしょうか? ここを参考にして  http://www.zdnet.co.jp/help/howto/linux/redhat7_2_grub/04.html 次の用にmenu.lstを変更したところWinの起動に失敗します(詳細後述) #コメント行は省略 default=0 timeout=10 title Windows root (hd0,0) makeactive chainloader +1 # splashimage=(hd1,0)/grub/splash.xpm.gz title Red Hat Linux (2.4.18-3) root (hd1,0) kernel /vmlinuz-2.4.18-3 ro root=/dev/sde5 initrd /initrd-2.4.18-3.img -------------------------------- XP起動時のエラーは ------------------------------------------------------------- A problem has been detected and windows has been shut down to prevent damage to you computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. RUN CHKDSK /F to check for hard drive corruption, and then restart your computer. 以下省略 ------------------------------------------------------------ 対処として 1.リスタートを実行→変化なし 2.インストールCDから回復を実行し CHKDSKを実行回復のワーニング   が4行あり。リスタートするとセーフモードなどの起動選択画面が表示   された。 3.セーフモードを選択しても上記のエラーがでる。

  • HAL007
  • お礼率90% (307/340)

みんなの回答

  • kewa
  • ベストアンサー率38% (12/31)
回答No.1

お役にたつかどうか・・・

参考URL:
http://homepage2.nifty.com/winfaq/w2k/setup.html#1119
HAL007
質問者

お礼

ありがとうございます。 319310へ集約します。状況は補足に書きましたが 最悪の状態になっています。 http://oshiete1.goo.ne.jp/kotaeru.php3?q=319310

関連するQ&A

  • xp proで起動ディスクで起動すると・・・

    XP PROで起動ディスクを起動すると6枚目のFDを読み終えると英語のエラーが出てきます。これはどう対処すればよいのでしょうか・・・。 A problem has been detected and windows has been shut down to prevent damege to your computer. If this is the first time you've seen this Stop error screen,restart your computer.if this screen appears again,follow these steps : Check for viruses on your computer.Remove any newly installed hard drives or hard drive controllers.Check your hard drive to make sure it is properly configured and terminated.Run CHKDSK /F to check for hard drive corruption,and then restart your computer. technical information: Stop:0*0000007B(0*F99DD63C,0*C0000034,0*00000000,0*00000000)

  • ブルー画面でPCが起動しません。。。。。

    a problem has been detected and windows has been shut down to prevent damage to your computer if this is the first time you`ve seen this stop error screen restart your computer. if this screen appears again, follow these steps: check for viruses on your computer remove any newly installed hard drives or hard drive corruption,and then restart your computer. technical information:a problem has been detected and windows has been shut down to prevent damage to your computer if this is the first time you`ve seen this stop error screen restart your computer. if this screen appears again, follow these steps: check for viruses on your computer remove any newly installed hard drives or hard drive corruption,and then restart your computer. technicalinformation:STOP:0x0000007b(0x9683528,0xc0000034,0x00000000,0x00000000) と出てPCが起動しません。どうしたらいいですか? HDは買い換えたばっかりです。

  • 起動しないのですが…どうすれば

    家に帰ってPCの電源を入れると、こんなメッセージがでました。 a problem has been detected and windows has been shut down to prevent damage to your computer. if this is the first time you've seen this stop error screen restart your computer. if this screen appears again follow these steps: disable or uninstall any anti-virus,disk defragmentation. or back up utilities. check your hard drive configuration. and check for any updated drivers, RUN CHKDSK/F to check for hard drive corruption,and then restart your computer. このような場合どうしたらいいのでしょう?

  • Windows 2000 が起動できない。

    WINDOWS 2000で起動時に *** STOP: 0x0000007B (0xF902384C,0xC0000034,0x00000000,0x00000000) INACCESSIBLE_BOOT_DEVICE If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check for viruses on your computer. Remove any newly installed hard drivers or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer. Refer to your Getting Started manual for more information on troubleshooting stop errors. という、エラーが出て起動ができません。 なるべく、リカバリ以外で起動する方法はありませんか?

  • 同じようにインストールした2台のLinuxをデュアルブートしたい

    全く同じようにインストールした2台のLinux入りHDDをプライマリマスターとセカンダリマスターに接続し、 GRUBでデュアルブートさせたいです。 どちらのLinuxマシンも同じようにインストールしているので、 /boot/grub/grub.confには、  title Linux  kernel (hd0,0)/vmlinuz root=0303  initrd (hd0,0)/initrd と全く同じように書かれており、これで起動しています。 2台のHDDを接続し、プライマリに接続したHDDで起動し(こちらでしか起動できなかった)、 /sbin/fdisk -l で確認したところ、 プライマリに接続したHDDのデバイス名は/dev/hda1~3, セカンダリに接続したHDDのデバイス名は/dev/hdc1~3でした。 http://oshiete1.goo.ne.jp/qa1787988.html ↑には、hdaが(hd0)、hdbが(hd1)のように書かれていたので、 hdcは(hd2)かと思い、 grub.confに、  title Linux1  kernel (hd0,0)/vmlinuz root=0303  initrd (hd0,0)/initrd  title Linux2  kernel (hd2,0)/vmlinuz root=0303  initrd (hd2,0)/initrd と書いてみたのですが、GRUBで「Linux2」を選択しても、セカンダリに繋いだ方は起動しませんでした。 (ちなみに(hd1,0)と書いた場合は、(hd0,0)と同じくプライマリに繋いだ方が起動しました) この環境でデュアルブートするには、grub.confにはどのように書いたらよいでしょうか。

  • 再起動してXPが起動しない

    Windows XP homeedition でいつものように起動させると少しブルースクリーンみたいになり、起動せずに何回も再起動みたいになります。そこでXPのCDを入れて起動させた所 A problem has been detected and winndows has been shut down to prevent damege to your compuetr If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again,follow these steps: check for viruses on your computer.Remove any newly installed hard drive or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. RUN CHKDSK /F to check for hard drive corruption,and then restart your computer. Technical information: STOP:0x0000007B(0x78D2524,0xC0000034,0x00000000,0x00000000) と出てきました。一体何をどうすればいいのでしょうか?今はネカフェから繋いでいます。PCが1台しかなく連絡とるにはネカフェからではないと出来ないので・・・・・ 急いでいます。宜しくお願いします。

  • パソコンが起動しない

    私はバイオのWindows2000プロフェッショナルをつかっています。 電源をいれて立ち上がってきたのですが、画面にこの英文がでてきて 起動しなくなりました。意味が解らずこまっています。 どうすればいいのか、教えてください。お願いします。 if this is the first time you’ve seen this stop errer screen,restart your these steps check for viruses on your computer.remove any newly installed hard drives or hard drive controllers. check your hard drive Run CHKDSK/to check for hard drive corruption and then restart your computer.refer to your getting started manual for more imformation on troubleshooting stop errors.

  • XPが起動しない( 一一)

    PCを立ち上げようとすると、ブルー画面になり  a problem has been detected and windows has been shut down to prevent damage to your computer. if this is the first time you've seen this stop error screen restart your computer. if this screen appears again follow these steps: disable or uninstall any anti virus disk defragmentation or backup utilities. check your hard drive configuration and check for any updated drivers. run CHKDSK/f to check for hard drive configuration and then restart your computer. と出てくるのですが、どうすればいいのかさっぱり解りません。 PCにあまり詳しくないので(-"-) 誰かよきアドバイスを(>_<)

  • 自分のパソコンのwindowsが起動しなくなりました。

    パソコンの電源を付けると、セーフモード等の選択画面になり、セーフモードで起動したらブルーバック画面とともに以下の英文が表示され、windowsが起動出来ない状態になってしまいました。 A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears agin, follow these step: check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer. 再起動しても同じ画面しか出なく、ずっと待ってても何の変化もありません。 経験のある方、対処法を知っている方は回答おねがいします。

  • エラー表示が出て起動しません

    LANアダプタを増設後はきちんと起動したのに、再起動後エラー表示が出て、進みません。 困ってます。教えてください。 エラー表示↓ If this is the first time you're seen this stop error screen. restart your Computer. Ifthis scrren appears again, follow these steps. Check for vituses on your computer. Remove any newly installed hard drives or hard drive controllers.Check your hard drive to make sure it is properly corfigured and terminated. Run CHKDSK / F to check for hard drive corruption, and ther restart your computer. Refer to your Getting started maunal for more information on troubleshooting stop errors.