• 締切済み

Windows XPのアップグレードについて

noname#1758の回答

noname#1758
noname#1758
回答No.4

その後如何ですか? 参考URLは、ビデオドライバーの、XP対応版のURLダウンページです。 カード類を外しても駄目という場合は、 メモリーを1枚挿しにしてみる。 ケーブルを換えてみる。 稀ですが、 CD-ROM CD-RW DVD-ROM DVD-RWなどが未対応。 フロッピーが未対応。 このような場合があります。 また、「Win98SEは問題なくセットアップできるのですが・・・。」と返信にありますが、98系の経験は当てにならないと言うか、忘れてください。 と言うのは、98系は、ある意味「フリーズ」を前提として作られています。 此れは、個人ユースがベースにあるからです。 一方、NT系(NT・2000・XP)は、企業ユースが前提です。 詰まり、決してフリーズは許されないのです。 それ故、例えば、 マシンAとA’とA’’が、98系ではAと認識されます。 本来は別のマシンであり、ドライバーも別の物を用意しなければならないのに、98系では動いてしまうのです。 一方、NT系は厳密に区別されます。 そうでなければ、企業ユースには向かないのです。 ですから、98系でインストできたとしても、NT系では無理な場合もあります。 とりあえず、メーカーサイトで、CD-ROMドライブが、XPに対応しているのかを確認してください。

参考URL:
http://www.aopen.co.jp/tech/download/vga/nvidia.htm

関連するQ&A

  • windows xpに関して質問です。

    windows xpに関して質問です。 起動中に、パソコンがジーっと音をたて、突然フリーズしバックがブルーの画面になります。 そこに以下の様な文章が書かれています。 A problem has been detected and windows has been shut down to prevent damage to your computer. KERNEL_STACK_INPAGE_ERROR If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again,follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe Mode to remove or disable components, restart your computer,press F8 to select Advanced Startup options, and then select safe memory. 文章は以上です。 何か設定で改善出来るのでしょうか?

  • Windows7 ブルースクリーンについて

    先日PCを自作したのですが、シャットダウンするときに100%ブルースクリーンになります。 画面には下記のように表示されます。 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: PAGE_FAULT_IN_NONPAGED_AREA If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x00000050 (0xfffff888037f9428, 0x0000000000000000, 0xfffff880037f680a, 0x0000000000000005) *** - Address 0x0000000000000000 base at 0x0000000000000000 DateStamp 0x00000000 いろいろ調べて、試してみてもなかなか有効な解決方法がが見つかりません。 解決するために御助力していただけたら幸いです。 どうかよろしくお願いしますm(_ _)m

  • WindowsXPのクリーンインストールが出来ない。

     Windowsをクリーンインストールしようとしたのですが、 A problem has been detected and windows has been shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new harfware or softwareis properly installed. If this is a new installation, ask your hardware or software marufacturer for any windows updates you might need. If problems continue, disable or remove any rewly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Safe Mode. Technical information: *** STOP: 0x000000ED (0x8474c468, 0x00000000, 0x00000000) と、表示されてセットアップ画面にいきません。

  • Windows XP

    ここ最近、Windowsを開こうとすると、青い画面が出てきます。 「 A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Run a system diagnostic utility supplied by your hardware manufacturer. In particular, run a memory check, and check for raulty or mismatched memory. Try changing video adapters. Diseble or remove any newly installed hardware and drivers. Disable or remove any newly installed software. If you need o use safe mode to remove or disable components, restart your computer, press F8 to select Advanced startup options, and then select safe mode. Technical information: STOP: 0×0000007F  ( 0×0000000D, 0×00000000, 0×00000000, 0×00000000)  」 と英語が書いてあります。 3日経っても直りません。 心当たりがあると言えば、iTunesがエラーになったので、アンインストールの手続きをしたことです。 どうやったら直りますか? お願いします。

  • ブルースクリーンエラー

    少し前に質問させてもらったのですが、やはりまだ頻繁にでるので質問させてください。 ログをとったので対処法を教えてもらえないでしょうか? よろしくお願いします PAGE_FAULT_IN_NONPAGAED_AREA If this is the first time you're seen this stop error screen,restart your computer,If this screen appears again,fallow these steps: check to make sure any new hardware or software is properly installed. Ifthis is a new istallation,ask yore hardware or software manufacturer for any windows updates you mightneed. If problems continue,disable or remore any newly installed hardware or software,Disable BIOS memory options such as caching or shadowing. If you need touse sofeMode to remove or disable components,restart your computer,press F8 to select Advanced startup options,and then select safeMode. Technical in for mationi *** Stop:0x00000050(0xBAO0154,040000000,0x8058388F,0x00000000)

  • Windows XPが起動しません

    会社のノートパソコンWindowsXP(HP社製 中身はCompaq nc4200)ですが 完全にシャットダウンせずに フタを閉じ、持ち歩くことを繰り返していたのですが ある時、PCを開こうとするとパスワードは入力できるものの次の画面で「safe mode」の画面が表示されるようになりました。前回終了時の画面に戻す等やってみたのですが 何度やっても その後 青い画面に 次のような文面が表示されます。 「A problem has been detected and windows has been shut down to prevent damage to your computer. UNMOUNTABLE BOOT VOLUME If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again,follow these steps Check to make sure any new hardware or software is properly installation,ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components,restart your computer,press F8 to select Advanced Startup Options,and then select Safe mode. Technical Information STOP 0X000000ED (0X82F248DO,0XC000009C,0X00000000,0X00000000) この状態だと やはり ハード自体もしくはソフトの故障でしょうか? 保存していたデータすべて消えてしまうのでしょうか? パソコンは エクセル、ワード等は使いこなしているものの本体のことに関しては ほとんど素人ですので 精通している方がいらっしゃれば是非、状況及び解決策を教えていただけないでしょうか? よろしくお願いします。

  • PCが立ち上がらなくなってしまい、困っています2

    先日ブルースクリーン?で困って質問した者です。 英字の内容を書きます。この場合、直るでしょうか? A problem has been detected and windows has been shut down to provent damage to your computer. UNMOUNTABLE_BOOT_VOLME If this is the first time you've seen this stop errer screen, restart your computer.If this screen appears again,follw these steps:check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows up dates you might need. If problems continue,disable or remove any newly installed hardware or software.Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components,restart your computer,press F8 to select Adovanced start up options,and ther select safe mode. Technical information:STOP:0x000000ED(0x865C5C08,0x0000006,0x00000000,0x00000000)

  • ブルースクリーン現象になりました

    質問をさしてもらい ブルースクリーン現象ということが分かり (対処の仕方がわかりません) BlueScreenView を使い (何個かありましたが数が多かったので何個かはりました) ブルースクリーンのところを抜き出してみました ハードディスクのバックアップはとらなくても大丈夫でしょうか A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x9589a9b8, 0x00000002, 0x00000000, 0x82ebb60b) *** ntkrnlpa.exe - Address 0x82e4ffd9 base at 0x82e02000 DateStamp 0x4cb710d6 二つ目 A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000000a (0x00000000, 0x0000001b, 0x00000000, 0x82e95c94) *** ntkrnlpa.exe - Address 0x82e9bfd9 base at 0x82e4e000 DateStamp 0x4cb710d6 三つめ A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe CACHE_MANAGER If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information:

  • パソコンで青い画面

    パソコンで青い画面になってしまい。次のようなメッセージです どこがおかしいのか さっぱりわかりません。ご指導宜しくお願いします。 初心者ですので 可能な限り手順も教えてください。 A problemhas been detectedand windows has been shut down to prevent dama to your computer. MACHINE_CHECK_EXCEPION if this is the first time you've seen this stop error screen. restart your computer. If this screen appears again,follow these steps: check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue,disable or remove any newly installed hardware of software.Disable BIOS memore options such as caching or shadowing If you need to use safe mode to remove or disable components restart select safe mode. Technical information *** STOP:0x0000009C(0X00000004,0X80548EF0,0x82000000,0X00070F0F) Beginning dump of physical memory

  • XPが起動できない

    普通に使っていたのですが、突然ブルー画面で「A probem has been detected and windows has been shut down to prevent damege to your computer. UNMOUNTABLE_BOOT_VOLUME If this screen appears again, follow these steps: check to make sure any new hardware of software is proberly installed. If this is a new installation, ask your hardware of sortware manufacturer for any windows update you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select safe mode. Technical information: *** STOP: 0x000000ED (0x82FEB3D8, 0xC0000006, 0x00000000, 0x00000000)」となり、以降セーフモードも含めてWindowsが起動できなくなりました。松下のCF-W2ですが、リカバリDVDがないのでオークションで探しています。どうしたら良いか、回復方法を教えて下さい。